|
SHURflo 8008-943-839 Diaphragm Pump Spectra 125 PSI Replacement Pump
This SHURflo diaphragm pump 8008-943-839 is the replacement pump for the Spectra 125 PSI Reverse Osmosis Booster Pump. Heat Sink 34-007 is recommended when using this pump with your RO system.
Spectra Low Pressure RO Replacement Pump.
|
334.46 |
|
|
SHURflo 34-007, Heat Sink
SHURflo Heat Sink, Attaches to Standard Motors For Extra Cooling, 5 Inches Long
This heat sink is recommended when using SHURflo 8008-943-839 Diaphragm Pump when used for a RO system.
|
34.87 |
|
|
SHURflo 8005-952-480 Diaphragm Pump
Reverse Osmosis Booster Pump
SHURflo Diaphragm Pump 3 Chamber, 21.8 GPH Open Flow, 24/36VDC Continuous Duty, 80 to 100 PSI Bypass (no switch), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports
SHURflo 8000 Series RO Pumps are the most widely used pumps for RO. They are ideal for high pressure / low flow applications with low amp draw. They can be mounted in any position, are compact, and are designed for long trouble-free life.
|
287.24 |
|
|
Shurflo 2088-554-144 Pump 12V
Reverse Osmosis Booster Pump
RO Diaphragm Pump with 12 Volt DC Motor and Automatic Switch.
Polypropylene Pump Body, EPDM Valves, Santoprene Diaphragm.
Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread.
Pump Body: Polypropylene Impeller:EPDM Shaft:Santoprene
Port Size: Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread.
Motor Specs: 12 Volt DC, Permanent Magnet, P/N 11-148-04, Thermally Protected. Wire: 12.5 Inch x 16AWG wires with Switch.
GPM/PSI: 3.5 GPM 45 PSI
|
323.30 |
|
|
Shurflo 8095-902-260 Diaphragm Pump 230V
Shurflo 8095-902-260, Diaphragm Pump with 230 Volt AC Motor and 100 PSI Bypass. Nylon Pump Body, EPDM Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.5 GPM open flow.
|
221.35 |
|
|
SHURflo SLV-10-AA41, Diaphragm Pump 1.0 GPM 12VDC
SHURflo Diaphragm Pump, 1.0 GPM Open Flow, 12VDC Intermittant Duty, Automatic 45 PSI Switch (on at 25 PSI, off at 40 PSI), Viton Valves, Santoprene Diaphragm, 3/8" Hose Barb Ports, for Low Volume Spraying and Transfer
|
65.68 |
|
|
Shurflo 2088-514-145 Diaphragm Pump 3.6 GPM 12VDC
Shurflo Diaphragm Pump Premium with Cooling Fins, 3.6 GPM Open Flow, 12VDC Continuous Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, N.S.F. Listed.
Runs directly on 12 Volt DC
45 PSI pressure switch build-in
Built-in check valve, prevents back flow of fluid through the pumps
Self Priming up to 2.7 vertical lift meters (9′)
Chemical resistant materials
Can run dry without damage
1 year warranty
Positive Displacement 3 Chamber Diaphragm Pump
Pressure Switch: Splash-Proof, Adjustable from 30 to 50 PSI.. Factory Set at 45 PSI Shut-Off, Turn On 25 PSI
Bypass: 45 + 60 PSI Springs
Check Valve: (1-Way Operation) Prevents Reverse Flow
Liquid Temperature: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max.
Prime: Self-Priming Up To 9.0 Ft. Vertical
Weight: 6.8 Lbs (3.1 Kg)
Duty Cycle: Continuous
|
267.37 |
|
|
SHURflo 8000-151-296, Diaphragm Pump 3 Chamber 1.04 GPM 24VDC
The 8000 Series diaphragm pump is SHURFLO®'s most widely used industrial pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
SHURflo Diaphragm Pump 3 Chamber, 1.04 GPM Open Flow, 24VDC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), 80 PSI Bypass, Buna Valves, Geolast Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports
Typical Application: Soil Extraction, Carpet Cleaning
|
198.65 |
|
|
Shurflo 8005-733-155, Diaphragm Pump 3 Chamber 1.56 GPM 115VAC
The 8000 Series diaphragm pump is SHURflo's most widely used pump with spherically shaped valves and automatic demand switch, these pumps are the pump of choice for applications requiring consistent, dependable operation and priming. Up to 1.8 GPM (6.8 l/min).
Shurflo Diaphragm Pump 3 Chamber, 1.56 GPM Open Flow, 115VAC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), 45 PSI Bypass, EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 1/2"-14 Male Parallel Thread Ports, UL/CSA Recognized, NSF Listed.
Typical Application: Water Delivery
|
189.28 |
|
|
SHURflo 8000-542-296, Diaphragm Pump 3 Chamber 1.32 GPM 12VDC
The 8000 Series diaphragm pump is SHURflo's most widely used pump with spherically shaped valves and automatic demand switch, these pumps are the pump of choice for applications requiring consistent, dependable operation and priming.
SHURflo Diaphragm Pump 3 Chamber, 1.32 GPM Open Flow, 12VDC Continuous Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), 60 PSI Bypass, Viton Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8"-18 NPT Female Thread Ports.
Typical Application: Agricultural Spraying
|
175.92 |
|
|
Shurflo 2088-594-154, Diaphragm Pump 3.3 GPM 115VAC
Shurflo Diaphragm Pump Standard, 3.3 GPM Open Flow, 115VAC Intermittant Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, N.S.F. Listed
MODEL NUMBER: 2088-594-154
PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump
CHECK VALVE: (1-Way Operation) Prevents Reverse Flow
CAM: 3.0 Degree MOTOR: Permanent Magnet, P/N 11-150-10,
Thermally Protected VOLTAGE: 115 VAC Nominal
PRESSURE SWITCH: Adjustable from 30 to 50 PSI. Factory Set @ 45 PSI Shut-Off, Turn On 25 5 PSI
LIQUID TEMPERATURE: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max.
PRIME: Self-Priming Up To 9.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar)
PORTS: 1/2" - 14 Male Parallel Thread
MATERIAL OF CONSTRUCTION: PLASTICS- Polypropylene VALVES- Santoprene DIAPHRAGM- Santoprene FASTENERS- Zinc Plated Steel
NET WEIGHT: 5.1 Lbs (2.31 Kg)
DUTY CYCLE: Intermittent (See Temp. Rise Chart) TYPICAL APPLICATIONS:
Water Delivery APPROVALS: NSF Listed, UL/CSA Recognized Component
|
217.06 |
|
|
SHURflo 8000-033-236, Diaphragm Pump 3 Chamber 1.0 GPM 115VAC
The 8000 Series diaphragm pump is SHURFLO®'s most widely used industrial pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
SHURflo Diaphragm Pump 3 Chamber, 1.0 GPM Open Flow, 115VAC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), Viton Valves, Viton Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, UL/CSA Recognized,
Typical Application: Agricultural Spraying
|
268.00 |
|
|
SHURflo 8000-154-290 Diaphragm Pump
The 8000 Series diaphragm pump is Shurflo®'s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance.
Pressures up to 150 PSI [10.3 BAR]
Self-Priming up to 8 Vertical Feet [2.4M]
Chemically Resistant Materials
Designed for Spraying and Fluid Transfer
Can Run Dry without Damage
Built-In Check Valve
Supported for agriculture
SHURflo Diaphragm Pump 3 Chamber, 2.0 GPM Open Flow, 24VDC, 45 PSI Bypass, 4.5 AMPS, Buna Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports
|
190.88 |
|
|
SHURflo 8000-443-236, Diaphragm Pump 3 Chamber 1.75 GPM 12VDC
The 8000 Series diaphragm pump is SHURflo's most widely used pump with spherically shaped valves and automatic demand switch, these pumps are the pump of choice for applications requiring consistent, dependable operation and priming.
SHURflo Diaphragm Pump 3 Chamber, 1.75 GPM Open Flow, 12VDC Continuous Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports.
Typical Application: Water Delivery
|
147.69 |
|
|
SHURflo 8000-543-238 Diaphragm Pump 3 Chamber 1.8 GPM 12VDC
The 8000 Series diaphragm pump is SHURflo's most widely used pump with spherically shaped valves and automatic demand switch, these pumps are the pump of choice for applications requiring consistent, dependable operation and priming.
SHURflo Diaphragm Pump 3 Chamber, 1.8 GPM Open Flow, 12VDC Intermittant Duty, 100 PSI Demand Switch (adjustable 80-100 PSI), Viton Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports.
Typical Application: Agricultural Spraying
|
165.13 |
|