|
Sta-Rite U79-11 Dura-Glas Wrench Lid
Replacement for Dyna-Pro Pool and Spa Inground Pumps
This dura-glas wrench lid is designed to use with Sta-Rite Dyna-Pro pool and spa in ground pumps.
Dura-glas wrench lid replacement
Fits Sta-Rite Dyna-Pro pool and spa in ground pumps
|
31.78 |
|
|
Sta-Rite U111-186P Union Assembly
Union assembly replacement
Fits Pentair Sta-Rite LT-Series pool and spa pump models LTAYDRL, LT1/6L, LTACL, LTADL
|
12.22 |
|
|
Sta-Rite PNC-10 Shallow Well Jet Pump 1/2HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 7GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
797.04 |
|
|
Sta-Rite PND-10 Shallow Well Jet Pump 3/4HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
863.28 |
|
|
Sta-Rite PWP-01 Shallow Well Jet Pump 3/4HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, No Pressure Switch, up to 25 Foot Water Depth
|
732.24 |
|
|
Sta-Rite SNC-L Shallow Well Jet Pump 1/2HP
1/2 HP - 115/230 Volt - Shallow Well Jet Pump
The ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25 feet deep. Self-priming after the priming chamber has been filled with water.
APPLICATIONS
Water systems and sprinkling
FEATURES
Quality Construction
Close grained cast iron body. Drain port provided for easy winterizing.
Built-in Jet
High strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service.
Noryl Impeller
Precision-molded for perfect balance ultra-smooth for highest performance and efficiency.
Precision Molded Diffuser
Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser.
Mechanical Shaft Seal
Precision lapped and highly polished carbonceramic, stainless steel construction. Internal design guarantees continuous water lubrication.
Motor Windings
Superior insulation materials protect against excessive moisture and contaminants assure prolonged motor life.
Balanced Rotor
Die cast under high pressures for uniform performance and greater efficiency, dynamically balanced.
Heavy-duty Ball Bearings
Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
Pump and Motor Shaft
Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment.
Dustproof Cover
All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components.
Pressure Switch
Professional quality, allows cut-in adjustments.
SPECIFICATIONS
Max. Liquid Temperature: 140°F
Max. Inlet Pressure: 50 PSI
|
869.76 |
|
|
Sta-Rite PP1657 Overhaul Kit
Sta-Rite Overhaul Kit for the MS Pump includes the following items, Shaft Key, Shaft Seal, Spring Holder, Gaskets, Impellers, Wear Rings
Sta-Rite, Flotec, and Simer parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
272.09 |
|
|
STA-RITE C1-270P DIFFUSER 1 1/2HP POOL PUMP
|
35.91 |
|
|
STA-RITE J20-11 GASKET
Gasket for use with Series MS Models MSC7, MSD7, MSE7, MSF7, MSG7
With hoursepowers of 1/2, 3/4, 1, 1-1/2, 2 HP
|
6.25 |
|
|
SHURflo 11-111-00, 12V MOTOR FOR 8000 SERIES PUMPS
|
207.78 |
|
|
Yamada DP-10BAN 3/8" Aluminum Pump
DP-10BAN AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® DP-10BAN series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 6 gallons per minute (DP-10) or 8 gallons per minute (DP-15). DP-10 pumps are available in aluminum, stainless steel (316), and polypropylene, DP-15 pumps are available in either polypropylene or groundable acetal. A wide selection of diaphragm materials cover a variety of applications.
Inlet (in): 3/8
Outlet (in): 3/8
Max Flow (gpm): 6.0
Max Temp: 180
Max Solid (in): 1/32
Valve Type (in): 1/4
Air Motor Material: Aluminum
Body Material: Aluminum
Elastomer Material: Buna N
|
705.00 |
|
|
General Industrial Pumps
CLR Marine is driven to provide a large selection of general industrial pumps and a wide range of high-volume applications to best suit your business needs. Our pump selection includes pump manufacturers such as AMT, Burks, Cat Pumps, Primetime, Flojet, Flotec, Fill-Rite, Finish Thompson, Groco, Goulds, Iwaki, Jabsco, and many, many more.
The vast range of pump types you will find are magnetic drive pumps, piston pumps, diaphragm pumps, gear pumps, centrifugal pumps, and much more. Whether you require a product to remove suspended solids or to transport liquids, we have the right tools you will need. CLR Marine can be your pump supplier providing you with the right products from centrifugal pump manufacturers like Oberdorfer and Sta-Rite as well as submersible pumps from Simer and Little Giant. We are passionate about providing you the right products you need.
|
|
|
Get 10% OFF an N76-46P Pump Body Today!
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps. For use in Ponds, Fountains and watering the grass.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
For use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN.
N76-46P, Pump Body, for use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN
Get Your Coupon Code Today!
|
|
|
No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.
SHOP JOHNSON PUMP
The Aqua Jet five chamber diaphragm pump provides the perfect water pressure or deck wash solution for both small and medium sized leisure and commercial boats as well as mobile homes, campers and summer homes.
Quiet and pulsation-free even at low speeds. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium-such as in shower and galley applications. Integrated pressure switch turns pump on and off automatically when tap is opened and closed. Operates in fresh or sea water.
SHOP THE Aqua Jet five chamber diaphragm pump
Specials Closeouts Remanufactured Rebates
|
|
|
Easy, Quick & Hassle Free
The portable oil change bucket features the reliable, heavy-duty F3B-19 flexible impeller pump with an integrated flow reversing switch. The F3B-19 Oil Change Bucket from Johnson Pump provides your service shop with a dependable and long-lasting oil change solution.
Features:
5.5 gallons per minute
Flexible Impeller Pump Assembly
Easy, quick, no-mess, no-hassle, oil change package
Replaceable impeller - nonfixed
Automatic shut off
Complete, ready to use
Portable and convenient
High-temperature resistant dipstick tube
Heavy-duty extended 8' alligator clips easily clamp directly onto the battery
Sealed lid with easy-to-use pour spout for emptying used oil
Better Quality, Better Performance
The preferred OEM replacement for Sherwood 1500k impeller.
Made with the patented MC 97 rubber compound this impeller is designed
to provide maximum engine performance and adheres to strict tolerance
manufacturing with exact OEM dimensions.
• Proven longer impeller life
• Less material failure and swelling
• Best engine cooling impeller
• Stable pressure
• Exact dimensions
• Used by leading manufacturers
Specials Closeouts Remanufactured Rebates
|
|