Flotec FPPM3600D Thermoplastic Pedestal Sump Pump 1/3 HP The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps.   FEATURES Replaces any existing brand of 1/3 HP pedestal pump Long lasting thermoplastic construction Quick, easy installation Fits in a 12" diameter basin and offers a 1-1/4" discharge 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/3 MAXIMUM CAPACITY:  3000 GPH FLOW AT 10' LIFT:  2460 GPH SWITCH TYPE:  Vertical SWITCH ON LEVEL:  10-1/2" SWITCH OFF LEVEL:  2-1/2" MINIMUM SUMP DIAMETER:  12" MINIMUM SUMP DEPTH:  12" DISCHARGE PIPE SIZE:  1-1/4" FNPT MINIMUM PIPE SIZE:  1-1/4" MAXIMUM SOLID HANDLING SIZE:   CORD LENGTH:  6' AMP DRAW:  3.5 amps VOLTAGE:  115V, 60 HZ RECOMMENDED BREAKER:  15 amps LIQUID TEMP RANGE:  32°F to 70°F(0°-21°C)  

Flotec FPZS33V Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded 

Flotec FPZS33T Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FP4212 Cast Iron Convertible Jet Pump 1/2 HP KEY FEATURES Superior performance at depths to water of 100' or less Rugged, heavy-duty pump housing Ready-to-install dual-voltage 115v/230v motor - see manual for 230 volt conversion Pressure switch pre-wired with 30-50 PSI pressure setting WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  7.9 GPM (shallow setup) FLOW at 10' LIFT and 40 PSI:  7.1 GPM (shallow setup) MAX LIFT:  25' for shallow setup / 70' for deep setup MAXIMUM PRESSURE:  60 psi (shallow setup) / 54 psi (deep setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DRIVE PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1"NPT AMP DRAW (full load):  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FPZS25T Submersible Thermoplastic Sump Pump 1/4 HP Flotec's 1/4 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.   Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications   Switch Type: Tethered - Operates in 14" basins or larger Horse Power: 1/4 HP GPH: 3,200 Max Lift: 20' Solids Handling: 3/16" Discharge: 1.5" NPT Power Cord: 8', Grounded

Flotec FPZS50T Submersible Thermoplastic Sump Pump Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1/5" NPT Power Cord:  8', Grounded

Flotec FPZS50V Submersible Thermoplastic Sump Pump 1/2 HP Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. FEATURES Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FP4222 Cast Iron Convertible Jet Pump 3/4 HP Cast iron convertible jet pumps can be used in shallow or deep well applications in " diameter wells or larger and are pre-set for 30-50 PSI operation. KEY FEATURES Superior performance at depths to water of 100' or less Rugged, heavy-duty pump housing Ready-to-install 230 volt motor - see manual for 115 volt conversion Pressure switch pre-wired with 30-50 PSI pressure setting WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  3/4 MAXIMUM CAPACITY:  11.9 GPM (shallow setup) FLOW at 10' LIFT and 40 PSI:  10.8 GPM (shallow setup) MAX LIFT:  25' w/ shallow setup / 100' w/ deep well setup MAXIMUM PRESSURE:  60 psi w/ shallow setup / 54 psi w/ deep setup PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  6.1 amps on 230v / 12.2 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 20 amp for 115v MAXIMUM WATER TEMPERATURE:  140 F (60 C)

HYPRO 9203C CAST IRON PEDESTAL MOUNT PUMP The Hypro Cast Iron Pedestal Mount (9203C) pump model has a direct drive and a maximum free flow of 140 GPM. It has a maximum pressure of 180 P.S.I. as well as a maximum speed of 6,000 RPM.   Max. flow: 140 gpm/530 lpm (free flow) Max. pressure: 180 psi/12.4 bar (Shut off) Max. speed: 6000 rpm Max. fluid temperature: 140°C   Pedestal mount, direct drive Housing available: cast iron and stainless steel Port sizes: 1 ¼" NPT inlet, 1" NPT outlet Shaft: 5/8" solid Pump shaft rotation: CCW (9202S-R is CW) Impeller: glass-filled nylon (cast iron standard); glass filled polypropylene (stainless standard) Pump seals: Viton/ceramic standard (Life Guard silicon carbide, Buna-N ceramic and Viton/silicon carbide available) Life Guard silicon carbide standard in stainless steel pumps

Flotec FP0S1250X Water Removal Utility Pump 1/6 HP, 1200 GPH Good, dependable performance marks the Flotec FPOS1250X as the solution for many home dewatering applications.   KEY FEATURES Plastic construction Pumps to 3/16" depth Switch for automatic operation sold separately WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/6 HP MAXIMUM CAPACITY:  1200 GPH FLOW at 10' LIFT:  840 GPH DISCHARGE SIZE:  1" NPT (Female) VOLTAGE:  115v AC, 60 Hz CORD LENGTH:  8' w/ 3-prong grounded plug MAXIMUM WATER TEMPERATUE:  77°F (25°C)  

Flotec FP4312 Thermoplastic Convertible Jet Pump 1/2 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. KEY FEATURES Superior performance at depths to water of 100' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install dual voltage motor preset to 115v - see manual for 230 volt conversion WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9 GPM (shallow well setup) FLOW AT 10' LIFT and 40 PSI:  7.8 GPM (shallow well setup) MAX LIFT:  25' w/ shallow well jet kit / 70' w/ deep well jet kit MAX PSI:  62 psi (shallow well setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" MINIMUM SUCTION PIPE SIZE:  1-1/4" DRIVE PIPE SIZE:  1" DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FPSE2800A Thermoplastic Effluent Pump The FPSE2800A provides the answer to many effluent/dewatering situations where 3/4" solids handling is all that is needed. Automatic submersible effluent/dewatering pump Capable of handling 3/4" solids - ideal for basement installations, laundry facilities, underground parking, grain storage and construction sites Thermoplastic construction BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/3 MAXIMUM CAPACITY:  3600 GPH FLOW AT 10' LIFT:  2700 GPH SWITCH TYPE:  Tethered SWITCH ON LEVEL:  11-1/2" SWITCH OFF LEVEL:  4-1/2" DISCHARGE PIPE SIZE:  2" MINIMUM PIPE SIZE:  1-1/2" MAXIMUM SOLID HANDLING SIZE:  3/4" CORD LENGTH:  15' AMP DRAW:  7 amps VOLTAGE:  115v, 60 Hz

Flotec FP0020 Float Switch Flotec Replacement Float Switch Only for Pedestal Sump Pumps, Internally Mounted in the Motor   Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same

Simer 5023SS Pedestal Sump Pump, 1/3HP Simer Pedestal Sump Pump, Cast Iron and Stainless Construction, 1/3HP 115Volt, 1-1/2" NPT Discharge Port, up to 3480 GPH, Maximum Lift 20 Feet, 3 Prong Power Cord, Automatic Vertical Float Switch

Flotec FP0S1300X Tempest™ Water Removal Utility Pump 1/6 HP, 1470 GPH The Tempest™ is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.   KEY FEATURES Multipurpose pump for emergency basement and sump draining, emptying ponds, appliances, wash down and roof dewatering Draws water down to 3/16" Corrosion-resistant, continuous duty submersible pump Switch for automatic operation sold separately WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/6 MAXIMUM CAPACITY:  1470 GPH FLOW at 10' LIFT:  930 GPH DISCHARGE SIZE:  1" female (includes garden hose adapter) VOLTAGE:  115v AC, 60 Hz CORD LENGTH:  8' long / 18-3 wire / T-handle on pump connector MAXIMUM WATER TEMPERATURE:  77°F (25°C)