NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

MEGA Live Hand Control with Universal Mount Every detail, in any direction, now for every boat. The Universal Hand Control for MEGA Live provides hand control steering of the MEGA Live transducer. This brings this technology to virtually any boat, thanks to an adjustable GeigerTec mount, made from billet aluminum. And since Universal Hand Control for MEGA Live is mounted independent of your trolling motor's steering, you'll have an uninterrupted picture of what's below, even while fishing in wind, waves, or using Spot-Lock™. Features: Compatible Humminbird control heads: All APEX™ models, All SOLIX® models, and HELIX® 8-12 G3N & HELIX 7-15 G4N models (Must be MEGA Side Imaging or MEGA Down Imaging model). MEGA Live Imaging allows fish and structure to be seen in real time, with no gaps in sonar coverage, powered by the unmatched detail and clarity of MEGA Imaging® throughout the entire sonar view. Choose from multiple viewing modes: Forward Mode for partial coverage below the boat and out away from the boat, Down Mode for a full view below, and Landscape Mode for a wide, top-down view looking out and around the boat. Mark and view waypoints on the MEGA Live Imaging sonar screen to remember productive fishing spots for next time. Transducer shaft length: 50 inches. The mounting Plate can be direct mounted or mounted in a Cannon Aluminum Mounting Track. Mounting Bracket Material: CNC-machined billet aluminum. What's Included: MEGA Live Imaging Transducer, Adjustable Mounting Arm, Shaft and Handle, Ethernet Cable, Power Cable, and Mounting Hardware. Specifications: Live Sonar Coverage: 20 degrees x 120 degrees Independent Mount 2-Year Limited Warranty

RAM® Track Ball™ Transducer Mount with 18" Aluminum Rod Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. Included with the mount is the Track Ball™ base for connecting to any kayak track system including the RAM Tough-Track™. This unique design provides a universal solution for virtually any kayak as well as any transducer. The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.  Assembly Hardware: (1) Friction Washer (1) 1/4"-20 x 7/8" T-Bolt (1) 1/4"-20 x 1.5" Machine Screw (1) 1/4"-20 Nylock Nut Specifications: Ball/Socket Size: B Size 1" Weight Capacity: 2 lbs Materials: Marine-grade aluminum, high strength composite

Deck Mount Plate This adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a protective mounting boot lets you avoid sharp edges. Includes mounting hardware

5" Extruded Aluminum Tough-Track™ With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-5U features 5” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets. Material: Marine-grade aluminum and high-strength composite Note: Part number reflects product packaged in clear bag polybag. Weight: 0.21 lbs.

17" Extruded Aluminum Tough-Track™ With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-17U features 17” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets. Material: Marine-grade aluminum and high-strength composite Note: Part number reflects product packaged in clear polybag. Weight: 0.42 lbs.

13" Extruded Aluminum Tough-Track™ With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-13U features 13” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets. Material: Marine-grade aluminum and high-strength composite Note: Part number reflects product packaged in clear polybag. Weight: 0.36 lbs.

3" Extruded Aluminum Tough-Track™ With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-3U features 3” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets. Material: Marine-grade aluminum and high-strength composite Note: Part number reflects product packaged in clear polybag. Weight: 0.17 lbs.

9" Extruded Aluminum Tough-Track™ With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-9 features 9” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets. Material: Marine-grade aluminum and high-strength composite Note: Part number reflects product packaged in clear polybag. Weight: 0.28 lbs.

Clamp Mount Lets you mount your Cannon Sport-Troll, Easi-Troll or Mini-Mag downrigger on the gunwale or transom of your boat. Aluminum mount has a comfortable hand knob with heavy-duty coarse-thread screw that opens 2". This adds portability to your downriggers. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Center Loader for Top-Loading Aluminum Tough-Track™ The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading point to insert track bases. Hardware not included. Material: High-strength composite Note: Part number reflects product packaged in clear polybag.