JABSCO 30180-0003 Pump 1 1/2" Ports 23 GPM 115VAC Body: Bronze Impeller: Nitrile Shaft: 316 Stainless Steel Impeller Sleeve Over Motor Shaft Shaft Seal: Lip Type Motor: 1/3 HP Capacitor type 115v with 8" cord Built In Dry Running Capability (up to 30 minutes) After Initial Priming   MARINE: Bait Tank Circulation; Washdown, Utility Dockside Pump.   INDUSTRIAL: Industrial Filling Systems; Utility Shop Pump; Transfer Gum Arabic, Transfer Distilled Water; Recharge Water Softeners; Hydro-static Pressure Testing; Sump Pumping.   FOOD, BEVERAGE & DAIRY: Circulate Cooling Water; Defrost Refrigeration Coils; Fill Drums; Wash Down Equipment and Floors; Utility Pump.   HOME: Fill and Empty Tubs, Pools; Empty Basements and Cesspools; Water Systems; Water Lawns and Gardens; Remove Water from Low Areas; Recharge Water Softeners.   PLUMBING: Empty Clogged Drains, Empty Sumps, Sinks and Tubs; Pump Out Water Closets. FARM:  Fill Tractor Tires, Water Tanks; Pump out Silo Pits (liquid manure); Flush and Clean Animal Pens.    <  CONTRACTORS: Remove Water from Excavations; Supply Water to Mortar Boxes; Cement Mixing; Washdown Equipment.  

Jabsco 12290-0001-7273 115V Rubber Impeller Pump 115V RUBBER IMPELLER PUMP Model JA 12290-0001-7273   Features Pump Body: Phenolic Plastic Impeller: Neoprene  Port Size: Ports are 5/8 Inch OD for Hose Connections Motor Specs : 1/6 Horsepower, 1750 RPM RPM, 115 Volts, Open Drip Proof Handles hard and soft solids without clogging.   Non pulsating flow    

Goulds J5 1/2Hp Convertible Jet Pump Goulds Jet Pump Convertible Cast Iron J+ Series, 1 1/4” x 1”FNPT Ports, 1/2HP 115V, Carbon/Ceramic/Buna Seal   Convertible jet pumps require either a shallow well adapter or a deep well jet assembly for proper operation. A pressure control valve is required for deep well applications.

Scot 48451X-1.5HP Motor and Pump 48451X Impeller: 4.75" Ports: 1.5 X 1.5 NPT 1.5 HP TEFC 2850/3450 RPM   1/50/60HZ

Jabsco 12210-0003 Pump 115V Motor Pump Body: Bronze Port Size: 3/8" NPT Internal Pipe Thread and Adaptors for 3/4" garden hose thread Flow: 3.4 GPM at 10ft Pressure: 17.4 PSI Max Impeller: Neoprene or Nitrile Shaft Seal: Lip Type Motor: 115 Volt AC Intermittent duty with Replaceable Brushes, Stainless Steel Shaft, 6' cord, three prong grounding plug   APPLICATIONS The 12210-Series Pumps are the most compact self-priming flexible impeller 115 Volt AC Utility Pumps Jabsco offers.   INDUSTRIAL: Transferring liquids. Velocity-mixing. Pumping coolants. Pumping waste water to sewer. Cellar, yard and sump drainage. Cooling Heliarc welding equipment.   MARINE: Washing down decks and docks. Water for ship's service supply. Pumping out crank-case oil.   FARMING: Pumping water for stock, poultry houses, farmhouse. Pumping water from wells and cisterns. Pumping liquid ballast into tractor tires. Pumping water from flooded basements.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, etc. Draining water heaters and water closets. Draining laundry tubs below sewer level. Removing water trapped between walls, draining inaccessible places when pipes break or leak. Draining fishing ponds and garden pools. Removing sludge, lye water and other caustics from stopped up drains and sinks.   Jabsco Flexible Impeller Utility Pump 115V 3.4GPM Nitrile Impeller  

Jabsco 11870-0045 Electric Pump 1 1/4 12V Clutch FEATURES Pump Body: Bronze Port Size: 11870-Series, 1-1/4" NPT Internal Electric: 12V Self-priming from 7.8 feet dry Pulley: Single B groove or Double A groove Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings    APPLICATIONS  This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump   INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.   Jabsco Electric Clutch Pump 12V, 1-1/4" NPT Ports, Single "B" Groove Pulley  

Jabsco 18739-0000 115V Mtr For Ja 11810-0003  

Micropump GA-V23.C8FS.C Pump Head C Mount Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution Max Flow Rate (mL/min): 672 Flow Rate (mL/rev): 0.084 Min Flow Rate (mL/min): 12.6 Differential Pressure (PSI): 40 Differential Pressure (bar): 2.8 Max Motor RPM (rpm): 8000 Seal Material: PTFE Body Material: 316 SS Gear Material: Carbon graphite Relief Valve: No Run Dry: Under 30 seconds Duty Cycle Continuous: Yes Particulates: No Max Temperature ( F): 350 Min Temperature ( F): -50 Max Temperature ( C): 177 Min Temperature ( C): -46 Max Viscosity (cP): 100 Model Number: GA-V23.C8FS.C Part Number: 82117

March 815 PL Beer Pump 115V March Pump’s 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (8PSI).   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Materials are FDA Food Compliant: Components are UL Recognized Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C Note: Product image may be different than actual product received.   The 815-PL Beer Pump has pumped Hot Water and Hot Wort.   March Pump’s 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The 815-PL Beer Pump motor has a six foot cord, a plug, and a base.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.   

Jabsco Pump 12V 1B Clutch   FEATURES Pump Body: Bronze Port Size: 11860-Series, 1" NPT Internal 11870-Series, 1-1/4" NPT Internal Electric: 12V, 24V or 32V Pulley: Single B groove or Double A groove Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings     APPLICATIONS / CHARACTERISTICS This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.   MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.     INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.     Jabsco- Electric Clutch Pump 12V, 1" NPT Ports, 1 Groove "B" Belt Pulley  

Jabsco 115V Transfer Pump   FEATURES Pump Body: Bronze Port Size: 1/2" NPT Internal and 1" Hose Barb External. Adaptor for 3/4" Garden Hose. Flow: Up to 5.8 GPM Pressure: Up to 17.3 PSI Impeller: Neoprene, Nitrile or Viton Shaft Seal: Lip Type Motor: 1/6hp - 115 Vac, 60 Hz. ODP Motor 1/4hp - 115 Vac, 60 Hz. TENV Motor 1725 RPM, Thermal Overload Protection, Stainless Steel Shaft, 8 foot Cord wilh 3 Prong Grounded Plug.     APPLICATIONS / CHARACTERISTICS INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment.     FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.   MARINE: Washdowns, utility dock side pump.   PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling.       Jabsco Bronze Utility Transfer Pump 1/4HP 115V TENV Nitrile Impeller  

Jabsco Water Puppy Ac Hd Pump FEATURES Pump Body: Bronze Port Size: 1/2" NPT Female. Includes Two 3/4" Male Garden Hose Adapters. Flow: 6.0 GPM at 10 feet of head Pressure: to 17.3 PSI Impeller: Neoprene, Nitrile or Viton Shaft Seal: Lip Type Shaft: Stainless Steel Motor: 1/6hp - 115 Vac, 60 Hz. ODP Motor 1/4hp - 115 Vac, 60 Hz. TENV Motor Thermal Overload Protector Stainless Steel Shaft 8' Cord with 3 Prong Grounded Plug     APPLICATIONS / CHARACTERISTICS INDUSTRIAL: Circulating and transferring, velocitymixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment     FARMING: Pumping water for stock, pumping water from shallow wells and cisterns   MARINE: Washdowns, utility dock side pump   PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools   PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling     Jabsco Flexible Impeller Utility Pump 115V ODP Motor 6GPM Nitrile Impeller  

Proven 360-115V, Utility Pump Self Priming Proven Pump Utility Pump is a Self Priming Rubber Impeller pump. With male Garden Hose Thread and 3/8”FNPT, It runs on 115V and pumps 360GPH.  This pump is NOT USCG Approved

Jabsco 18770-0003 Engine Cooling Pump Jabsco Engine Cooling Pump for Cummins 3866609, KTA19 125 gallons per minute Bronze construction Brand: Jabsco Model: 18770-0003 Item Weight: 79.2 pounds Manufacturer Part Number: 18770-0003 125 GPM Engine Cooling Pump

Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 1 1/4" FEATURES Pump Body: Bronze pedestal Port Size: 1-1/4" (32mm) NPT Internal Horizontal ports on 6400-Series Vertical ports on 7420-Series Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: 316 Stainless Steel Standard shafts extend 2 5/16" from pump Short shafts extend 1 5/16" from pump for use on Caterpillar Engines Bearings: Pre-lubricated Double Row Ball     APPLICATIONS / CHARACTERISTICS MARINE: Pumping bilges, Washdown, Engine Cooling.     INDUSTRIAL: Circulating and Transferring liquids; Velocity-mixing; Transferring soap, liquors, pastes, glues, glycerine, lotions and brine.   FARM: Pumping water for stock and poultry houses and Booster Pumping.   PLUMBING & HOME: Pumping out flooded basements, cesspools, sumps and many other uses.    Jabsco Flexible Impeller Pedestal Pump 1 1/4"NPT Full Cam Neoprene Impeller