Econo Mate Bait/Filet Table - 12" Magma’s versatile Econo Mate bait and fillet tables are constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood fillet tables.  Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation and service.  The material will not crack, peel, mildew, absorb bacteria or fish odors.  With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.   The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety.  Completely assembled with nothing else to buy make this the perfect compact bait/fillet table for the Fisherman who is on a budget or limited for space. Features: Slotted back allows for drainage from work surface All edges and corners rounded for safety FDA approved for food service UV stabilized Will not crack, peel, mildew, or retain fish odors Includes tool holders for easy access to fillet knives and pliers  Technical Specifications: Material - 100% High Density Color Core Polyethylene Table Dimensions (L x W x H) - 16" x 12-3/8" x 1-7/8"  (508 x 398.2 x 34.9 cm) Weight - 4.5 lbs (2.04 kg) Mount - Hinge lock In the Box: 12" Econo Mate Table  Mounting hardware Instruction manual *Sold as an Individual

Econo Mate Bait/Filet Table - 20" Magma’s versatile Econo Mate bait and fillet tables are constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood fillet tables.  Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation and service.  The material will not crack, peel, mildew, absorb bacteria or fish odors.  With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.   The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety.  Completely assembled with nothing else to buy make this the perfect compact bait/fillet table for the Fisherman who is on a budget or limited for space. Features: Slotted back allows for drainage from work surface All edges and corners rounded for safety FDA approved for food service UV stabilized Will not crack, peel, mildew, or retain fish odors Includes tool holders for easy access to fillet knives and pliers  Technical Specifications: Material - 100% High Density Color Core Polyethylene Table Dimensions (L x W x H) - 15-5/8" x 20" x 1-3/8"  (398.15 x 508 x 34.93 cm) Weight - 6.7 lbs (3.04 kg) Mount - Hinge lock In the Box: 12" Econo Mate Table  Mounting hardware Instruction manual *Sold as an Individual

41" First Mate Dual Mount Filet Table - White & Black Magma’s First Mate dual-mounted cutting/food service tables are a larger version of the single-mount tables and include an engraved logo and ruler that show the black core for a clean look while increasing visibility when measuring the day's catch. Not just designed for bait preparation or fish cleaning, these tables can also be used for food or cocktail service. The heavy-duty Dual Mount design gives you the strength of a workbench with the convenience of Magma’s quick-release mount systems for compact storage. Features: Engraved ruler This cutting and serving table is the perfect addition for any fisherman when it’s time for bait work or filleting Constructed with commercial quality compression-molded high-density polyethylene (indestructible, more practical, will not absorb fish odors, and more sanitary than wood filet tables) Polyethylene is UV-stabilized and FDA-approved for mildew-free, crack-free, and maintenance-free use Includes: Equipped with (2) redesigned knife holsters that accommodate larger fillet knives, Handy receptacle for pliers Four-inch side/back guard with rounded edges and corners for safety, Side channels with slotted back corners that permit drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting Dimensions: Length (inch): 41" Width (inch): 12.5"

Mate USA M164-020-12 12V GEAR PMP FOR LUBR OIL Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.   Part n.16402012 Product NameUP3/OIL Voltage (V)12 Consumption (A)5 Fuse (A)7.5 Self-priming (m)1 Flow rate ⌀ 6 (l/h)20 Flow rate ⌀ 8 (l/h)60 Flow rate ⌀ 13 (l/h)330 Hose (mm)13 Pressure (bar)2 Ports (BSP)3/8″ Motor power (W)90

Mate USA M164-080-12 12V GEAR PUMP FOR LUBR OIL Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.   Part #: 16408012 Product Name: UP6/OIL Voltage (V): 12 Consumption (A): 7 Fuse (A): 10 Self-priming (ft): 4.9 Pressure (psi): 72.5 Flow rate ø 6 (gpm): 0.11 Flow rate ø 8 (gpm): 0.33 Flow rate ø 13 (gpm): 2.1 Ports (BSP): 3/8" Hose (ID) (in): 1/2" IP Protection: 67 Motor power (W): 180  

Mate USA M164-520-12 12V GEAR PUMP FOR LUBE OIL 4.8 GPM Self-priming electric pump with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.   PART #: M164-520-12 VOLTS: 12 GPM: 2.6 AMPERE: 4A PORTS: 1/2" NPT

Mate USA M162-004-12 Water Pump with Nitrile flexible impeller UP1-J GPM: 7.4 GPM Volt: 12V & 24V Gpm: 7.4 Psi: 15 Fresh water: Yes Salt water: Yes Greywater: Yes   This Mate USA 7.4 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

Mate USA M162-010-12 Integrated Switch Pump with Flexible impeller UP1-JS 7.4 GPM ON-OFF Switch Pump Volt: 12V & 24V at 8 amp Gpm: 7.4 Psi: 15 Ports: 1/2" BSP int. Fresh water: Yes Salt water: Yes Greywater: Yes   This Mate USA 7.4 GPM Self-priming electric pump with flexible rubber impeller and ON-OFF switch integrated into the water-proof cap. Ideal for bilge and waste water on any type of boat.

Mate USA M162-002-12 Water Pump with Nitrile flexible impeller UP1 GPM: 9.2 Volt: 12V Gpm: 9.2 Psi: 15 Fresh water: Yes Salt water: Yes Greywater: Yes   This is the Mate USA 12vdc 9.2 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

Mate USA M164-022-12 Integrated Switch Pump with Bronze Gears UP3/OIL-R Low Speed Reversible Pump Volt: 12V Amps: 6 Ports: 3/8" NPT Oil: Yes   This Mate USA Self-priming electric pump with bronze gears has a 3 positions switch to reverse the flow direction. For oil and viscous liquids transferring.

Mate USA M162-006-12 Fresh, Bilge & Grey Water Pump With Nitrile Impeller UP1-M 11.9 GPM Volt: 12V Fuse: 14A Gpm: 11.9 Ports: 1" Barb Psi: 22 Fresh water: Yes Salt water: Yes Greywater: Yes   This Mate USA 11.9 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

Mate USA M164-006-12 12V PORT GEAR PMP KIT 4GPM Self-priming electric pump with bronze gears for diesel transfer. Featuring a new case with handle for improved protection and easy transport. Completed by On/Off switch, cable with integrated fuse and battery clips. Product Name Marco UP3-CK Portable gear pump kit 4 gpm - 15 l/min (12 Volt) 13 Voltage (V)12 Consumption (A)6 Fuse (A)10 Self-priming (m)  1.5 Flow rate (l/min)  15 Hose (mm)13 Pressure (bar)2 Ports (BSP)3/8″   Motor power (W)120  

Mate USA M166-024-12 12V REFUEL KIT W/11.9 VANE PUMP VP45-K Diesel Refueling Kit   Portable diesel refueling kit which includes everything you need to transfer diesel fuel from one tank or gerry can to another. The kit includes a vane pump with an integrated bypass valve, battery clips, refueling gun, 2m (6.5 ft) intake hose, 4m (13 ft) delivery hose, and a filter that connects to the end of the intake hose. • 45 liter/min (11.9 gal/min) vane pump with handle and switch • Integral bypass valve relieves pressure when pump is on, but no fuel transfer is occurring • Self-priming to 1.5m (4.9 ft) Voltage: 12V DC Output Pressure: 17.4 psi (12 bar) Amp Draw: 7 - 16.5A Ports: 1" (25mm) Flow Rate: 11.9 gal/min (45 l/min) Fuse: 15A

Mate USA M164-200-12 12V GEAR PUMP 2.6 GPM DIESEL FEATURES Pump Body: Nickel Plated Brass Port Size: 3/8" BSP (British) Female Threaded Ports and 3/8" NPT Male Threaded Ports Flow: Up To 2.6 GPM Pressure: 21.8 PSI Gears:Bronze Shaft Seal: Lip Type Shaft: Stainless Steel Motor:12 Volt  Heavy Duty Ball Bearing Design Motors are ISO 8849 Marine (Bilge Standard) IP Protection 67   APPLICATIONS Diesel Transfer Refueling, Light Weight Oils, Fresh Water and Glycol Antifeeze  

Mate USA M164-220-12 12V GEAR PUMP FOR LUBR OIL Voltage: 12V DC Capacity: 0.85 gpm @ 80°F; 1.0 GPM @ 115°F (Max.) Type: UP2/Oil - Gear Pump for Lubricating Oil Transfer Dimensions: 5"L x 4-3/8"W x 4"H Fuse: 3A Self-Priming: 3.3 ft (1 m) Max. Amp Draw: 2.7A Max. Flow @ 80°F: 0.85 gpm Max. Flow @ 100°F: 0.92 gpm Max. Flow @ 115°F: 1.0 gpm • Connections — 3/8" male NPT (tapered) O-ring sealed adpaters threaded into 3/8" female BSPP ports in the pump head • Nickel-plated brass body, stainless steel shaft, and helical bronze gears • Small, compact footprint for its output • Vibration absorbing rubber mounting feet • Rated for intermittant duty • Not ignition protected - NOT for use with gasoline   NOTE: No Transfer Pump should be used with Gasoline unless it says it is made for it.