|
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
|
Myers Pumps CMV5A-11 Sewage Pump 1/2Hp 115V
Myers CMV5A-11 is a 1/2-horsepower, 115-volt sewage pump that is designed for demanding residential installations. It is made with a combination of cast iron and thermoplastic for corrosion resistance. It also has a recessed vortex impeller that can handle solids up to 2 inches in diameter.
|
684.13 |
|
|
Simer 5020B Pedestal Sump Pump, 1/3HP
Simer Pedestal Sump Pump, Thermoplastic Construction, 1/3HP 115Volt, 1-1/4” Discharge Port, up to 3480GPH, Maximum Lift 20 Feet, 3 Prong Power Cord, Automatic Vertical Float Switch
|
178.62 |
|
|
Simer 5023SS Pedestal Sump Pump, 1/3HP
Simer Pedestal Sump Pump, Cast Iron and Stainless Construction, 1/3HP 115Volt, 1-1/2" NPT Discharge Port, up to 3480 GPH, Maximum Lift 20 Feet, 3 Prong Power Cord, Automatic Vertical Float Switch
|
319.02 |
|
|
Myers Pumps ME100S-23 Effluent Pump 1Hp
Myers Pumps ME100S-23 Solids Handling Effluent Pump
1 HP, 230 Volts
3 Phase
2" Discharge
3/4" Solids
|
2300.06 |
|
|
Oberdorfer 500-F13 Cent Pump 1/3Hp 115V Only
|
903.60 |
|
|
Myers Pumps CT25FAB Centrifugal Pump Field Assy Kit
Myers Centrifugal Pump End Only is Cast Iron, Field Assembly Kit, for 2-1/2HP Motor, 2" Suction x 1-1/2" Discharge Ports, 96GPM at 20' Head, 140' Head Max, Brass Impeller 6-1/16" Diameter
|
918.96 |
|
|
FINISH THOMPSON 107324-1 ODP MOTOR 1/3HP 115V
S1 FTI EF Series Motor, ODP (Open Drip Proof), Splash-proof, IP24 Motor
|
299.33 |
|
|
Myers Pumps MS33PV1 Sump Pump 1/3Hp 115V 8'Cd
Myers MS33PV10, MS Series, Sump Pump with Vertical Float Switch, 1/3 HP, 115 Volts, 1 Phase, 1-1/2 NPT Discharge, 52 GPM Max, 24 ft Max Head, Automatic, 10 ft Cord
Features
3/16" solid handling
Maintenance-free operation
Vertical float switch for sump pits with 10" diameter or larger
Dual ball-bearing motor and additional lip seal for durability and longer pump life
Durable PSC motor for years of service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Thermal overload protection with automatic reset
Zinc motor housing
Thermoplastic volute case
CSA listed
Lead Time: Average 7-10 Days, Factory Back Order.
|
293.22 |
|
|
Myers Pumps MDC33V20 Sump Pump 0.33HP 115V 20' Cord Automatic
Myers MDC Series Sump Pump Typical Applications
Basement Sumps
Dewatering
Water Transfer
Light Septic Tank Effluent
|
420.81 |
|
|
Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V
Myers ME40P-1 Cast Iron Effluent Pump Specifications
VOLTAGE: 1ø, 115V, 60 Hz
HORSEPOWER: 0.4 HP
AMP DRAW (full load): 12.0
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 1650
MAXIMUM HEAD: 32'
MAXIMUM CAPACITY: 80 GPM
SWITCH TYPE: Tethered Automatic
MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36"
DISCHARGE PIPE SIZE: 1-1/2" FNPT
MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids
IMPELLER TYPE: Cast Iron, Two-Vane Enclosed
CORD LENGTH: 10'
CORD SIZE: 16-3; Type: SJTW
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
|
673.56 |
|
|
Myers Pumps SRM4T 20 Sewage Pump 4/10Hp 115V 20'
The SRM4T 20 is made of cast iron and has an oil-filled motor for heat dissipation and continuous bearing lubrication. It is suitable for domestic wastewater septic pumping, large sumps, and residential septic tank sewage.
|
721.50 |
|
|
Jabsco Pump 1/4Hp Tefc 1Ph
FEATURES
Pump Body:
Bronze
Port Size:
1/2" NPT Internal and 1" Hose Barb External. Adaptor for 3/4" Garden Hose.
Flow:
Up to 5.8 GPM
Pressure:
Up to 17.3 PSI
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Motor:
1/6hp - 115 Vac, 60 Hz. ODP Motor
1/4hp - 115 Vac, 60 Hz. TENV Motor
1725 RPM, Thermal Overload Protection, Stainless Steel Shaft, 8 foot Cord wilh 3 Prong Grounded Plug.
APPLICATIONS / CHARACTERISTICS
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
MARINE: Washdowns, utility dock side pump.
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling.
Jabsco Bronze Utility Transfer Pump 1/4HP 115V TEFC Nitrile Impeller
|
741.96 |
|
|
Myers Pumps 18623D101W Case Ejecto Dw 1/3 & 1/2Hp
Pump Casing, Deep Well 1/3HP and 1/2HP, HJ
Use with Model HJ50D, Series HJ
|
348.53 |
|
|
Myers Pumps HJ75D Jet Pump & Motor Assembly
115v/230v Double Ball Bearing Motor w/ Voltage Selector Switch
SUCTION SIZE:1-1/4" NPT
DRIVE SIZE:1" NPT
DISCHARGE SIZE:1" NPT
VOLTAGE:230v / 115v AC, 60 Hz
|
1357.98 |
|