Lithium 40V Battery Charging Base The 2-amp rapid charge battery charging station charges the battery back to full charge in 2-1/2 hours. Features: 2 amp Rapid Charging, 2.5 hours from empty to full Built-in Cell Optimization, Smart Charging Wall Mountable 2 Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 40V Battery Bag Easily transport, store and protect batteries when not in use. Water-resistant outer shell and insulated padded liner with heavy-duty zipper & handle. Holds 2 batteries or one battery & charging base.  Features: Removable Divider Detachable Shoulder Strap Bag Dimensions - 9” x 8” x 6” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 40V Battery Replacement battery for the Lithium 40v Auger.  Features: 40-volt, 5-amp Hour Lithium ION Battery Internal Battery Management System 4 LED Battery Status Indicator 2 Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 40V Lite Auger - 8" Lighter now, but tougher than ever, the StrikeMaster® Lithium 40V Ice Auger does an amazing job for the diehard ice troller. This durable electric auger does everything a gas drill does, quickly and quietly, and the 40V powerhead is now joined to the lightweight, powerful Lite-Flite Lazer™ Drill Unit for ultimate precision and easy transport, and includes the Lite-Flite Lazer Magnetic Cover hands-free blade guard. As before, the combination of its 15.9:1 planetary gear system delivers impressive torque and cutting power. And because of the advanced Internal Battery Management System, the 40V, 5Ah lithium-ion battery maintains full power to the end of the charge, with no fade-out, so you can keep drilling and reopening old holes with impunity. The StrikeMaster Lithium 40V Ice Auger comes with 1 battery and includes a 2-amp rapid-charging base; to fully recharge a drained battery takes just 2-1/2 hours. To start drilling, just push a button; features both forward and reverse modes, custom impact-resistant long filament handles, ergonomic controls, a deadman safety switch, and built-in LED lights. Features: Tough, quiet, easy to transport Lighter and tougher than ever Lite-Flite Lazer Drill Unit Full segmented flighting Twin serrated stainless steel Lazer blades PowerPoint centerpoint 15.9:1 planetary gear system Impressive torque and power at the push of a button Both forward and reverse modes Impact-absorbing handles Ergonomic controls Deadman safety switch Built-in LED lights 40V, 5Ah lithium-ion battery Internal Battery Management System Includes 2-amp rapid-charging base 2-year limited warranty

Lithium 40V Lite Auger - 10" Lighter now, but tougher than ever, the StrikeMaster® Lithium 40V Ice Auger does an amazing job for the diehard ice troller. This durable electric auger does everything a gas drill does, quickly and quietly, and the 40V powerhead is now joined to the lightweight, powerful Lite-Flite Lazer™ Drill Unit for ultimate precision and easy transport, and includes the Lite-Flite Lazer Magnetic Cover hands-free blade guard. As before, the combination of its 15.9:1 planetary gear system delivers impressive torque and cutting power. And because of the advanced Internal Battery Management System, the 40V, 5Ah lithium-ion battery maintains full power to the end of the charge, with no fade-out, so you can keep drilling and reopening old holes with impunity. The StrikeMaster Lithium 40V Ice Auger comes with 1 battery and includes a 2-amp rapid-charging base; to fully recharge a drained battery takes just 2-1/2 hours. To start drilling, just push a button; features both forward and reverse modes, custom impact-resistant long filament handles, ergonomic controls, a deadman safety switch, and built-in LED lights. Features: Tough, quiet, easy to transport Lighter and tougher than ever Lite-Flite Lazer Drill Unit Full segmented flighting Twin serrated stainless steel Lazer blades PowerPoint Centerpoint 15.9:1 planetary gear system Impressive torque and power at the push of a button Both forward and reverse modes Impact-absorbing handles Ergonomic controls Deadman safety switch Built-in LED lights 40V, 5Ah lithium-ion battery Internal Battery Management System Includes 2-amp rapid-charging base 2-year limited warranty

Lithium 40V Lazer™ Ice Auger - 8" Built from the ground up with the features that make a difference on the ice, the new StrikeMaster® Lithium 40V combines decades of ice-auger experience with leading-edge design and power engineering. This auger will muscle through ice hole after hole. Its 40-volt, 5-amp hour lithium-ion battery powers an electric DC brushless motor for reliable, constant speed and torque. A planetary gear system provides lightweight durability and high power density for unmatched performance. Innovative high-performance cutting via the legendary StrikeMaster® Lazer™ blades provides the fastest cutting edge, period. Custom impact-resistant handles with ergonomically placed opposing deadman/power switch and built-in LED lights. Forward/reverse control runs in forward for cutting and reverse to flush slush from the hole. The 2-amp rapid charge battery charging station charges the battery back to full charge in 2-1/2 hours.  Powerhead/Motor Electric DC Brushless Motor Planetary Gear System 15.9:1 Gear Ratio Power Button with Deadman Safety Switch Forward and Reverse Built-in LED Lights Impact-Resistant Long Filament Handles Blades Twin Serrated Stainless Steel Lazer™ Blades Battery 40V, 5-Amp Hour Lithium ION Battery Internal Battery Management System Ensures Battery Longevity 4 LED Battery Status Indicator 2-Amp Charging Station (Recharges battery in 2-1/2 hours) Battery and Charger Included 100 holes - 8" auger on a single charge* Based on repeated tests with 16" of ice Limited 2-Year Manufacturer’s Warranty on Motor, Battery and Charger WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 40V Lazer™ Ice Auger - 10" Built from the ground up with the features that make a difference on the ice, the new StrikeMaster® Lithium 40V combines decades of ice-auger experience with leading-edge design and power engineering. This auger will muscle through ice hole after hole. Its 40-volt, 5-amp hour lithium-ion battery powers an electric DC brushless motor for reliable, constant speed and torque. A planetary gear system provides lightweight durability and high power density for unmatched performance. Innovative high-performance cutting via the legendary StrikeMaster® Lazer™ blades provides the fastest cutting edge, period. Custom impact-resistant handles with ergonomically placed opposing deadman/power switch and built-in LED lights. Forward/reverse control runs in forward for cutting and reverse to flush slush from the hole. The 2-amp rapid charge battery charging station charges the battery back to full charge in 2-1/2 hours.  Powerhead/Motor Electric DC Brushless Motor Planetary Gear System 15.9:1 Gear Ratio Power Button with Deadman Safety Switch Forward and Reverse Built-in LED Lights Impact-Resistant Long Filament Handles Blades Twin Serrated Stainless Steel Lazer™ Blades Battery 40V, 5-Amp Hour Lithium ION Battery Internal Battery Management System Ensures Battery Longevity 4 LED Battery Status Indicator 2-Amp Charging Station (Recharges battery in 2-1/2 hours) Battery and Charger Included 70 holes - 10" auger on a single charge* Based on repeated tests with 16" of ice Limited 2-Year Manufacturer’s Warranty on Motor, Battery and Charger WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 40V Power Station The StrikeMaster box that rocks! Power it up! This portable package has it all. Utilizing the same Lithium 40V battery as the Lithium 40V augers, it powers a Bluetooth speaker, LED area light, multiple USB ports for a variety of electronic devices, and universal terminals. When plugged into 110V, it recharges the 40V lithium battery. Perfect for powering fish locators and portable LED light kits. Features: Internal 40V battery charger LED charging status indicator LED area light with white and UV options Universal Bluetooth speaker Lighted master power switch Banana plugs with alligator clips 110V charging cord Works only with StrikeMaster's 40V battery (LFV-B) Specifications: 2 USB-A Ports (Output): 5V at 1A maximum 2 USB-C Port (Output): 5V at 1A maximum Universal Positive and Negative Terminals - (Output): 12V at 10A maximum The Average Amount of Times a Device Can Be Charged from One Fully Charged 40V Battery: Smart Phone is 8 recharges, Tablet is 3 recharges, Laptop is 4 recharges, POV Camera is 250 recharges

Lithium 40V Power Adapter A 40-volt battery isn't just for powering an auger. With this adapter, users can utilize the 40-volt battery to charge and operate a variety of electronic devices, like fish locators and portable LED light kits. Features: Lighted master power switch Works only with StrikeMaster's 40v battery Specifications: 2 USB-A Ports (Output): 5V at 1A Maximum 1 USB-C Port (Output): 5V at 1A Maximum Universal Positive and Negative Terminals (Output): 12V at 10A Maximum The Average Amount of Times a Device Can Be Charged from One Fully Charged 40V Battery: Smart Phone is 8 recharges, Tablet is 3 recharges, Laptop is 4 recharges, POV Camera is 250 recharges

Lithium 24V Battery Lithium 24V Auger Replacement Battery 24-volt 4-amp Hour Lithium ION Battery Internal Battery Management System for Long-Life LED Battery Status Indicator 2-Year Warranty. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ECHOMAP™ UHD2 93SV LiveScope™ Plus Ice Fishing Bundle LI with ECHOMAP™ UHD2 93sv, LiveScope Plus System & Lithium-ion Battery Get improved resolution, reduced noise, clearer images, and better target separation with the LiveScope™ Plus Ice Fishing Bundle LI. It includes a 9-inch ECHOMAP™ UHD2 combo, the complete LiveScope Plus System with LVS34-IF transducer, swivel pole mount, and a lightweight lithium battery. Features: Get improved clarity, sensitivity, and Target Separation Scan surroundings with reduced noise and fewer sonar artifacts Use LiveScope™ forward mode so you know where to drill Use LiveScope™ down mode so you can keep an eye on your jig and the fish Fish longer with a 16.5AH lightweight lithium-ion battery Includes a rugged, portable carrying case LiveScope™ Forward sonar shows up to 200’ all around you and below the ice, so you can locate schools of fish and know where to drill the next hole LiveScope™ Down sonar shows live sonar images of what is below the ice, so you can watch fish respond to your jig Where you take your bundle is up to you. But the rugged, portable carrying case lets you easily transport it from hole to hole and season to season ECHOMAP UHD2 Combo Revolutionary real-time sonar pairs with a large 9-inch ECHOMAP UHD2 combo touchscreen display with a keyed assist, allowing you to see up to 200’ in any direction. Two Modes One Transducer LiveScope System offers two live-scanning sonar modes — Down and Forward. It features a transducer cable that stays flexible, even in freezing conditions Garmin Navionics+ Maps You get preloaded Garmin Navionics+ maps for exceptional detail on more than 23,000 U.S. lakes. Custom Combos  You can create custom pages that combine sonar, flashers, and maps on your display. Lithium Battery  Fish even longer with a lightweight 16.5Ah lithium battery that won’t weigh you down on the ice. In the Box: ECHOMAP™ UHD2 chartplotter (version depends on mapping selected) LVS34-IF transducer GLS™ 10 sonar module Ice fishing pole mount Tilt mount Power cable Portable fishing bag with handle Lithium-ion battery Battery charger Documentation General Specifications: Dimensions: 13.8 x 12.2 x 13.0 in. / 35 x 31 x 33 cm Touchscreen: Yes Input: Touchscreen with Keyed Assist Display Size: 7.8 x 4.5, 9.0" in. / 19.8 x 11.5, 22.9 cm Display Resolution: 1024 x 600 pixels Display Type: WVGA, IPS Weight: 22.5 lbs / 10.2 kg Waterproof: IPX7 Maps & Memory: Accepts Data Cards: 1 microSD™ card; 32 GB maximum size Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Ice Fishing Details: Battery Type, Size: Lithium-ion, 16.5Ah Bag Size: Extra Large (XL) Included Transducer: LiveScope™ Plus System with LVS34-IF Transducer Holding Feature: Pole mount Sensors: Has Built-in Receiver: Yes     Receiver: 10 Hz NMEA 2000 Compatible: Yes     GPS: Yes Glonass: Yes     Galileo: Yes   Beidou: Yes Supports Waas: Yes Supports Multi-Band, Multi-Constellation GPS: Yes Built-in Maps: Built-in Auto Guidance+: Yes (downloadable via ActiveCaptain app) Garmin Navionics+ Inland & Coastal: Yes (see Additional) Garmin Navionics+ (Inland): Yes (see Additional) Optional Map Support: Garmin Navionics+: Yes Garmin Navionics+ VIision+™: Yes TOPO: Yes     Standrad Mapping: Yes Garmin Quickdraw Contours: Yes Chartplotter Features:  ActiveCaptain® Compatable: Yes Electrical Features: Power Input: 9 to 18 Vdc Sonar Features & Specifications: Displays Sonar: Yes Power Output: 500 W Traditional Sonar (Dual Frequency/Beam): Built-in (single channel CHIRP, 50/77/83/200 kHz, L, M, H CHIRP) ClearVü™: Built-in 260/455/800/1000/1200 kHz SideVü™: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope; Yes Connections: NMEA 2000® Ports: Yes Garmin Marine Network Ports: 1 12-Pin Transducer Ports: 1 Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes Additional: Garmin Navionics+ Inland & Coastal: 95sv Canada Garmin Navionics + (Inland): 95sv U.S. Lakes WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

PS2 Auto 15A - 2-Bank Lithium/AGM Battery Charger Latest Technology: Detects if your battery is Lithium or AGM Automatically charges both Lithium and AGM batteries for optimal performance Fully automatic. Completely and safely charges both Lithium and AGM batteries Algorithms designed and validated with battery manufacturers for a 100% charge Startup feature will wake up batteries that have turned off due to low voltage protection Auto return to charge feature Quickest charge times in its class Unbeatable performance, reliability, safety, and quality delivered by DUAL PRO® Features: Waterproof - Use on land and in fresh and saltwater TROUBLE-FREE—Just Plug It In and Forget It! Independent outputs Fully automatic/multi-stage charging On-board diagnostic codes FCC 15 Parts A & B interference compliant Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410) 3-Year Warranty AutoProfile Intuitive Charging Technology Lithium/AGM Professional and Sportsman Series chargers have set the standard in the marine industry for more than two decades, known as the safest, most reliable, and best performing chargers in the industry. AutoProfile Intuitive Charging Technology provides flexibility for your charging system, ready for the ever-changing lithium battery technologies. No matter if you choose Lithium or AGM batteries for your boat, Dual Pro is ready to keep your boat on the water longer, enhancing battery performance and extending battery life. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Charge Mate Pro Lithium 90 Current limited electronic charge relay with high efficiency and reverse current protection A secondary battery on board requires a dedicated charging solution. The Charge Mate Pro makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example. The Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro. A marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips in the onboard electrical network. The Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications. The Charge Mate Pro 90 ensures a higher charge current for example when charging Lithium-Ion batteries. It is also perfectly suitable for large automotive alternators up to 180 A and can be used in parallel operation with a 225 Amp alternator to fulfill even higher continuous power demands of your equipment on board. Charge Mate Pro: for controlled charging from a single source. Applications: Leisure and professional marine and mobile applications. An effective solution for high power demand on board and/or the need for prioritized or current limited charging. Features: Charges two battery banks from a single source. Electronic charge coupling with very low voltage drop. Makes effective dual charging possible. Suitable for Lithium Starter Batteries and AGM/GEL/Lithium Service Batteries Charge current secondary battery limited to 40A or 90A. High system reliability by prioritizing charging of the main battery. Unidirectional which blocks return current under all circumstances. Prevents power dips in the onboard electrical network. Suitable for all kinds of chargers and alternators. Monitoring with LED status indication. IP65 electronics in a corrosion-resistant casing with aluminum heat sinks. Fast and easy installation General Specifications: Monitoring: LED (warnings and status indication) Output current: Limited to 90 A Number of battery outlets: 2 Input voltage range: 9-32 V Parallel configuration: Yes Battery voltage: Automatic 12/24 V detection Remote switch functions: On, off, auto, start assist Dimensions, hxwxd: 157 x 140 x 80 mm/6.2 x 5.5 x 3.1 inch Weight: 0,88 kg/1.9 lb Compliance: CE Technical Specifications: Connection possibilities: 3 x fast-on connectors (switch, ground, and status) • switch: for an optional single pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator Power consumption: Switch open: < 1 mA at 12/24 V DC Battery types: Suitable for charging from Lithium starter batteries to all types of batteries (for AGM/GEL starter battery applications, please use 83309002) Switch on voltage: 13.7 V (12 V) / 27.4 V (24 V) Switch on delay: 5 sec Switch off voltage: 13.3 V (12 V) / 26.6 V (24 V) Switch off delay: 2,5 sec Relay: Electronically (MOSFETs with a low voltage drop of max 0.2 V) Temperature range (ambient temp.): -40 °C to 60 Protection degree: IP65

Charge Mate Pro Lithium 40 Current limited electronic charge relay with high efficiency and reverse current protection A secondary battery on board requires a dedicated charging solution. The Charge Mate Pro charging relay makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example. The Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro. A marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips of the onboard electrical network. The Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications.  Charge Mate Pro: for controlled charging from a single source. Applications: Leisure and professional marine and mobile applications. An effective solution for high power demand on board and/or the need for prioritized or current limited charging. Features: Electronic charge coupling with very low voltage drop. Makes effective dual charging possible. Suitable for charging from Lithium starter batteries to AGM/GEL/Lithium service batteries. Charge current secondary battery limited to 40 A. High system reliability by prioritizing charging of the main battery. Unidirectional which blocks return current under all circumstances. Prevents power dips in the onboard electrical network. Suitable for all kinds of chargers and alternators. Monitoring with LED status indication. IP65 electronics in a corrosion-resistant casing with aluminum heat sinks. Fast and easy installation General Specifications: Monitoring: LED (warnings and status indication) Output current: Limited to 40 A Number of battery outlets: 2 Input voltage range: 9-32 V Parallel configuration: Yes Battery voltage: automatic 12/24 V detection Remote switch functions: On, off, auto, start assist Dimensions, hxwxd: 157 x 140 x 80 mm/6.2 x 5.5 x 3.1 inch Weight: 0,88 kg/1.9 lb Compliance: CE Technical Specifications: Connection possibilities: 3 x fast-on connectors (switch, ground, and status) • switch: for an optional single pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator Power consumption: Switch open: < 1 mA at 12/24 V DC Battery types: Suitable for charging from Lithium starter batteries to all types of batteries (for AGM/GEL starter battery applications, please use 83304002) Switch on voltage: 13.7 V (12 V) / 27.4 V (24 V) Switch on delay: 5 sec Switch off voltage: 13.3 V (12 V) / 26.6 V (24 V) Switch off delay: 2,5 sec Relay: Electronically (MOSFETs with a low voltage drop of max 0.2 V) Temperature range (ambient temp.): -40 °C to 60 Protection degree: IP65

Lynx Smart BMS 1000 Battery Management System for Lithium Smart Batteries The Lynx Smart BMS is a dedicated Battery Management System (BMS) for the Victron Lithium Battery Smart batteries. These batteries are Lithium Iron Phosphate (LiFePO4) batteries and are available in 12.8 V or 25.6 V in various capacities. They can be connected in series, parallel, and series/parallel so that a battery bank can be built for system voltages of 12V, 24 V, or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12 V and up to 102 kWh in a 24 V1) and 48 V1) system. Out of the various available BMSes, the Lynx Smart BMS is the most feature-rich and complete option and integrates seamlessly into the Lynx Distributor system. This model is a 1000 A (M10) version. Built-in 1000 A Contactor The contactor acts as a secondary safety system to protect the battery in case the primary controls (ATC, ATD, and/or DVCC) fail to disable loads and/or chargers when required and is also suitable as a remote controllable main system switch. Pre-charge Circuit In addition to the contactor, a built-in pre-charge circuit prevents high inrush currents when connecting a capacitive load such as a MultiPlus/Quattro or other inverter, eliminating the need for external pre-charging. Monitoring and Control Monitor and control the BMS via Bluetooth using the VictronConnect App or a GX device such as a Cerbo GX and the VRM Portal. A built-in battery monitor that operates similarly as the other Victron Energy battery monitors, provides data such as state of charge, voltage, current, historical data, status info, and more in real-time and with instant readout even without the need to connect to the BMS, allowing diagnostic at a glance. DVCC closed Loop Control as Well as ATC/ATD Contacts Compatible Victron inverters/chargers and solar chargers are automatically controlled via a connected GX device and DVCC. The ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off port. Programmable Relay The relay can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable). In Alternator ATC mode, the relay will only activate when the contactor is closed. Alternator ATC contact of the alternator opens first and then with a delay of 2 seconds the contactor. These 2 seconds ensure that the alternator is switched off before the battery is disconnected from the system. AUX Terminal The advantage of the onboard auxiliary power supply (1.1 A @ system voltage) is to provide power to specific loads (i.e. a GX device) after the BMS has shut down the loads in the event of a low cell voltage event. If no charge voltage is detected within 5 minutes, the BMS, including the AUX connection switches off. VE.Can and NMEA 2000 Data Communication VE.Can allows for easy connection (standard RJ45 network cable) and communication with a GX device. Since the CANbus protocol is based on NMEA 2000 (and J1939), it is easy to integrate into a marine network and feed a marine MFD with data (requires a VE.Can to NMEA 2000 micro-C male cable). Lynx Distributor Fuse Monitoring Read out the fuse status and receive an alarm in case a fuse is blown. The Lynx Smart BMS monitors up to 4 connected Lynx Distributors and their fuses via VictronConnect or a GX device 1) To reduce the required balancing time, we recommend using as many different batteries in series as possible for the application. 24 V systems are best built using 24 V batteries, and a 48 V system. This System Contains the Following Components: Lynx Distributor with 2 fused paralleled lithium-ion smart batteries. Lynx Smart BMS with BMS, contactor, and battery monitor A second Lynx distributor provides fused connections for inverter/charger(s), loads and chargers (additional modules can be added if more connections are needed) A Cerbo GX (or other GX device) to read out the Lynx Smart BMS and Lynx Distributor data. Power Specifications: Battery Voltage Range: 9 – 60 VDC Maximum Input Voltage: 75 VDC Supported System Voltages: 12, 24, or 48 V Reverse Polarity Protection: No Main Safety Contactor Continuous Current Rating: 1000 A continuous Main Safety Contactor Peak Current Rating: 1200 A for 5 minutes  Power Consumption OFF Mode: 0.3 mA for all system voltages Power Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V) Power Consumption in ON Mode: Approx. 2.6 W (217 mA at 12 V) depending on the state of the relays Approximately 4.2 W (350 mA at 12 V) depending on the state of the relays Minimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems, 20 Ω and above for 24 V and 48 V systems AUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse Allow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by a resettable fuse Allow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by a resettable fuse Alarm Relay (SPDT) Maximum current Rating: 2 A at 60 VDC Connections: Busbar: M10 (Torque: 17 Nm) VE.Can: RJ45 I/O: Removable multi-connector with screw terminals Battery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected in one system Lynx Distributor fuse monitoring (up to 4 modules) RJ10 (cable ships with each Lynx Distributor) Physical Specifications: Enclosure Material: ABS Enclosure Dimensions (h x w x d): 230 x 180 x 100 mm Unit Weight: 2.7 kg Busbar Material: Tinned copper Busbar Dimensions (h x w): 8 x 30 mm Environmental Specifications: Operating Temperature Range: -40 °C to +60 °C Storage Temperature Range: -40 °C to +60 °C Humidity Max.: 95 % (non-condensing) Protection Class: IP22 Standards Safety: EN-IEC 63000:2018 EMC: EN-IEC 61000-6-3:2007/A1:2011/AC:2012 QMS: NEN-EN-ISO 9001:2015 Please contact your dealer for any returns, repairs or support issues related to this product.