|
340L Nylon Track Adapter
Features:
Enables you to use all Scotty Rod Holders with 3 1/2″ wide track systems
Made with glass-filled nylon
Fits Bert’s, Trax Tech, etc...
Includes stainless steel fasteners
|
24.01 |
|
|
Gear-Head Track Adapter
The Scotty 438 Gear-Head Track Adapter quickly slides into place and locks down your post mounted Scotty rod holders and accessories. Similar to the revolutionary Scotty 428 Gear-Head, this system allows you to quickly change rod holder positions with a simple "twist". You can use your favorite, fully adjustable Scotty rod holder and adjust it to any vertical or horizontal position without having to drill permanent mounting holes. Designed to fit all kayak track systems, this compact product is a must for serious kayak anglers.
*Track NOT Included
|
14.98 |
|
|
Gear-Head Track Adapter - 25 Pack
The Scotty 438 Gear-Head Track Adapter quickly slides into place and locks down your post mounted Scotty rod holders and accessories. Similar to the revolutionary Scotty 428 Gear-Head, this system allows you to quickly change rod holder positions with a simple "twist". You can use your favorite, fully adjustable Scotty rod holder and adjust it to any vertical or horizontal position without having to drill permanent mounting holes. Designed to fit all kayak track systems, this compact product is a must for serious kayak anglers.
*Track NOT Included
|
352.48 |
|
|
141 Kayak/SUP Transducer Mounting Arm w/438 Gear-Head
Kayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty the 141 Track Adapter Mount that will allow you to install one of the Scotty Fishfinder mounts.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
28.67 |
|
|
E-Track Adapter Strap - 7" Pair
Bolt-on CargoBuckle adapters offer added flexibility and mobility for the
CargoBuckle Retractable Ratchet Tie-Down where permanent mounting is not desired.
|
20.53 |
|
|
Hunting & Fishing Supplies
|
|
|
0440-BK-1 Low Profile Track - 1"
The No. 440-BK-1 Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime
The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty Rod Holders and Accessories
Easily install Low Profile Track on your kayak, canoe, or any other watercraft
Slide the Scotty No. 438 Gear-Head Track Adapter into the track, click in your favourite Scotty Rod Holder or Accessory and start fishing
(Gear-Head Adapter, Rod Holder and Accessories not included)
Track Dimensions: 1 3/4” wide x 3/8” tall x (1” usable track)
|
5.28 |
|
|
170 2.25" Ball Mounting System for 10-12" Screens
Components:
171 2.25" Ball System Arm
175 2.25" Ball System Top Plate for 10-12" Screens
176 2.25" Ball System Base
171 2.25" Ball System Arm
Features:
Engineering-grade nylon and Stainless steel construction
Compatible with all 2.25″ Scotty ball system accessories
The multi-hole top plate fits most popular electronics brands
UV-resistant engineering-grade nylon construction
Corrosion-resistant stainless steel hardware
2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends
For 10-12″ fish finders
Holds your device securely in extreme conditions
Easy grip T-knob for loosening or tightening
Designed for 1/4” fasteners (sold separately)
175 2.25" Ball System Top Plate for 10-12" Screens
Features:
Engineering-grade nylon and Stainless steel construction
Compatible with all 2.25″ Scotty ball system accessories
The multi-hole top plate fits most popular electronics brands
UV-resistant engineering-grade nylon construction
Corrosion-resistant stainless steel hardware
2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends
For 10-12″ fish finders
Holds your device securely in extreme conditions
Easy grip T-knob for loosening or tightening
Designed for 1/4” fasteners (sold separately)
176 2.25" Ball System Base
Features:
Engineering-grade nylon and stainless steel construction
Compatible with all 2.25″ Scotty ball system accessories
Equipped with the classic Scotty 241 hole pattern, allowing it to be paired with these options:
449 Portable Clamp Mount
320 Adaptable Rail Mount
242 Rail Mount Adapter
340 Track Adapter
441 Backing Plate
341 Glue-On Mount Pad28 Gimbal Mount
|
73.38 |
|
|
Low Profile Track - Black - 4"
Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing.
Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)
|
8.35 |
|
|
Low Profile Track - Black - 8"
Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing.
Dimensions: 1-3/4" wide x 3/8" tall x 10-3/4" long (8" usable track)
|
11.28 |
|
|
RAM Adapt-A-Post Quick Release Track Base (Track Dimensional Range: .250" - .562")
For the serious kayak angler, the RAM Quick Release Track Base is a universal mounting solution for a wide variety of RAM kayak products. The RAM Adapt-A-Post Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the ball counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water.
Compatible Tracks:
YakAttack GearTrac
Wilderness Systems SlideTrax
Most Common T-Tracks
Scotty Slide Track
Many More!
Track Dimensional Range:
.250" MIN. - .562" MAX.
Features:
Quick release and installation
Easily relocate adapter along track, can be installed at any point on the track
High strength materials ensure product longevity
Compatible will all RAM Post and Spline Rod Holders
Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag
|
20.53 |
|
|
Baitcaster Rod HolderTrack Combo w/Gearhead & 4" Track
Includes:
280 Baitcaster / Spinning Rod Holder
438 Gear-Head
440-4 Low Profile Track
The Baitcaster / Spinning Rod holder is a versatile rod holder for any angler. The baitcaster reel sits in a cushioned cradle while a front slot allows for a spinning reel. The open bottom allows for the rod holder to accommodate trigger grips as well. Rods can be secured with a soft latching strap which snaps over the top for baitcaster or under the bottom for spinning reels. The 438 Gear-Head Track Adapter quickly slides into place and locks down Scotty rod holders and accessories, this allows you to quickly change rod holder positions with a simple twist. The Scotty 440-4 Low Profile Track is made from high strength composite material. The track can be quickly and easily installed on a kayak, canoe or any other watercraft.
Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
27.88 |
|
|
Kayak Fishing Starter Pack
Fishing essentials for outfitting your Kayak. The Kayak Starter Pack includes a 282 Baitcaster Spinning Rod Holder with Gear Head & Track-Holds a bait caster reel securely in the cushioned cradle. 438 Gear Head Track Adapter-slide the Gear Head into any of our 440 series track, twist the gear head clockwise to securely lock. 440-4 4” Low Profile Track-top load design allows for quick and easy setup. 311 Drink Holder-fits cans, coffee mugs and insulated sleeves. 136 Paddle Clip-holds your paddle, net, gaff & boat hook. 455 Baitboard & Accessory Tray-Exterior tray walls lets you cut bait and prep lures. Also included are your Stainless steel fasteners-18 pieces #10 x 5/8.
*Not intended for use with inflatable kayaks.
Includes the following Scotty part numbers:
440-4, 455, 438, 311, 282 and 136
|
87.36 |
|
|
158 1" Ball with Low Profile Track Mount
Adapt your Scotty low profile track to our 1″ ball mounting system. For use with all Scotty 1″ ball mounts and Scotty low profile tracks.
Features:
1″ Ball with Track Adapter
|
13.39 |
|
|
168 1-1/2" Ball with Low Profile Track Mount
Adapt your Scotty low profile track to our 1.5″ ball mounting system. For use with all Scotty 1.5″ ball mounts and Scotty low profile tracks.
Features:
1.5" Ball with Track Adapter
|
16.30 |
|