Sidewinder Backing Plate f/Bolt-In Holders Below top operation. Fully locked in Running and 80° out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just pull down the Ridged Collar and lower or raise the pole. Available with Quick Laydown or Curved Tube. No ball bearings to rust. Internal Delrin and nylon bearing surfaces provide smooth operation and prevent metal to metal contact. Accepts our 16Ft Extra Strong (AP3916XS) or 18Ft (AP3918) Outrigger Pole. Has 4"x6" Mounting plate. Extends 14" above and 8-1/2" below mounting plate. Fits all outrigger ready boats.

Gunnel Mount Backing Plates f/88502 Outrigger Holder - Pair Made of heavy gauge stainless steel. Sized for cast outrigger holders only.

Side Mount Backing Plates f/88505 Outrigger Holder - Pair Made of heavy gauge stainless steel. Sized for cast outrigger holders only.

Large Gunnel Mount Backing Plates f/88506 Outrigger Holder - Pair Made of heavy gauge stainless steel. Sized for cast outrigger holders only.

Large Side Mount Backing Plates f/88508 Outrigger Holder - Pair Made of heavy gauge stainless steel. Sized for cast outrigger holders only.

16' Telescoping Carbon Fiber Outrigger Poles Sleeved for TACO Bases Carbon fiber poles are strong, stiff, and perfect for trolling a variety of baits.  Up to 26 feet in length, each pole weighs less than 3-1/2 pounds. The Surface finish is 3K sanded with High Gloss Clear Coat.  These poles are sold in pairs and designed to fit Lee’s Sidewinders and other major brand outrigger holders. Sold in Pairs. The perfect solution for trolling a variety of baits.  Features: Light Weight – Makes deployment, retrieval, raising, and lowering a breeze Strength – Spreaders become unnecessary A glossy clear coat finish is standard Technical Specifications: Length - 16' Number of Sections - Four (4) Mounting Base - Lee's Sidewinder 1-5/8" Rigging – Double rigging  Maximum Line Strength – 400 lb. monofilament *Sold as a Pair

RH5930 Stainless Steel Backing Plate for 0°, 15° & 30° Heavy Rod Holders.

RH5931 Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders.

26' Telescoping Carbon Fiber Outrigger Poles for 2" Stainless Steel Tubing Lee's carbon fiber poles are strong, stiff, and perfect for trolling a variety of baits.  These poles are 26 feet in length, and each pole weighs less than 3-1/2 pounds.  Features: The Surface finish is 3K sanded with High Gloss Clear Coat   These poles are sold in pairs and designed to fit Lee’s Sidewinders and other major brand outrigger holders *Sold as a pair (2)

PVC Drain Cap f/Heavy Rod Holders 1/4" NPT PVC Drain Cap for Heavy Rod Holders - 1/4" NPT for hose barb

441 Backing Plate f/241 & 244 Mount Use the Scotty Backing Plate to add structural support when attaching the Scotty 241L / 241 Combination Side / Deck Mount or the Scotty 244L / 244 Flush Deck Mount to thin-walled watercraft. Made with super tough, rugged engineering grade nylon. *Stainless steel nuts & machine screws included. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

DA Backing Plate - 5" Meguiar's DA backing plates are designed to distribute pressure evenly for smoother sanding and finishing. The outer edges are precisely tuned for disc contouring over flat and curved surfaces. These backing plates also features a rotation indicator marking that allows the user to recognize backing plate rotation for ideal results. Can be attached to all DA polishers with a 5/16" diameter shaft. Features: Distributes pressure for smoother sanding and finishing Precisely tuned outer edges for ideal pad & disc contouring over fl at and curved surfaces Quick and easy pad & disc changes with micro hook and loop attachment system Fits all DA Polishers with 5/16" diameter shaft

Backing Plate for 70 Series Rod Holders Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders, or perhaps even tear through, causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and one for 80 series rod holders. Each size fits all 3 models of the series. Features: Use this backing plate for all 70 series rod holders (53670A, 53670CA, 53671A, 53671CA, 53672A, and 53672CA) 316L cast stainless steel 4" x 5-1/4" 4mm thick Use your 1/4" stainless bolts and nuts (hardware not included)

Backing Plate for 80 Series Rod Holders Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 series rod holders. Each size fits all 3 models of the Series. Features: Use this backing plate on all 80 series rod holders (53680CA, 53680SA, 53681CA, 53681SA, 53682CA, and 53682SA) 316L cast stainless steel 4-1/4" x 6" 4mm thick Use your 1/4" stainless bolts and nuts (hardware not included)

24' Telescoping Carbon Fiber Outrigger Poles for Sidewinder Mount Advanced Carbon Composite Telescoping outriggers.  Lee's carbon fiber poles are by far stronger and lighter than any other aluminum pole on the market today.  The perfect solution for trolling a variety of baits.  Features: 24' Telescoping Carbon Fiber Outrigger Poles for Sidewinder Mount Advanced Carbon Composite Telescoping outriggers.  Lee's carbon fiber poles are strong and perfect for trolling a variety of baits.  Features: Light Weight – Makes deployment, retrieval, raising, and lowering a breeze Strength – Spreaders become unnecessary A glossy clear coat finish is standard Technical Specifications: Length - 24' Number of Sections - Five (5) Mounting Base - Lee's Sidewinder 1-5/8" Rigging – Double rigging  Maximum Line Strength – 400 lb. monofilament *Sold as a Pair