|
MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump
MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 15
Part #: MP21381
Size: 3 in. NPT
Flow-Rate: 320 GPM
Head Feet: 145
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
OEM
|
1762.20 |
|
|
Flotec FPDMP21SA Drill Pump for Water Removal - 225 GPH
Thermoplastic drill pump works with electric drills. Ideal to pump water or change oil with your electric drill as a power source.
FEATURES
Multi-purpose pump
Maximum pumping capacities up to 225 GPH
Minimum drill speed 1200 RPM
|
14.70 |
|
|
Flotec FP0S1250X Water Removal Utility Pump 1/6 HP, 1200 GPH
Good, dependable performance marks the Flotec FPOS1250X as the solution for many home dewatering applications.
KEY FEATURES
Plastic construction
Pumps to 3/16" depth
Switch for automatic operation sold separately
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/6 HP
MAXIMUM CAPACITY: 1200 GPH
FLOW at 10' LIFT: 840 GPH
DISCHARGE SIZE: 1" NPT (Female)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' w/ 3-prong grounded plug
MAXIMUM WATER TEMPERATUE: 77°F (25°C)
|
157.56 |
|
|
Flotec N76-35P Pump Body Front Portion
Flotec Pump Body Front Portion (Tank Body)
|
141.96 |
|
|
Flotec FP18-15BD Tethered Float Switch
KEY FEATURES
Piggyback Electrical Plug Allows Simple Electrical Connection
Works With Many Brands and Models of Submersible Sump Pump
Easy To Install
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
98.28 |
|
|
Flotec FP400C Sewage Pump System - 4/10 HP
Economical sewage pump system manufactured of durable thermoplastic construction. Ideal for basement installations, pumping below-grade toilets, and laundry facilities.
KEY FEATURES
Maximum pumping capacities up to 5250 GPH
Corrosion-resistant construction with multi-vane, non-clog vortex impeller
Grommets accept 4" PVC inlet, 2" PVC discharge and vent
Handles up to 2" solids
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: thermoplastic pump / structural foam basin
HORSEPOWER: 4/10
MAXIMUM CAPACITY: 5250 GPH
FLOW AT 10' LIFT: 2550 GPH
SWITCH TYPE: Tethered
DISCHARGE PIPE SIZE: 2"
MINIMUM PIPE SIZE: 2"
MAXIMUM SOLID HANDLING SIZE: 2"
CORD LENGTH: 8'
AMP DRAW: 18.5 amps
VOLTAGE: 115v, 60 Hz
|
784.08 |
|
|
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps.
Replacement pump body N76-46P covers the pump impeller and directs water flow through the pump. This part replaces a worn or damaged body to restore proper pumping.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
|
122.85 |
|
|
Flotec CYCLONE™ Water Removal Utility Pump
The CYCLONE™ pumping system is designed for every day or emergency use. Perfect for transferring or removing unwanted water from waterbeds, aquariums, or non-draining sinks.
KEY FEATURES
Multipurpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks
Self-priming at 8-10 ft. vertically
Corrosion-resistant, compact and portable
WARRANTY
90-day limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/12
MAXIMUM LIFT: 43'
MAXIMUM CAPACITY: 350 GPH
FLOW at 10' LIFT: 300 GPH
SWITCH TYPE: Manual Operation (No Switch)
SUCTION SIZE: Male Garden Hose
DISCHARGE SIZE: Male Garden Hose
MAXIMUM SOLIDS HANDLING SIZE: Clear Water Only
AMP DRAW (full load):
CORD LENGTH: 6' w/ 3-prong grounded plug
VOLTAGE: 115v AC, 60 Hz
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
207.48 |
|
|
Flotec FP0S1775A IntelliPump™ Water Removal Utility Pump, Auto On/Off, 1/4 HP, 1790 GPH
The IntelliPump | Just plug this pump in and it automatically checks for traces of water, whether you are pumping basements or draining puddles.
KEY FEATURES
Innovative electronic controlled pump - Pump starts every 2-1/2 minutes to check for water. Shuts off if water is not detected
Perfect for surfaces that collect water such as basements, rooftops, or any shallow flooded area
Corrosion-resistant engineered resin construction
WARRANTY
2 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/4 HP
MAXIMUM CAPACITY: 1790 GPH
FLOW at 10' LIFT: 1260 GPH
DISCHARGE SIZE: 1" NPT (female)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 15' with 3-prong grounded plug
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
328.38 |
|
|
Flotec FPSC1725X-03 Cast Aluminum Water Removal Utility Pump 1/4 HP 1250 GPH
Cast Aluminum construction provides years of service for those emergency water removal situations.
FEATURES
Heavy-duty, epoxy coated, cast aluminum construction
Portable pump for emergency water removal or emptying shallow flooded areas
Draws water down to 1/8"
Switch for automatic operation sold separately
3-year limited warranty
BODY CONSTRUCTION: Cast Aluminum
HORSEPOWER: 1/4 HP
MAXIMUM CAPACITY: 1320 GPH
FLOW AT 10' LIFT: 1020 GPH
DISCHARGE SIZE: 1¼" (male) NPT
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' with 3-prong grounded plug
MAXIMUM WATER TEMPERATURE: 120°F (50°C)
|
191.10 |
|
|
Flotec FP0S1300X Tempest™ Water Removal Utility Pump 1/6 HP, 1470 GPH
The Tempest™ is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.
KEY FEATURES
Multipurpose pump for emergency basement and sump draining, emptying ponds, appliances, wash down and roof dewatering
Draws water down to 3/16"
Corrosion-resistant, continuous duty submersible pump
Switch for automatic operation sold separately
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/6
MAXIMUM CAPACITY: 1470 GPH
FLOW at 10' LIFT: 930 GPH
DISCHARGE SIZE: 1" female (includes garden hose adapter)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' long / 18-3 wire / T-handle on pump connector
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
184.08 |
|
|
Flotec FP4105 Cast Iron Jet Pump 1/2 HP
New cast iron shallow well jet pump is ideal for wells with pumping levels of 25' or less. Self-priming after the pump housing is initially filled with water.
KEY FEATURES
Reliable performance at 25' depth to water or less
Maximum pressures of 63 PSI and maximum pumping capacities to 5.1 GPM
Pump housing is constructed of heavy-duty cast iron and is ready to install
115 volt 1/2 HP
Fan cooled, completely enclosed motor
1" Suction Port and 1" Discharge Port
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 5.6 GPM
FLOW at 10' LIFT and 40 PSI: 4.5 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 63 PSI
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 7.2 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
381.42 |
|
|
Flotec FP5512 Cast Iron Centrifugal Pump 1/2 HP
Economical, general purpose centrifugal pumps can be used for water transfer, circulation, fountains, waterfalls, pressure boosting and sprinkling.
FEATURES
Superior performance at depths to water of 25' or less
Rugged, heavy-duty cast iron pump housing
Ready-to-install 230 volt motor (dual voltage)
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 22 GPM
MAX LIFT: 25'
MAXIMUM DISCHARGE PRESSURE: 36 psi
MAXIMUM INLET PRESSURE:
MAXIMUM TOTAL PRESSURE:
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 4.7 amps on 230v / 9.4 amps on 115v
VOLTAGE: 230v / 115v , 60 Hz
MAXIMUM WATER TEMPERATURE: 140 °F (60 °C)
RECOMMENDED BREAKER: 15 amp on 230v / 15 amp on 115v
|
440.70 |
|
|
Flotec FPP1850 Seal Kit
The Flotec FPP1850 Shaft Seal and O-Ring Kit is for the Flotec FP4815 pump.
Remember that all Flotec, Simer and Sta-Rite parts are interchangeable as long as the part numbers are the same.
|
65.52 |
|
|
Flotec FP4012-10MK Overhaul Kit
Flotec- Overhaul Kit for Flotec FP4012-10, Includes Seal Plate, Seal Plate O-Ring, Seal, Impeller, Priming Baffle, Nozzle/Diffuser Assembly, Nozzle O-Ring.
This Kit Does Not Fit The FP4012-08 Pump. Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
196.09 |
|