|
3-Rod Hanger w/Poly Rack
Polished Stainless/White
Rod-tip spring design securely locks rods in position. Easy to install UV-stabilized polyethylene racks. Pre drilled recessed mounting holes and beveled edges for clean, attractive look.
|
200.47 |
|
|
2-Rod Hanger w/Poly Rack
Polished Stainless/White
Rod-tip spring design securely locks rods in position. Easy to install UV-stabilized polyethylene racks. Pre drilled recessed mounting holes and beveled edges for clean, attractive look.
|
128.51 |
|
|
4-Rod Hanger w/Poly Rack
Polished Stainless/White
Rod-tip spring design securely locks rods in position. Easy to install UV-stabilized polyethylene racks. Pre drilled recessed mounting holes and beveled edges for clean, attractive look.
|
252.35 |
|
|
Gen3 Warm White, RGBW Full Color 3.5” IP65 Recessed Light with Polished Stainless Steel Bezel - 12VDC
Indoor / Outdoor Recessed 3.5” LED Light 2700K, 85 CRI Dimmable COB & RGB Color LED
The newest generation Lunasea LED RGBWW recessed light. The same great warm white high output light of our LLB-46 line with the addition of full color mixing. The Red, Green and Blue LED’s are high power not the typical low power found in other products. Color mixing requires RGBW controller. IP65 for Indoor or Outdoor use.
Use with our dimmers: LLB-45WW-91-00, LLB-45WB-91-00, LLB-45WZ-91-00, LLB-45WG-01-00, LLB-45WR-91-00.
Features:
High Output Warm White & Full Color
480 Lumen, 2700K Warm White equal to 40W
IP65 Indoor/Outdoor
|
74.41 |
|
|
Polished Stainless Steel Table Pedestal 3" OD x 25-1/2" L
All of TACO's Z76-Series table pedestal columns are tapered on the bottom for a secure fit into the base while also allowing for easy removal and storage.
Features:
Available in satin anodized aluminum rib design or polished stainless steel
Available in three different lengths
Custom heights available based upon minimum order quantities
5-year limited warranty
Specifications:
Finish: Polished
Taper: Single
Material: Stainless Steel
Length: 25-1/2"
|
93.25 |
|
|
Polished Stainless Steel 2-19/64’’ Rub Rail End Cap
Caps rub rail to finish end of rail and ensure that inserts stay intact.
Features:
Caps rub rail to finish end of rail
Ensures inserts stay intact
Offers a finished look
Stainless Steel Marine Grade 316
Polished
5-Year limited warranty
|
68.28 |
|
|
Command Ratchet Hinges - 18-1/2" - 316 Stainless Steel - Pair
Because of the success of the popular 9-3/8" long Command Ratchet Hinge, TACO developed the 18-1/2" long counterpart for longer applications. This heavy-duty, extended specialty hinge has one locking position at 105 degrees and is perfect for sun pads, bolsters, and lounge backrests.
Features:
Polished stainless-steel Type-304
Mounts above the deck
One locking position at 105-degrees
Can be used for seat backs up to 22" long
Single or double-seat capacity
Meets ABYC H-31 standards class B* application, 500 ft-lb. of torque load for pair
500-hour salt fog test
For cushions up to 4" thick
5-year limited warranty
*Sold as a pair
|
518.86 |
|
|
Flush Pull Latch Pull to Open - Non-Locking - Polished Stainless Steel
Features:
Material: 316 Stainless Steel
Finish: Electropolished
Access Restriction: No Restriction
Grip Range: 25.000-26.000 mm (0.98-1.02 in)
Panel Thickness: 12.000-17.000 mm (0.47-0.67 in)
Profile: Low Profile
Size Series: Medium Size
Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.
|
50.40 |
|
|
12x12 Polished Stainless Steel Trim Tab Kit
Improve fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions.
Uflex trim tabs have been specifically designed for easy installation using a quick connect bracket actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.
|
1136.96 |
|
|
Polished Stainless Steel Vault Drain Plug
The VAULT series drain plug is engineered to screw right into the existing 1/2 NPT brass or stainless transom garboard.
Features:
High-polished 316 Stainless Steel
Triangular ergonomic cap so there are no tools required to tighten or loosen the plug
NPT backup O-ring for a water-tight fit
The matching garboard utilizes a gasket in place of messy silicone
Approved for all marine environments including saltwater
Fits all 1/2 NPT brass and stainless transom garboards
*Sold as an Individual
|
33.60 |
|
|
Polished Stainless Steel Vault Center Drain Plug
The revolutionary Vault center drain plug is specifically designed to replace the shorter and far more expensive T-handle center drain plug.
Features:
High-polished 316 Stainless Steel
Triangular ergonomic cap so there are no tools required to tighten or loosen the plug
8” total length for better reach
Fits all 1/2 NPT brass and stainless transom garboards
NPT thread and a backup O-ring for a water-tight fit
*Sold as an Individual
|
60.48 |
|
|
Polished Stainless Steel Cable Seal - 1 Cable (2-10mm)
The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.
Features:
No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation
Watertight installation - Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7
Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges
Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others
Note:
*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.
|
38.40 |
|
|
Polished Stainless Steel Cable Seal - Multi Cables (up to 2-17mm Each)
The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.
Features:
No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation
Watertight installation - Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7
Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges
Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others
Note:
*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.
|
74.88 |
|
|
Polished Stainless Steel Cable Seal - 2 Cables (2-15mm Each)
The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.
Features:
No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation
Watertight installation - Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7
Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges
Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others
Note:
*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.
|
42.24 |
|
|
Polished Stainless Steel Vault Pro - Drain Plug & Garboard Assembly
The stainless steel VAULT series drain plug with gasket and S.S. garboard.
Features:
Triangular ergonomic cap so there are no tools required to tighten or loosen the plug
NPT backup O-ring for a water-tight fit
Approved for all marine environments including saltwater
Fits all 1/2 NPT brass and stainless transom garboards
*Sold as an Individual
|
51.84 |
|