Flotec FP4105 Cast Iron Jet Pump 1/2 HP New cast iron shallow well jet pump is ideal for wells with pumping levels of 25' or less. Self-priming after the pump housing is initially filled with water. KEY FEATURES Reliable performance at 25' depth to water or less Maximum pressures of 63 PSI and maximum pumping capacities to 5.1 GPM Pump housing is constructed of heavy-duty cast iron and is ready to install 115 volt 1/2 HP Fan cooled, completely enclosed motor 1" Suction Port and 1" Discharge Port WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  5.6 GPM FLOW at 10' LIFT and 40 PSI:  4.5 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  63 PSI PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  7.2 amps VOLTAGE:  115v, 60 Hz RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP5512 Cast Iron Centrifugal Pump 1/2 HP Economical, general purpose centrifugal pumps can be used for water transfer, circulation, fountains, waterfalls, pressure boosting and sprinkling.   FEATURES Superior performance at depths to water of 25' or less Rugged, heavy-duty cast iron pump housing Ready-to-install 230 volt motor (dual voltage)   WARRANTY   1 year limited warranty     BODY CONSTRUCTION:  Cast Iron   HORSEPOWER:  1/2   MAXIMUM CAPACITY:  22 GPM   MAX LIFT:  25'   MAXIMUM DISCHARGE PRESSURE:  36 psi   MAXIMUM INLET PRESSURE:     MAXIMUM TOTAL PRESSURE:     SUCTION PIPE SIZE:  1-1/4" NPT   DISCHARGE PIPE SIZE:  1" NPT   AMP DRAW (full load):  4.7 amps on 230v / 9.4 amps on 115v   VOLTAGE:  230v / 115v , 60 Hz   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)   RECOMMENDED BREAKER:  15 amp on 230v / 15 amp on 115v

Flotec FP5532 Cast Iron Centrifugal Pump 1 HP Economical, general purpose centrifugal pumps can be used for water transfer, circulation, fountains, waterfalls, pressure boosting and sprinkling. FEATURES Superior performance at depths to water of 25' or less Rugged, heavy-duty cast iron pump housing Maximum pumping capacities to 68 GPM Ready-to-install 230 volt motor (dual voltage) 1 year limited warranty BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1 MAXIMUM CAPACITY:  47 GPM MAXIMUM LIFT:  25' MAXIMUM DISCHARGE PRESSURE:  49 psi MAXIMUM INLET PRESSURE:   MAXIMUM TOTAL PRESSURE:   SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  7.4 amps on 230v / 14.8 amps on 115v VOLTAGE:  230v / 115v , 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 20 amp for 115v LIQUID TEMP RANGE:  140 °F (60 °C)  

Flotec FP5230 Cast Iron Sprinkler Pump 1 HP Powerful 1 HP cast iron sprinkler pump moves up to 45 gpm. Perfect for sprinkler systems or water transfer applications. FEATURES Superior performance at depths-to-water of 25' or less Ideal for larger sprinkler systems and water transfer Rugged cast iron construction Voltage-selectable to run on 115v or 230v 1 year limited warranty BODY CONSTRUCTION: Cast Iron HORSEPOWER: 1 MAXIMUM CAPACITY: 45 GPM FLOW at 10' LIFT and 30 PSI: 35 GPM MAX LIFT:  25' MAXIMUM PRESSURE: 50 psi SUCTION PIPE SIZE: 1-1/4" NPT DISCHARGE PIPE SIZE: 1" NPT AMP DRAW (full load): 8.8 amps on 230v / 16.6 amps on 115v VOLTAGE: 230v / 115v , 60 Hz RECOMMENDED BREAKER: 15 amp on 230v / 25 amp on 115v MAXIMUM WATER TEMPERATEURE: 140 F (60 C)

Flotec FPSE3200A Thermoplastic Sewage Pump Durable, corrosion-resistant thermoplastic construction with 2" solids handling makes the FPSE3200A a great candidate for variety of wastewater applications.   Automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Durable, corrosion-resistant thermoplastic construction   BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 4/10 MAXIMUM CAPACITY: 5250 GPH FLOW AT 10' LIFT: 2550 GPH SWITCH TYPE: Tethered SWITCH ON LEVEL: 12-1/2" SWITCH OFF LEVEL: 5-1/2" DISCHARGE PIPE SIZE: 2" MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE: 2" CORD LENGTH: 8' AMP DRAW: 8.5 amps VOLTAGE: 115v, 60 Hz RECOMMENDED BREAKER: 15 amps

Flotec FPZS50T Submersible Thermoplastic Sump Pump Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1/5" NPT Power Cord:  8', Grounded

Flotec FPZS50V Submersible Thermoplastic Sump Pump 1/2 HP Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. FEATURES Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FP4012-10 Thermoplastic Shallow Well Jet Pump 1/2 HP This new revision provides good pressure pumping from wells where the depth-to-water is 25' or less. KEY FEATURES Perfect for shallow wells (depth-to-water less than 25') Thermoplastic construction for higher corrosion resistance 1-1/4" Suction / 1" Discharge Comes with pre-wired 30/50 pressure switch WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 MAXIMUM CAPACITY:  8 GPM FLOW at 10' LIFT and 40 PSI:  6.4 GPM MAX LIFT:  25' MAX PRESSURE:  77 psi PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  9.4 amps VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)

Flotec FP4312 Thermoplastic Convertible Jet Pump 1/2 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. KEY FEATURES Superior performance at depths to water of 100' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install dual voltage motor preset to 115v - see manual for 230 volt conversion WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9 GPM (shallow well setup) FLOW AT 10' LIFT and 40 PSI:  7.8 GPM (shallow well setup) MAX LIFT:  25' w/ shallow well jet kit / 70' w/ deep well jet kit MAX PSI:  62 psi (shallow well setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" MINIMUM SUCTION PIPE SIZE:  1-1/4" DRIVE PIPE SIZE:  1" DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP5172 Thermoplastic Sprinkler Pump 1.5 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads. KEY FEATURES Superior performance at depths to water of 20' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install 230 volt motor (dual voltage) Self-priming after pump housing is initially filled (Check Valve or Foot Valve required) 1 year limited warranty   BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1-1/2 MAXIMUM CAPACITY:  67 GPM FLOW at 10' LIFT and 30 PSI:  45 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  47 psi SUCTION PIPE SIZE:  1-1/2" NPT DISCHARGE PIPE SIZE:  1-1/2" NPT AMP DRAW (full load):  9.6 amps on 230v / 19.2 amps on 115v VOLTAGE:  230v / 115v , 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 25 amp for 115v MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)    

Flotec FPSE2800A Thermoplastic Effluent Pump The FPSE2800A provides the answer to many effluent/dewatering situations where 3/4" solids handling is all that is needed. Automatic submersible effluent/dewatering pump Capable of handling 3/4" solids - ideal for basement installations, laundry facilities, underground parking, grain storage and construction sites Thermoplastic construction BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/3 MAXIMUM CAPACITY:  3600 GPH FLOW AT 10' LIFT:  2700 GPH SWITCH TYPE:  Tethered SWITCH ON LEVEL:  11-1/2" SWITCH OFF LEVEL:  4-1/2" DISCHARGE PIPE SIZE:  2" MINIMUM PIPE SIZE:  1-1/2" MAXIMUM SOLID HANDLING SIZE:  3/4" CORD LENGTH:  15' AMP DRAW:  7 amps VOLTAGE:  115v, 60 Hz

Flotec FP0S1250X Water Removal Utility Pump 1/6 HP, 1200 GPH Good, dependable performance marks the Flotec FPOS1250X as the solution for many home dewatering applications.   KEY FEATURES Plastic construction Pumps to 3/16" depth Switch for automatic operation sold separately WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/6 HP MAXIMUM CAPACITY:  1200 GPH FLOW at 10' LIFT:  840 GPH DISCHARGE SIZE:  1" NPT (Female) VOLTAGE:  115v AC, 60 Hz CORD LENGTH:  8' w/ 3-prong grounded plug MAXIMUM WATER TEMPERATUE:  77°F (25°C)  

Flotec FPSC1725X-03 Cast Aluminum Water Removal Utility Pump 1/4 HP 1250 GPH Cast Aluminum construction provides years of service for those emergency water removal situations. FEATURES Heavy-duty, epoxy coated, cast aluminum construction Portable pump for emergency water removal or emptying shallow flooded areas Draws water down to 1/8" Switch for automatic operation sold separately 3-year limited warranty BODY CONSTRUCTION:  Cast Aluminum HORSEPOWER:  1/4 HP MAXIMUM CAPACITY:  1320 GPH FLOW AT 10' LIFT:  1020 GPH DISCHARGE SIZE:  1¼" (male) NPT VOLTAGE:  115v AC, 60 Hz CORD LENGTH:  8' with 3-prong grounded plug MAXIMUM WATER TEMPERATURE:  120°F (50°C)

OBERDORFER CB9000L CAST IRON GEAR PUMP 1" FEATURES: • Flows to 24.8 GPM • Max. RPM: 1725 • Max. PSI: 100 • Suction lift to 19.5 ft.* • Maximum viscosity to 100,000 SSU at reduced speed (max. input torque of 160 in.-lbs.) • Housing gasket: Vellomoid • Construction: Cast Iron housing, Steel gears, Steel shafts • Shaft Seals: Synthetic Braided compression packing with Teflon dispersion • Shaft Bearing Journals: Grease lubricated Cast Iron • Temperature range: -20 to 210° F • Maximum working pressure: 130 PSI • Pumps can operate bidirectionally (reversible) This Oberdorfer CB9000L is the drop in replacement for models C4K and C4V. It can also be considered as replacements for models 4KHK4 and 4KHJ7. This self-priming, positive displacement, external rotary gear pedestal pump is ideal for oil based fluids in a wide range of light-duty commercial, industrial, marine, and agricultural applications. It is for use with particulate free and non-abrasive high lubricating oil-based fluids compatible with iron and steel. Not to be used with water-based fluids. Line mounted pressure relief valves are recommended to protect downstream equipment. The pump should be mounted on a rigid base and properly aligned with the motor. Direct drive via flexible shaft coupling is the preferred method. When a belt drive is needed, additional support is necessary to absorb the added pulley load.

Flotec FP2211 2-Wire 4 Inch Submersible Well Pump, 115 Volts 1/2 HP 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   WARRANTY   3 year limited warranty     HORSEPOWER:  1/2   PERFORMANCE SERIES:  10 GPM   VOLTAGE:  115v, 60 Hz   NUMBER OF WIRES:  2 plus ground   BODY CONSTRUCTION:  Stainless Steel and Thermoplastic   MAXIMUM CAPACITY:  13.6 GPM   OPERATION RANGE:  20' to 150'   MAXIMUM DEPTH-TO-WATER:  150'   MAX PSI:  105 psi   PUMP DIAMETER:  3.78"   DISCHARGE PIPE SIZE:  1-1/4" NPT     RECOMMENDED BREAKER:  25 amp