Sure-Grip Flush Mount Mounting Base - Fits 2" Flat Surfaces This Attwood Sure-Grip Flush Mount can fit 2" flat surfaces and is constructed out of extruded aluminum.  Specifications: Base: Flush base Fits: 2” flat surfaces

Sure-Grip Clamp-On Rail Base - Fits Up To 7/8" Diameter This Attwood Sure-Grip Flush Mount can fit a round rail up to 7/8” and is constructed out of extruded aluminum.  Specifications: Base: Clamp-on rail base Fits: Round rail up to 7/8 in. diameter

ROKK Mini Self-Adhesive Surface Mount 3M self-adhesive base mount that fits any flat surface.  Features: No drilling required to install Works on any flat surface *Sold as an Individual

Sure-Grip Flat Rail Base - Fits Square Rail This Attwood Sure-Grip Flush Mount can fit square rails and is constructed out of extruded aluminum.  Specifications: Base: Flat rail base Fits: Square rail

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 5-degrees Stem Length: 4 inches with wing nut Use for: Horizontal rod position Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 8" & 5-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 5-degrees Stem Length: 8 inches with wing nut Use for: Horizontal rod position with added clearance Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 4" & 25-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 25-degrees Stem Length: 4 inches with wing nut Use for: Drifting or trolling Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 4" & 45-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 45-degrees Stem Length: 4 inches with wing nut Use for: Trolling Includes: 5071 mounting base

RAM Universal Finger Grip Glare Shield Clamp Mount Part #: RAM-B-177UN4 The RAM-B-177-UN4 consists of a glare shield clamp base, double socket arm and universal Finger Grip™ holder. Simply locate the clamp on any clamping surface up to 1.12" thick and gently snug the nylon thumb screws. The double ball & socket system will provide perfect viewing angles to get the most from your electronic device. The RAM glare shield clamp with double ball & socket system is far and away the most discrete and clean way to mount most any compact electronic device to the glare shield of your aircraft. The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns. This mount is designed to hold the following devices: Cell Phones (check measurements below for dimensions) 2-Way Radios GPS Devices Works with OtterBox (Defender, Commuter, Impact) Cases, Phones with Bumper, Twisted Metal Case and More Perfect rugged solution for the Blackberry, HTC Evo, Droid X, iPhone, and More Use on your Motorcycle, ATV, UTV, Car, Boat and More Mount will attach to flat surfaces with the following dimensions: Min: 4.4mm / 0.17" Max: 28.0mm / 1.12" Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large Tablets The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® III clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III. X-Grip® III Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" X-Grip® III Cradle Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite

Swivel Base Flush Mount Rod Holder Part #: RH-5365SS Medium 30 Stainless Steel Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.

Swivel Base Flush Mount Rod Holder Part #: RH-5367SS Medium 0 Degree Stainless Steel Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.

RV-FS402W Shallow Mount 200W Speaker System - White The Fusion Sound-Panel, a revolutionary speaker system made for outdoor enthusiasts and the diverse needs of different vehicles. The Sound-Panel solves the age-old problem of delivering professional sound quality from the limitations of shallow mounting depths often required in many installations. Features: The Sound-Panel boasts two silk dome tweeters, two custom 4" speaker drivers and a bass radiator, all perfectly tuned to the Sound-Panel enclosure  Delivers 200 Watts of powerful and high quality audio to your RV The Sound-Panel is rated IP65 for protection in the harsh outdoor environment from the front and rear of the enclosure  Perfect for installation on the outside or inside of a RV Optional mounting spacer accessories are available to suit the variable mounting depths of every RV. There are four mounting options available: FLUSH – With only a 41mm required depth the RV-FS402W will fit flush in most locations. 19MM WALL DEPTHS – With new technology available in construction the RV-FS402W can be semi mounted into the cavity by using the 22mm spacer. 25MM WALL DEPTHS – By using the 16mm spacer the RV-FS402W will semi mount into the normal caravan construction panels. SURFACE MOUNT – Installs directly onto any flat surface with no cut out required. QUICK AND SIMPLE INSTALLATION – The RV-FS402W is designed for easy installation, saving time and money. The Sound-Panel incorporates a pair of speakers, tweeters and passive radiator. Both the left and right speaker wires from the source unit or amplifier only need to be routed to one location for connection. Only a single cut out is required. STAINLESS HARDWARE – Stainless steel mounting hardware is included with the RV-FS402W. This limits corrosion and tea staining and keeps the RV-FS402W looking great season after season. The RV-FS402W is an all inclusive solution. The sealed design protects all drivers and components from being damaged if mounted in cupboards or cavities or outside exposed to the elements. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RV-FS402B Shallow Mount 200W Speaker System - Black The Fusion Sound-Panel, a revolutionary speaker system made for outdoor enthusiasts and the diverse needs of different vehicles. The Sound-Panel solves the age-old problem of delivering professional sound quality from the limitations of shallow mounting depths often required in many installations. Features: The Sound-Panel boasts two silk dome tweeters, two custom 4" speaker drivers and a bass radiator, all perfectly tuned to the Sound-Panel enclosure  Delivers 200 Watts of powerful and high quality audio to your RV The Sound-Panel is rated IP65 for protection in the harsh outdoor environment from the front and rear of the enclosure  Perfect for installation on the outside or inside of a RV Optional mounting spacer accessories are available to suit the variable mounting depths of every RV. There are four mounting options available: FLUSH – With only a 41mm required depth the RV-FS402W will fit flush in most locations.19MM WALL DEPTHS – With new technology available in construction the RV-FS402W can be semi mounted into the cavity by using the 22mm spacer. 25MM WALL DEPTHS – By using the 16mm spacer the RV-FS402W will semi mount into the normal caravan construction panels. SURFACE MOUNT – Installs directly onto any flat surface with no cut out required. QUICK AND SIMPLE INSTALLATION – The RV-FS402W is designed for easy installation, saving time and money. The Sound-Panel incorporates a pair of speakers, tweeters and passive radiator. Both the left and right speaker wires from the source unit or amplifier only need to be routed to one location for connection. Only a single cut out is required. STAINLESS HARDWARE – Stainless steel mounting hardware is included with the RV-FS402W. This limits corrosion and tea staining and keeps the RV-FS402W looking great season after season. The RV-FS402W is an all inclusive solution. The sealed design protects all drivers and components from being damaged if mounted in cupboards or cavities or outside exposed to the elements. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM-ROD Combination Bulkhead/Flat Surface Base with Plunger for Spline Posts The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Compatible with RAM post and spline rod holders and RAM wedge mount ball adapters. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.