|
Fillet Table Rod Holder Gimbal Mount
Gimbaled Rod Holder Mounting Accessory works on all of our fillet tables (326510-3, 326515-3, 326580-3, and 326585-3) and comes complete with hardware to mount to the table. Great for mounting a variety of accessories.
|
86.35 |
|
|
Rod Holder Gimbal Mount Fillet Table - 30"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Large, 30" by 12-5/8" deep with towel bar.
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders, large has hose holder and towel bar
Knives and pliers not included
|
155.89 |
|
|
Rod Holder Gimbal Mount Fillet Table - 20"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Medium, 20" wide by 12-5/8" deep,
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders
Knives and pliers not included
|
135.61 |
|
|
Fillet Table Only - 30"
Features:
UV stabilized high-density polypropylene
Solid one-piece construction for long life and easy maintenance
Large, 30" wide by 12-5/8" deep, includes hose holder and towel bar
Easily accessible knife and pliers holders
Knives and pliers not included
DOES NOT INCLUDE MOUNTING HARDWARE
|
89.23 |
|
|
Fillet Table Only - 20"
Features:
UV stabilized high-density polypropylene
Solid one-piece construction for long life and easy maintenance
Medium, 20" wide by 12-5/8" deep
Easily accessible knife and pliers holders
Knives and pliers not included
DOES NOT INCLUDE MOUNTING HARDWARE
|
60.84 |
|
|
ShadeFin Adjustable Rod Holder Mount
Lightweight and versatile, the Adjustable Rod Holder Mount for ShadeFin makes adding shade to your boat easy! Sliding the gimbal-slot butt end over the rod holder’s gimbal pin makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening is oversized for the mount’s shaft. Verify that the gimbal slot on the mount is mated with the pin in the rod holder, or Adjustable Telescopic Gunnel-Mount, insert the ShadeFin, adjust to your preferred shade angle and enjoy.
Features:
Manufactured from Type-316L stainless steel
Features soft-touch knob for easy and secure angle adjustment
Adjusts every 15º with safety detents
Gimbal-slot butt end for secure rod holder placement
Features white nylon sleeve for additional rod holder stabilization
Includes self-aligning notch and pin-locking hole
1-year limited warranty
|
318.43 |
|
|
60° Rod Holder Grill Mount
Kuuma's 60° Rod Holder Grill Mount enables you to turn your fishing rod holder into a grill mount. The mount has a 60° angle and an adjustable height of up to 5".
It fits most 60° rod holders with cross pins. The mounting plate is constructed of durable Stainless Steel and the extension rod is constructed of resilient Aluminum for strength.
Compatible With:
All Kuuma grills
Features:
Allows you to turn your fishing rod holder into a grill mount
Adjustable Height
Fits most 60° rod holders with cross pins
Measurements: 13-inches (height) x 5-inches (width) x 5-inches (depth)
Dimensions (H x W x D) - 13" x 5" x 5"
Includes all necessary hardware for easy mounting
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.09 |
|
|
Rail Mount Adjustable Rod Holder Fits Diameter 1-11/16" - Formed & Cast 316 Stainless Steel
This Rail Mount Rod Holder can accommodate rods up to 1-11/16” in diameter. Features a front mount adjustment screw, allowing easy adjustment without having to disassemble the rail mount brackets. Designed to fit 7/8” to 1” diameter tubing. A leash on the rod and/or reel is recommended when using rail mount rod holders. Constructed of corrosion resistant formed and cast 316 stainless steel with black plastic end cap.
|
67.44 |
|
|
Dual Rod Holder/Front Mount
Front-mount rod holder fits all 1 5/16" diameter Cannon booms, including telescopic boom. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracked.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
56.06 |
|
|
DUAL AXIS ADJUSTABLE ROD HOLDERS DOWNRIGGER MOUNT
Mount our dual axis rod holders between the mounting base and swivel base of your Cannon downrigger for unparalleled rod positioning. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to easily pull the holder to a vertical position. Full 360 degree rotation makes it the ultimate fishing accessory.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
371.57 |
|
|
Triple Rod Holders
Scotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and tools
No. 362 Triple rod holder permanent mount board only
|
26.26 |
|
|
Adjustable Rod Holder Extender
Provides the option for you to position your Scotty Rod Holder into that perfect fish fighting location. Conveniently position your rod holder closer to you on your kayak or your downrigger to eliminate reaching for your rod. Can be used in conjunction with any previous Scotty Downrigger Boom Mounted Rod Holder to bring the fish fighting action closer to you.
Extends the height of a rod holder by 6-1/2"
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
15.17 |
|
|
LED RGB Rod Holder with Tube Insert
These LED RGB Rod Holders to have translucent tube inserts with bright RGB LEDs and a 30° angle. Or retrofit your existing rod holder with the LED RGB Tube Insert (325189, sold separately). Just remove your existing liner, install the LED RGB Tube Insert, and cut to your mounting face angle. A Bluetooth Smart Phone Controller (403051-1, sold separately) lets you operate this RGB LED Rod Holder from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB rod holders with an optional terminal block (426624, sold separately).
Specifications:
Constructed of formed 304 stainless steel
Patented
Watts: 2.6W
Voltage: 12V
|
67.98 |
|
|
290 R-5 Universal Rod Holder w/Mount
The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.
The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.
Features:
Easy adjustable lock bar tension
Designed and built to withstand all conditions and backed by the Scotty name
In the Box:
290 R-5 rod holder
241 Side deck mount
*Sold as an Individual
|
25.96 |
|
|
Heavy-Duty Adjustable Rod Holder with Combo Mount - White
This rod holder is designed for use with baitcasting and spinning reels.
Features:
An ergonomic design and easy-to-find rapid-release latch
Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings
Specifications:
Color: White
*Sold as an Individual
|
18.29 |
|