|
Flotec FPPM3600D Thermoplastic Pedestal Sump Pump 1/3 HP
The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps.
FEATURES
Replaces any existing brand of 1/3 HP pedestal pump
Long lasting thermoplastic construction
Quick, easy installation
Fits in a 12" diameter basin and offers a 1-1/4" discharge
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3000 GPH
FLOW AT 10' LIFT: 2460 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 10-1/2"
SWITCH OFF LEVEL: 2-1/2"
MINIMUM SUMP DIAMETER: 12"
MINIMUM SUMP DEPTH: 12"
DISCHARGE PIPE SIZE: 1-1/4" FNPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE:
CORD LENGTH: 6'
AMP DRAW: 3.5 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amps
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
|
178.62 |
|
|
Flotec FPZS33V Submersible Thermoplastic Sump Pump 1/3 HP
Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins.
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
Switch Type: Vertical - Operates in 10" basins or larger
Horse Power: 1/3 HP
GPH: 3,600
Max Lift: 22'
Solids Handling: 3/16"
Discharge: 1.5" NPT
Power Cord: 8', Grounded
|
262.86 |
|
|
Flotec FPZS33T Submersible Thermoplastic Sump Pump 1/3 HP
Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
1 Year Limited Warranty
Switch Type: Tethered - Operates in 14" basins or larger
Horse Power: 1/3 HP
GPH: 3,600
Max Lift: 22'
Solids Handling: 3/16"
Discharge: 1.5" NPT
Power Cord: 8', Grounded
|
255.84 |
|
|
Flotec FP4212 Cast Iron Convertible Jet Pump 1/2 HP
KEY FEATURES
Superior performance at depths to water of 100' or less
Rugged, heavy-duty pump housing
Ready-to-install dual-voltage 115v/230v motor - see manual for 230 volt conversion
Pressure switch pre-wired with 30-50 PSI pressure setting
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 7.9 GPM (shallow setup)
FLOW at 10' LIFT and 40 PSI: 7.1 GPM (shallow setup)
MAX LIFT: 25' for shallow setup / 70' for deep setup
MAXIMUM PRESSURE: 60 psi (shallow setup) / 54 psi (deep setup)
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DRIVE PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1"NPT
AMP DRAW (full load): 9.9 Amps on 115V / 4.95 Amps on 230V
VOLTAGE: 115v/230v, 60 Hz (factory preset to 115v)
RECOMMENDED BREAKER: 15 amp
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
509.25 |
|
|
Flotec FPZS50T Submersible Thermoplastic Sump Pump
Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
Switch Type: Tethered - Operates in 14" basins or larger
Horse Power: 1/2 HP
GPH: 4,200
Max Lift: 22'
Solids Handling: 3/16"
Discharge: 1/5" NPT
Power Cord: 8', Grounded
|
286.26 |
|
|
Flotec FPZS50V Submersible Thermoplastic Sump Pump 1/2 HP
Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins.
FEATURES
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
1 Year Limited Warranty
Switch Type: Vertical - Operates in 10" basins or larger
Horse Power: 1/2 HP
GPH: 4,200
Max Lift: 22'
Solids Handling: 3/16"
Discharge: 1.5" NPT
Power Cord: 8', Grounded
|
296.40 |
|
|
Flotec FPZS25T Submersible Thermoplastic Sump Pump 1/4 HP
Flotec's 1/4 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
Switch Type: Tethered - Operates in 14" basins or larger
Horse Power: 1/4 HP
GPH: 3,200
Max Lift: 20'
Solids Handling: 3/16"
Discharge: 1.5" NPT
Power Cord: 8', Grounded
|
219.96 |
|
|
HYPRO 9203C CAST IRON PEDESTAL MOUNT PUMP
The Hypro Cast Iron Pedestal Mount (9203C) pump model has a direct drive and a maximum free flow of 140 GPM. It has a maximum pressure of 180 P.S.I. as well as a maximum speed of 6,000 RPM.
Max. flow: 140 gpm/530 lpm (free flow)
Max. pressure: 180 psi/12.4 bar (Shut off)
Max. speed: 6000 rpm
Max. fluid temperature: 140°C
Pedestal mount, direct drive
Housing available: cast iron and stainless steel
Port sizes: 1 ¼" NPT inlet, 1" NPT outlet
Shaft: 5/8" solid
Pump shaft rotation: CCW (9202S-R is CW)
Impeller: glass-filled nylon (cast iron standard); glass filled polypropylene (stainless standard)
Pump seals: Viton/ceramic standard (Life Guard silicon carbide, Buna-N ceramic and Viton/silicon carbide available)
Life Guard silicon carbide standard in stainless steel pumps
|
573.73 |
|
|
Flotec FP4222 Cast Iron Convertible Jet Pump 3/4 HP
Cast iron convertible jet pumps can be used in shallow or deep well applications in " diameter wells or larger and are pre-set for 30-50 PSI operation.
KEY FEATURES
Superior performance at depths to water of 100' or less
Rugged, heavy-duty pump housing
Ready-to-install 230 volt motor - see manual for 115 volt conversion
Pressure switch pre-wired with 30-50 PSI pressure setting
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 3/4
MAXIMUM CAPACITY: 11.9 GPM (shallow setup)
FLOW at 10' LIFT and 40 PSI: 10.8 GPM (shallow setup)
MAX LIFT: 25' w/ shallow setup / 100' w/ deep well setup
MAXIMUM PRESSURE: 60 psi w/ shallow setup / 54 psi w/ deep setup
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 6.1 amps on 230v / 12.2 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp for 230v / 20 amp for 115v
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
68.64 |
|
|
Flotec FP0S1250X Water Removal Utility Pump 1/6 HP, 1200 GPH
Good, dependable performance marks the Flotec FPOS1250X as the solution for many home dewatering applications.
KEY FEATURES
Plastic construction
Pumps to 3/16" depth
Switch for automatic operation sold separately
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/6 HP
MAXIMUM CAPACITY: 1200 GPH
FLOW at 10' LIFT: 840 GPH
DISCHARGE SIZE: 1" NPT (Female)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' w/ 3-prong grounded plug
MAXIMUM WATER TEMPERATUE: 77°F (25°C)
|
157.56 |
|
|
Flotec FP4312 Thermoplastic Convertible Jet Pump 1/2 HP
Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service.
KEY FEATURES
Superior performance at depths to water of 100' or less
Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
Ready-to-install dual voltage motor preset to 115v - see manual for 230 volt conversion
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 9 GPM (shallow well setup)
FLOW AT 10' LIFT and 40 PSI: 7.8 GPM (shallow well setup)
MAX LIFT: 25' w/ shallow well jet kit / 70' w/ deep well jet kit
MAX PSI: 62 psi (shallow well setup)
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4"
MINIMUM SUCTION PIPE SIZE: 1-1/4"
DRIVE PIPE SIZE: 1"
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 9.9 Amps on 115V / 4.95 Amps on 230V
VOLTAGE: 115v/230v, 60 Hz (factory preset to 115v)
RECOMMENDED BREAKER: 15 amp
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
516.00 |
|
|
Flotec FPSE2800A Thermoplastic Effluent Pump
The FPSE2800A provides the answer to many effluent/dewatering situations where 3/4" solids handling is all that is needed.
Automatic submersible effluent/dewatering pump
Capable of handling 3/4" solids - ideal for basement installations, laundry facilities, underground parking, grain storage and construction sites
Thermoplastic construction
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3600 GPH
FLOW AT 10' LIFT: 2700 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 11-1/2"
SWITCH OFF LEVEL: 4-1/2"
DISCHARGE PIPE SIZE: 2"
MINIMUM PIPE SIZE: 1-1/2"
MAXIMUM SOLID HANDLING SIZE: 3/4"
CORD LENGTH: 15'
AMP DRAW: 7 amps
VOLTAGE: 115v, 60 Hz
|
436.80 |
|
|
Flotec FP0020 Float Switch
Flotec Replacement Float Switch Only for Pedestal Sump Pumps, Internally Mounted in the Motor
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
46.31 |
|
|
Flotec Stainless Steel Waterfall Utility 1/2 HP
Stainless Steel construction with a ceramic seal design marks the FPOS4100X as the top of the line in the Flotec Waterfall/utility series of pumps.
KEY FEATURES
Complete stainless steel construction - superior corrosion resistance
Seal design - allows for continuous operation
High performance - ideal for waterfalls and streams
WARRANTY
2 year limited warranty
BODY CONSTRUCTION: Stainless Steel
HORSEPOWER: 1/2
MAXIMUM LIFT: 30'
MAXIMUM CAPACITY: 4100 GPH
FLOW at 10' LIFT: 3000 GPM
SWITCH TYPE: No Switch (Manual Operation)
DISCHARGE PIPE SIZE: 1-1/4" (ships with Adapter Fittings)
AMP DRAW (full load): 7.2 Amps
CORD LENGTH: 15'
VOLTAGE: 115v AC, 60 Hz
MAXIMUM WATER TEMPERATURE: 100°F (38°C)
|
681.75 |
|
|
Tuthill 2C2EN-C-7 Pump 9Gpm W/Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM
C Series Pump
Cast Iron Construction
NO motor
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
830.28 |
|