|
SHURflo 80-120-00
The 115 volt Shurflo 80-120-00 Home RO water system Pump.
This RO booster systems is ideal for household use. Equipped with a high quality, continuous duty pump that provides a constant flow of feed water to the membrane, yet maintains quiet operation.
Up to 50 GPD
115VAC Input
Safe Low Voltage Motor
Continuous Duty
80 PSI Bypass
1/4" Quick Connect Fittings
Includes Full Tank Shutoff Switch
|
578.51 |
|
|
SHURflo 80-120-01, Reverse Osmosis Booster System 220VAC
The Shurflo 80-120-01 Pump is used for home RO water systems. It is a enclosed reverse osmosis booster low voltage motor.
220 Volts AC Input
80 PSI bypass valve
Up to 50 GPD
Continuous Duty
0.25" quick connect fitting
|
578.51 |
|
|
Shurflo 8000-991-236, Diaphragm Pump 3 Chamber 0.56 GPM 24VDC
Shurflo Diaphragm Pump 3 Chamber, 0.56 GPM Open Flow, 24VDC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports.
Typical Application: Reverse Osmosis Booster Pump
|
222.44 |
|
|
SHURflo 8010-252-136, Diaphragm Pump 3 Chamber 0.95 GPM 24VAC
SHURflo Diaphragm Pump 3 Chamber, .95 GPM Open Flow, 24VAC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, NSF Listed,
Typical Application: Reverse Osmosis Booster Pump, Water Delivery
|
263.59 |
|
|
Shurflo 8010-252-256 Pump 24V 45Byp 60Psi
Shurflo- Diaphragm Pump 3 Chamber, .95 GPM Open Flow, 24VAC (not DC) Intermittent Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), 45 PSI Bypass, EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, NSF Listed, Typical Application: Reverse Osmosis Booster Pump, Water Delivery
|
273.56 |
|
|
Shurflo 94-120-00 Impeller Kit
|
34.70 |
|
|
Shurflo 902-200 DC Controller For 9300
The 902-200 has all the features of the Shurflo's 902-100 pump controller and more. It optimizes your solar water pumping system by translating the current and voltage from your PV panels into a combination that is better matched to the pump's needs. This allows your SHURflo 9300-series pump to start pumping earlier in the morning and run later into the evening.
SHURflo 902-200 Pump Controller Features
Increases daily water output by up to 30%
Protects pump from low or high voltage conditions
Switch-selectable for 12 VDC or 24 VDC operation
Pump on/off switch
Water-tight enclosure and cable inlets
Terminals for float switch
Includes water level monitor mode with probes and cable
|
617.56 |
|
|
SHURflo 8005-952-480 Diaphragm Pump
Reverse Osmosis Booster Pump
SHURflo Diaphragm Pump 3 Chamber, 21.8 GPH Open Flow, 24/36VDC Continuous Duty, 80 to 100 PSI Bypass (no switch), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports
SHURflo 8000 Series RO Pumps are the most widely used pumps for RO. They are ideal for high pressure / low flow applications with low amp draw. They can be mounted in any position, are compact, and are designed for long trouble-free life.
|
287.24 |
|
|
SHURflo 94-161-11100, Diaphragm Pump 115VAC Input
SHURflo Diaphragm Pump, 115VAC Input, 36V Pump, 75 GPD, Reverse Osmosis
|
558.49 |
|
|
SHURflo 94-162-11100, Diaphragm Pump 115VAC Input
SHURflo Diaphragm Pump, 115VAC Input, 36V Pump, 75 GPD, Reverse Osmosis
|
558.49 |
|
|
SHURflo 8008-943-839 Diaphragm Pump Spectra 125 PSI Replacement Pump
This SHURflo diaphragm pump 8008-943-839 is the replacement pump for the Spectra 125 PSI Reverse Osmosis Booster Pump. Heat Sink 34-007 is recommended when using this pump with your RO system.
Spectra Low Pressure RO Replacement Pump.
|
334.46 |
|
|
Shurflo 2088-554-144 Pump 12V
Reverse Osmosis Booster Pump
RO Diaphragm Pump with 12 Volt DC Motor and Automatic Switch.
Polypropylene Pump Body, EPDM Valves, Santoprene Diaphragm.
Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread.
Pump Body: Polypropylene Impeller:EPDM Shaft:Santoprene
Port Size: Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread.
Motor Specs: 12 Volt DC, Permanent Magnet, P/N 11-148-04, Thermally Protected. Wire: 12.5 Inch x 16AWG wires with Switch.
GPM/PSI: 3.5 GPM 45 PSI
|
323.30 |
|
|
Shurflo 2088-594-154, Diaphragm Pump 3.3 GPM 115VAC
Shurflo Diaphragm Pump Standard, 3.3 GPM Open Flow, 115VAC Intermittant Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, N.S.F. Listed
MODEL NUMBER: 2088-594-154
PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump
CHECK VALVE: (1-Way Operation) Prevents Reverse Flow
CAM: 3.0 Degree MOTOR: Permanent Magnet, P/N 11-150-10,
Thermally Protected VOLTAGE: 115 VAC Nominal
PRESSURE SWITCH: Adjustable from 30 to 50 PSI. Factory Set @ 45 PSI Shut-Off, Turn On 25 5 PSI
LIQUID TEMPERATURE: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max.
PRIME: Self-Priming Up To 9.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar)
PORTS: 1/2" - 14 Male Parallel Thread
MATERIAL OF CONSTRUCTION: PLASTICS- Polypropylene VALVES- Santoprene DIAPHRAGM- Santoprene FASTENERS- Zinc Plated Steel
NET WEIGHT: 5.1 Lbs (2.31 Kg)
DUTY CYCLE: Intermittent (See Temp. Rise Chart) TYPICAL APPLICATIONS:
Water Delivery APPROVALS: NSF Listed, UL/CSA Recognized Component
|
217.06 |
|
|
SHURflo 8000-033-236, Diaphragm Pump 3 Chamber 1.0 GPM 115VAC
The 8000 Series diaphragm pump is SHURFLO®'s most widely used industrial pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
SHURflo Diaphragm Pump 3 Chamber, 1.0 GPM Open Flow, 115VAC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), Viton Valves, Viton Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, UL/CSA Recognized,
Typical Application: Agricultural Spraying
|
268.00 |
|
|
SHURflo 166-200-36, Air Diaphragm Pump 0.6 GPM
SHURflo Air Diaphragm Pump, 0.6 GPM (2.3 l/min), Continuous Duty, Viton Valves and Diaphragm, Polypropylene Body, 20-60psi, 3/8” Hose Barb Fittings
Item Diaphragm Pump
Type Air-Driven Injection
Inlet/Outlet (In.)3/8 HB
Body Material Polypropylene Diaphragm
Material Viton(R)
Check Valve Viton(R)
Max. Temp. (F)120
Length (In.) 5.80 Width (In.)3.80 Height (In.)7.00
GPM Max .0.6 Max.
Pressure (PSI) 60
Self-Priming 25" Hg
|
231.49 |
|