|
20" Adjustable Poly Filet Table
Filet table designed for extreme durability with U.V. resistance. Can be used for cutting bait, fileting fish or serving food and beverages. Made from FDA approved, high density polyethylene that will not discolor, crack,
mildew or absorb fish odors and is easy to clean. They feature a storage slot for your filet knife and fishing pliers.
The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, brightdip anodized pipe to fit all standard size rod holders. The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used. All fasteners are stainless marine grade quality.
Features:
FDA-approved, UV-stabilized, high density Polyethylene table
Holds a knife and a plier
Drainage openings for easy clean-up
Anodized Aluminum mount fits into any standard gunnel rod holder
Rugged engineered nylon tilt mount locks at many angles
Folds flat for storage under deck
Stainless fasteners & easy to assemble mount
Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at
Limited one year warranty
Made in USA
|
131.99 |
|
|
32" Adjustable Poly Filet Table
Filet table designed for extreme durability with U.V. resistance. Can be used for cutting bait, fileting fish or serving food and beverages. Made from FDA approved, high density polyethylene that will not discolor, crack,
mildew or absorb fish odors and is easy to clean. They feature a storage slot for your filet knife and fishing pliers.
The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, brightdip anodized pipe to fit all standard size rod holders. The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used. All fasteners are stainless marine grade quality.
Features:
FDA-approved, UV-stabilized, high density Polyethylene table
Holds a knife and a plier
Drainage openings for easy clean-up
Anodized Aluminum mount fits into any standard gunnel rod holder
Rugged engineered nylon tilt mount locks at many angles
Folds flat for storage under deck
Stainless fasteners & easy to assemble mount
Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at
Limited one year warranty
Made in USA
|
149.99 |
|
|
|
|
|
Poly-Flex II Extra Wide Series Styled-to-Fit Boat Cover for 20.5' Aluminum Boats with High Forward Mounted Windshield - Grey
*102" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Poly-Flex II
Good Quality
Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
462.89 |
|
|
Drink Holder
Drink holder with bulkhead/gunnel mount and rod holder post mount
For cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removable
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
14.20 |
|
|
SHURflo 94-236-20, PUMP HEAD KIT
Pump Head, Santoprene Valves, Santoprene Diaphragm, Polypropylene Housing, 3.0 Cam, Check Valve, 20-45 PSI Adjustable Switch
|
150.09 |
|
|
Oberdorfer N992-C81-W Pump &Amp; Motor Painted White
FEATURES
Pump Body:
Bronze
Ports:
3/8" NPT
Flow:
5.9 GPM Max
Pressure:
150 PSI Max
Bearings:
Carbon Graphite Bearings, Self-Lubricating
Gears:
Durable bronze helical gears
Shaft Seal:
Buna Lip Seal Standard, Optional Viton Lip Seal.
Shaft:
303 Stainless Steel Shafts
Motor / Drive:
Compact close-coupled design attaches to motors with adaptor brackets. We have many motor options and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump, Bronze, 3/8"NPT Ports, Buna Lip Seal, 12V 1/4HP Motor, Painted White
|
1938.46 |
|
|
Hunting & Fishing Supplies
|
|
|
Bait/Filet Mate Table - 20"
The Magma logo and ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation or service.
Constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood filet tables. These tables will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger fillet knives, handy receptacle for Pliers, rounded edges/corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
Features:
Slotted back allows for drainage from work surface
All edges and corners rounded for safety
FDA approved for food service
UV stabilized
Will not crack, peel, mildew, or retain fish odors
Technical Specifications:
Material - 100% High Density Color Core Polyethylene
Table Dimensions (W x W x H) - 12-1/3" x 19-7/8" x 1-7/8" (31.32 x 50.4 x 4.8 cm)
Weight - 6.05 lb (4.72 kg)
Mounting Application - Single Mount
In the Box:
20" Bait/Filet Mate Table
Instruction manual
*Sold as an Individual
|
107.99 |
|
|
41" First Mate Dual Mount Filet Table - White & Black
Magma’s First Mate dual-mounted cutting/food service tables are a larger version of the single-mount tables and include an engraved logo and ruler that show the black core for a clean look while increasing visibility when measuring the day's catch. Not just designed for bait preparation or fish cleaning, these tables can also be used for food or cocktail service. The heavy-duty Dual Mount design gives you the strength of a workbench with the convenience of Magma’s quick-release mount systems for compact storage.
Features:
Engraved ruler
This cutting and serving table is the perfect addition for any fisherman when it’s time for bait work or filleting
Constructed with commercial quality compression-molded high-density polyethylene (indestructible, more practical, will not absorb fish odors, and more sanitary than wood filet tables)
Polyethylene is UV-stabilized and FDA-approved for mildew-free, crack-free, and maintenance-free use
Includes:
Equipped with (2) redesigned knife holsters that accommodate larger fillet knives,
Handy receptacle for pliers
Four-inch side/back guard with rounded edges and corners for safety,
Side channels with slotted back corners that permit drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting
Dimensions:
Length (inch): 41"
Width (inch): 12.5"
|
108.00 |
|
|
Bait/Filet Mate Table w/LeveLock® Mount - 31"
Magma’s original Bait/Fillet Mate tables include an engraved logo and ruler that shows the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation or service. Constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood fillet tables. These tables will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use.
Equipped with (2) knife holsters, receptacle for pliers, rounded edges/corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most popular mount and has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance. It’s quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage. The 1-1/2” (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.
Features:
Slotted back allows for drainage from work surface
All edges and corners rounded for safety
FDA approved for food service
UV stabilized
Will not crack, peel, mildew, or retain fish odors
LeveLock® quick release all angle rod holder mount
Technical Specifications:
Material - 100% High Density Color Core Polyethylene
Table Dimensions (L x W x H) - 31" x 12-1/3" x 3-7/8" (78.74 x 31.24 x 9.65 cm)
Weight -
Mount - LeveLock® all-angle fish rod holder mount
In the box:
31" Bait/Filet Mate Table
LeveLock® Mount
Mounting hardware
Instruction manual
*Sold as an Individual
|
251.99 |
|
|
20' Carbon Fiber Outrigger Poles - Pair - Black
Carbon Fiber/Stainless Steel/Black
Taco Sport Fishing introduces their first ever Carbon Fiber Outrigger Poles for the ultimate offshore fishing experience. Our "Patent Pending" innovative design was built to meet the demands of today's modern fishing techniques and for those who need to get the most out of their high performance fishing boats on the market.
The Carbon Fiber Poles are by far stronger and lighter than any other aluminum poles on the market today. The cylindrical design has the strength built into it to allow for today's modern fishing techniques of pulling dredges of ballyhoo, mullet or squids through the water at higher speeds that would be difficult to achieve with aluminum poles.
Features:
UV-resistant, clear coated Black Carbon Fiber pole construction
Stainless Steel Type 316 collars and rings
Double Brass rollers allow for easy line rigging
Double outrigger line design on the 16' and triple outrigger line design on the 20' for either mono or dacron
Swivel roller design mechanism allows for a more natural swimming action which will result in hooking up more fish
Telescopes to less than 8' for bridge clearance, trailering and storage
Designed for use with universal or Taco Sport Fishing Grand Slam mounts that accept 1-1/2" outriggers
16' ideal for boats under 35', 20' ideal for boats up to 50'
Includes a nylon mesh carry bag to protect poles
Includes adjustable line caddy with brass rollers allows for easy rigging to the t-top or the gunnel
Sold in Pairs
One year limited warranty
|
3012.39 |
|
|
Bait/Filet Mate Table - 31"
The Magma logo and ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation or service.
Constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood filet tables. These tables will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger fillet knives, handy receptacle for Pliers, rounded edges/corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
Features:
Slotted back allows for drainage from work surface
All edges and corners rounded for safety
FDA approved for food service
UV stabilized
Will not crack, peel, mildew, or retain fish odors
Technical Specifications:
Material - 100% High Density Color Core Polyethylene
Table Dimensions (W x L x H) - 12-1/3" x 32" x 1-7/8" (31.32 x 81.28 x 4.8 cm)
Weight - 10.4 lb (4.72 kg)
Mounting Application - Single Mount
In the Box:
31" Bait/Filet Mate Table
Instruction manual
*Sold as an Individual
|
155.99 |
|
|
Econo Mate Bait/Filet Table - 20"
Magma’s versatile Econo Mate bait and fillet tables are constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood fillet tables.
Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation and service. The material will not crack, peel, mildew, absorb bacteria or fish odors. With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.
The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety. Completely assembled with nothing else to buy make this the perfect compact bait/fillet table for the Fisherman who is on a budget or limited for space.
Features:
Slotted back allows for drainage from work surface
All edges and corners rounded for safety
FDA approved for food service
UV stabilized
Will not crack, peel, mildew, or retain fish odors
Includes tool holders for easy access to fillet knives and pliers
Technical Specifications:
Material - 100% High Density Color Core Polyethylene
Table Dimensions (L x W x H) - 15-5/8" x 20" x 1-3/8" (398.15 x 508 x 34.93 cm)
Weight - 6.7 lbs (3.04 kg)
Mount - Hinge lock
In the Box:
12" Econo Mate Table
Mounting hardware
Instruction manual
*Sold as an Individual
|
107.99 |
|
|
Econo Mate Bait/Filet Table - 12"
Magma’s versatile Econo Mate bait and fillet tables are constructed with commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood fillet tables.
Not just designed for bait preparation or fish cleaning, these tables are FDA approved for food preparation and service. The material will not crack, peel, mildew, absorb bacteria or fish odors. With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.
The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety. Completely assembled with nothing else to buy make this the perfect compact bait/fillet table for the Fisherman who is on a budget or limited for space.
Features:
Slotted back allows for drainage from work surface
All edges and corners rounded for safety
FDA approved for food service
UV stabilized
Will not crack, peel, mildew, or retain fish odors
Includes tool holders for easy access to fillet knives and pliers
Technical Specifications:
Material - 100% High Density Color Core Polyethylene
Table Dimensions (L x W x H) - 16" x 12-3/8" x 1-7/8" (508 x 398.2 x 34.9 cm)
Weight - 4.5 lbs (2.04 kg)
Mount - Hinge lock
In the Box:
12" Econo Mate Table
Mounting hardware
Instruction manual
*Sold as an Individual
|
95.99 |
|