|
Iwaki MX-70VT-15L, 1 inch MPT in/outlet 1450gph 120v
Iwaki MX-70VT-15L Water Pump
Japanese pressure rated water pump.
1 inch MPT inlet and outlet.
1/4 HP Motor output.
3300 RPM motor speed.
Max flow 35.6 GPM.
1450 GPH at 6 feet of head.
Max head 36.1 ft.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
700.00 |
|
|
IWAKI MD-15RT-115NL, POLY MAG DRIVE PUMP 1/2" THREAD
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/75 Horsepower, 115 Volts AC, 1 Phase Electric Motor. 1/2 Inch NPT Threaded Port Connections.
|
265.20 |
|
|
IWAKI MD-20R-115NL, Centrifugal Mag Drive Pump
(OLD #MD20-RL)
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/38 Horsepower, 115 Volts AC, 1 Phase, TENV Electric Motor. 5/8 Inch Hose Barb Port Connections.
|
303.68 |
|
|
IWAKI MD-40RT-115NL, CENTRIFUGAL PUMP POLY 115V 3/4" 13GPM
Centrifugal Pump and Motor.
GFRPP Polypropylene Construction.
Close coupled to a 1/12 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor.
Port Connections 3/4 Inch NPT Threaded.
|
481.00 |
|
|
IWAKI MD-70RL-115, MAG DRIVE PUMP POLY 1" 115V
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/4 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch Hose Barb Port Connections.
|
618.00 |
|
|
IWAKI MD-70RT-220, PUMP POLY 220V THREADED
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/4 Horsepower, 220 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch NPT Threaded Port Connections.
|
618.00 |
|
|
BURKS 35CT5M, Turbine Pump 1/2HP 3PH 230/460v
Turbine Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1978.20 |
|
|
BURKS 35CT7M, Turbine Pump 230/460v 1PH 1/2HP
Turbine Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1978.20 |
|
|
BURKS 375G6-2", Centrifugal Pump 3PH 7.5HP 230/460v
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 7-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 2-1/2 Inches NPT Inlet, 2 Inches NPT Outlet.
Impeller Diameter is 6.06 Inches.
UNSPSC Code: 40150000
|
3777.75 |
|
|
BURKS 37GA5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.81 Inches.
UNSPSC Code: 40150000
|
1460.70 |
|
|
BURKS 3CR6M-V, Turbine Pump 1/3HP 1PH 230V Viton
Turbine Pump and Motor unit.
Bronze Fitted Cast Iron Construction w/ Viton seal & O-Ring.
Close Coupled to a 1/3 Horsepower, 3450 RPM, 230 Volts, 1 Phase Motor.
Ports are 1/2 Inches NPT Inlet, 1/2 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1762.20 |
|
|
Flojet 02100-115 Pump 12V 2.3/60 Pbb Sw
Pump and Motor unit, 12 Vdc
2.3 Gpm
60 Psi (max)
Pbb C/w Pressure Switch
|
228.10 |
|
|
Gianneschi CP26-A1-24V Brz 24V Self Prim Pump
CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 1500 RPM, 24 Volts DC. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications:
Ballast
Bilge
Diesel oil
F.W./S.W. Circulation
Fire-fighting
Grey water
S.W feeding
Port Size:
From 3/4'' to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1603.31 |
|
|
Iwaki MD-30RLT, 3/4 inch MPT in/outlet 480gph 120v
Iwaki MD 30RLT Water Pump
Japanese pressure rated flow water pump.
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
0.8 amps.
Max flow 10.0 GPM.
480 GPH at 6 feet of head.
Max head 17.7 ft.
Max system pressure 11.60 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
310.00 |
|
|
Iwaki MD-100RLT, 1 inch MPT in/outlet 1986gph 120v
Iwaki MD-100RLT Water Pump
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/3 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch NPT Threaded Port Connections.
Japanese pressure rated flow pump.
1 inch MPT inlet and outlet.
1/3 HP Motor output.
3300 RPM motor speed.
120 volts
3.4 amps.
Max flow 35.6 GPM.
1986 GPH at 6 feet of head.
Max head 39.0 ft.
Max system pressure 25.6 psi.
Twin bearing system handles thrust loads, extends service life
Hollow rotating / internal cooling circuit reduces bearing temperature.
Compact / Quiet energy for easy maintenance.
Few moving parts for easy maintenance
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
Iwaki America Inc. of Holliston, Massachusetts, is a joint venture which grew from a 15 year association between Walchem Corp. of Holliston, MA and Iwaki Co. Ltd. of Tokyo, Japan. Combining Walchems 30 years of chemical injection and control experience with Iwakis 50 years of pump design engineering, Iwaki America offers the best chemical handling equipment for use in Chemical Process, O.E.M., Industrial and Semiconductor applications.
|
748.00 |
|