Mount - Dual Locking Flush Deck Socket with Adjustable & Locking LeveLock Two attractive mirror-polished 18-8 stainless steel flush deck sockets and post sets. The posts are equipped with Magma's versatile LeveLock adjustable locking mount, allowing complete fore and aft adjustment of the table. A push-button lock pin allows use while underway. Sockets feature a flange gasket with an integral flip-up water seal cap. Some fasteners are required for installation. Specifications: Width: 3-7/16 in. (129 mm) Height Full Assembly: 6-1/16 in. (155 mm)  Height Installed: 4-3/16 in. (106 mm) Weight: 2.40 lb. (1.09 kg)

Single Locking Flush Deck Socket w/LeveLock Mount & Flange This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a flange gasket with the integral flip-up water seal cap.  Compatible With: Magma Rectangular Grills and Single Mount Tables  Technical Specifications: Material - 18-8 Stainless Steel and 356 Anodized Aluminum  Dimensions (W x H) - 2-5/8" x 6-1/16" (6.7 x 15.5 cm) Weight - 1.22 lb (.56 kg) *Sold as an Individual 

Dual Locking Flush Deck Socket Mount Two attractive mirror polished 18-8 stainless steel flush deck socket sets, features a push button lock pin and includes a flange gasket with integral flip-up water seal cap.  These sockets mount flush for an uncluttered deck.  Compatible With: Dual Mounted Grills and Tables Technical Specifications: Material - 18-8 Stainless Steel Dimensions (installed) (W x H) - 2-5/8" x 1-15/32" (9.7 x 3.7 cm) Weight - 1.51 lb (.69 kg) *Sold as a Pair

244 Flush Deck Mount With splash cover For all Scotty post mount rod holders Dimensions 4" x 2" x 2" Bolting Dimensions 1 5/16" x 3 3/16" WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dual USB-C Power Socket A dual USB-C Power Socket charges two devices simultaneously. The total output 8A load is split 4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger. Features:  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED illumination  IP65 rating  CE and RoHS compliant Specifications: Output DC: 5V/8A Input: 8-32VDC USB-C Watts: 60W@24V  Plug-In Side Diameter: (inch) 1-7/16"     Length: (inch) 2-1/4" *Sold as an Individual

Power Lock Scotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability. No. 231 Power Lock Rod Holder with No. 244 Flush Deck Mount WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Anchor Lock w/ Flush Deck Mount (P/N 244) Anchor release system for small boats in still-water fishing situations.  Features: Easy lock and release action allows anchor line adjustment with only one hand.  For use with rope up to 1/2' diameter.  Tough construction and roller bearing for smooth, quiet operation. Includes No. 244 Flush Mount Bracket Mount Dimensions: 4" x 2" x 2" Bolting Dimensions: 1-15/16" 3-3/16" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flip Pro with Front Fit Bezel 12/24V Fast Charge Dual USB-A/C Socket Ultra-fast USB charging for the next-generation boater.  Flip Pro is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection and the fastest charging for your device onboard. Ultra-fast USB charging for the next-generation boater.  Flip Pro with a front bezel is designed for use with either a 12V or 24V input and features a 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard. Flip Pro with front bezel was manufactured as an adaption to the original SC-USB-F1 to offer flexibility to installation, as in some cases, it is not possible to gain access to behind panels. Therefore, the front fit bezel provides an alternative route for installation, allowing the option to fit the product from the front using screws. When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in. Featuring a super compact footprint, Flip Pro is constructed from premium, marine-grade materials. and is IPX4 waterproof, making it completely washdown-ready. Flip Pro is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time.  The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices. Universal: Universal fit for any USB-A or USB-C connectors. Fast charge (60W max) up to 2 devices at a time. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Washdown Proof: IPX4 waterproof with the cover closed. Marine Ready: Internal anti-corrosion protective coating UV resistant 316 stainless hinge and spring Electrical Information: Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended)  Standby power draw: 0.01W USB – C output:  60W max on 24V system 36W max on 12V system USB – A output:  36W max The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops.  What is USB-C?  More powerful - Our USB-C has no problems charging even the largest iPad Pro at twice the speed as a USB-A.  More Compact: The slim, oval shape is smaller than USB-A and is also symmetrical and reversible - no more having to flip the cable over to get it into the port! More Flexible: It’s fast becoming the universal connector/charge type on all devices, replacing the USB-A, USB-B, and Micro-USB. New devices are being launched with this charge option only e.g. iPhone 13.

Fly Rod Holder Innovative compact design, Allows hands free trolling with a fly rod. Fully adjustable and includes a safety strap. Includes No. 244 Flush Deck Mount WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

281 Bait Caster / Spinning Rod Holder Holds a bait caster reel in a cushioned cradle. A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top. Includes No. 244 Flush Deck Mount WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

344 Round Flush Deck Mount Sealed base for watertight applications (such as kayak decks) with splash cover. For all Scotty post mount rod holders. Dimensions: 3 3/4" diameter Bolting Dimensions 2 3/16" x 2 3/16" WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Keylocking Flush/Knob Latch - Black Plastic Features: Push button opening Single hole installation Optional ejector spring helps prevent rattles Material: Plastic Color/Appearance: Black Access Restriction: Key Locking Grip Range: 22.300-23.100mm (0.88-0.91") Installation: Threaded body and nut Panel Thickness: 0.000-10.300mm (0.00-0.41in) Style: Pull Tab In Line With Latching Pawl

Non-Locking Flush/Knob Latch - Black Plastic Features: Push button opening Single hole installation Optional ejector spring helps prevent rattles Material: Plastic Color/Appearance: Black Access Restriction: No Restiction Grip Range: 22.300-23.100mm (0.88-0.91") Installation: Threaded body and nut Panel Thickness: 0.000-10.300mm (0.00-0.41in) Style: Pull Tab In Line With Latching Pawl

Suction Cup Twist Lock Base Mount w/X-Grip II Part #: RAM-B-166-UN8U Consists of the universal spring loaded X-Grip II? holder, socket system and 3.25" suction cup twist lock base. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. X-Grip II consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. It expands and contracts for perfect fit of most 7" tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip II. Compatible Devices: Amazon Kindle Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Tab (7" version) Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite, Rubber Tips and Powder Coated Marine Grade Aluminum

Flip Pro Max - Dual USB-C Charge Socket Designed for use with either a 12V or 24V input and features 2x 60W USB-C charging ports. It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops, large tablets, phones, and any other USB-C-powered devices onboard. Features: When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements Red LED running light Universal: Universal fit for any USB-C connectors Fast charge (60W max) up to 2 devices at a time Installation: Easy Install, using a Ø32mm (1.25 in.) hole saw Supplied as standard with an optional front fit bezel Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Key Information: To maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12V or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops Specifications: IP Rating: IPX4 waterproof when lid is closed Input Voltage: 10-30V DC (12/24V System) Input Current Max: 6A (10A fuse recommended) Standby Power Draw: 0.01W USB – C Output: 60W max on a 24V system / 36W max on a 12V system