|
Flotec FP4012-10 Thermoplastic Shallow Well Jet Pump 1/2 HP
This new revision provides good pressure pumping from wells where the depth-to-water is 25' or less.
KEY FEATURES
Perfect for shallow wells (depth-to-water less than 25')
Thermoplastic construction for higher corrosion resistance
1-1/4" Suction / 1" Discharge
Comes with pre-wired 30/50 pressure switch
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 8 GPM
FLOW at 10' LIFT and 40 PSI: 6.4 GPM
MAX LIFT: 25'
MAX PRESSURE: 77 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 9.4 amps
VOLTAGE: 115v/230v, 60 Hz (factory preset to 115v)
RECOMMENDED BREAKER: 15 amp
MAXIMUM WATER TEMPERATURE: 140 °F (60 °C)
|
432.90 |
|
|
Here is a list of some of the new items we have added ofer the last few days at CLR Marine.
Part Number Product Title
10992 LILLY 406 SHIM/LONG TAPER
13762 INTERPHASE T1-1200-032 BT 200K HOR/VERT SCAN F/ TWIN PC/VIEW
16561 STANDARD HX471SS SILVER VHF HH AM002N005
17598 C-MAP AF-M204 SD CARD FORMAT SOUTHERN AFRICA
19030 BLUE SEA 7114 CIRCUIT BREAKER 80A
20216 BLUE SEA 2207 BLACK TERMINAL FEED-THROUGH
25433 MINN KOTA MK-330 3 BANK X 10 AMPS
27937 MUSTANG LIL' LEGENDS INFANT'S FLOATER VEST UP TO 30 lbs.
28704 SIMRAD TM NYLON D/S/T 600W TRI-DUCER 50/200 FOR NX40,45
31398 MINN KOTA PONTOON 55/HAND 12V 55LB 52"
33308 PROMARINER PRONAUTIC REMOTE DISPLAY HELM CONTROL / REMOTE
34940 FULTON 3200# CABLE WINCH 2-SPD W/ BRAKE HP SERIES
35446 NAVPOD PP4301 POWERPOD PRECUT FOR RAYMARINE ST60
39439 AQUATIC 6.5" WATERPROOF STEREO SPEAKER BLACK GRILL-PAIR
39892 OTTERBOX DEFENDER SERIES CASE HTC DESIRE
41017 OTTERBOX COMMUTER SERIES NOKIA E7
42050 MIDLAND NT3 5 WATT HANDHELD VHF RADIO W/ BELT CLIP
42531 JABSCO PAR-MAX WASHDOWN PUMP KIT 4.0GPM 60PSI 12VDC
42532 ONYX 7501 FLOTATION JACKET LARGE NAVY BLUE
42533 ONYX 7501 FLOTATION JACKET LARGE RED/GREY
42534 ONYX 7501 FLOTATION JACKET X-LARGE NAVY BLUE
42535 ONYX 7501 FLOTATION JACKET X-LARGE RED/GREY
42576 TIMEX IRONMAN 10 LAP MID SIZE WATCH BRIGHT GREEN
42577 TIMEX IRONMAN 30 LAP OVERSIZE WATCH BLUE/BLACK/SILVER
42584 TIMEX IRON KIDS DIGITAL WATCH BLUE/SILVER
42462 HUMMINBIRD FISHFINDER 570
42505 GARMIN NUVI 3450
42508 GARMIN GTM 60 DIGITAL 3D TRAFFIC RX 2400 3400 SERIES
42509 GARMIN NUVI 2455LT
42511 GARMIN NUVI 2475LT
42513 GARMIN NUVI 2555LT
42521 JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 50PSI 12VDC
42522 JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 50PSI 24VDC
42523 JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 25PSI 12VDC
42524 JABSCO AUTOMATIC WATER SYSTEM PUMP 4.0GPM 25PSI 24VDC
42525 JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 50PSI 12VDC
42526 JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 50PSI 24VDC
42527 JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 25PSI 12VDC
42528 JABSCO AUTOMATIC WATER SYSTEM PUMP 5.0GPM 25PSI 24VDC
42529 JABSCO AUTOMATIC WASHDOWN PUMP 5.0GPM 70PSI 12VDC
42551 TIMEX HEALTH TOUCH HRM WATCH SILVER/BLACK/RED
42552 TIMEX HEALTH TOUCH HRM WATCH BLACK/SILVER
42553 TIMEX HEALTH TRACKER WATCH BLUE/GRAY FLOWER
42554 TIMEX HEALTH TRACKER WATCH BLACK/GRAY FLOWER
42559 TIMEX IM ALLDAY 50 LAP PLUM SILICONE MS WATCH
37676 NAVIONICS PLATINUM SOUTH AMERICA EAST ON SD/MICRO SD
37679 NAVIONICS PLATINUM SOUTH AMERICA EAST ON CF CF/909P-2
42306 KESTREL RH CALIBRATION KIT RELATIVE HUMIDITY
42588 POWERHOUSE ICE EATER 1 HP 115V WITH 100FT CORD
42589 POWERHOUSE ICE EATER 1 HP 230V WITH 100 FT CORD
42590 POWERHOUSE TIMER 115V
|
|
|
Flotec FP4822 Stainless Steel Shallow Well Jet Pump 3/4 HP
Stainless steel shallow well jet pumps are heavy-duty, durable, corrosion resistant, high pressure and offer efficient non-stop operation for years.
KEY FEATURES
Superior performance at depths to water of 25' or less
Heavy-duty, stainless steel pump housing for highest corrosion resistance
Ready-to-install 230 volt motor - see manual for 115 volt conversion
1-1/4" NPT suction and 1" NPT discharge pipe sizes
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Stainless Steel
HORSEPOWER: 3/4
MAXIMUM CAPACITY: 11 GPM
FLOW at 10' LIFT and 40 PSI: 11 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 52 psi
MAXIMUM INLET PRESSURE:
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: NPT
AMP DRAW (full load): 7.4 amps on 230v / 14.8 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp on 230v / 20 amp on 115v
MAXIMUM WATER TEMPERATURE: 122°F (50 °C)
|
734.40 |
|
|
Flotec FP4022-10 Thermoplastic Shallow Well Jet Pump 3/4 HP
This new revision of an "old hand" provides good pressure pumping from wells where the depth-to-water is 25' or less.
KEY FEATURES
Perfect for shallow wells (depth-to-water less than 25')
Thermoplastic construction for higher corrosion resistance
1-1/4" Suction / 1" Discharge
Comes with pre-wired 30/50 pressure switch
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 3/4
MAXIMUM CAPACITY: 12 GPM
FLOW at 10' LIFT and 40 PSI: 9.7 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 78 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 6.1 amps on 230v / 12.2 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp on 230v / 20 amp on 115v
MAXIMUM WATER TEMPERATURE: 140 °F (60 °C)
|
511.50 |
|
|
Flotec FP4432 Vertical Deep Well Jet Pump 1 HP
Vertical deep well jet pump can be used in 4" diameter or larger wells up to 260', or in 2" diameter wells up to 180'.
KEY FEATURES
Superior performance at depths to water of 50' or more
Rugged, heavy-duty cast iron pump housing
Ready-to-install 230 volt motor - see manual for 115 volt conversion
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1
MAXIMUM CAPACITY: 12 GPM
FLOW AT 50' LIFT and 40 PSI: 11 GPM
MAX LIFT: 260' for 4" or larger well / 180' for 2" well
PRESSURE SWITCH SETTING: 40/60
SUCTION PIPE SIZE: 1-1/4" NPT
DRIVE PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 9.6 amps on 230v / 19.2 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp for 230v / 20 amp for 115v
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
1017.36 |
|
|
Flotec FP4312 Thermoplastic Convertible Jet Pump 1/2 HP
Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service.
KEY FEATURES
Superior performance at depths to water of 100' or less
Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
Ready-to-install dual voltage motor preset to 115v - see manual for 230 volt conversion
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 9 GPM (shallow well setup)
FLOW AT 10' LIFT and 40 PSI: 7.8 GPM (shallow well setup)
MAX LIFT: 25' w/ shallow well jet kit / 70' w/ deep well jet kit
MAX PSI: 62 psi (shallow well setup)
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4"
MINIMUM SUCTION PIPE SIZE: 1-1/4"
DRIVE PIPE SIZE: 1"
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 9.9 Amps on 115V / 4.95 Amps on 230V
VOLTAGE: 115v/230v, 60 Hz (factory preset to 115v)
RECOMMENDED BREAKER: 15 amp
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
516.00 |
|
|
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps.
Replacement pump body N76-46P covers the pump impeller and directs water flow through the pump. This part replaces a worn or damaged body to restore proper pumping.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
|
122.85 |
|
|
Flotec FP4122 Well Pump 3/4Hp 115/230V
Flotec Shallow Well Jet Pump, Cast Iron Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1” NPT Discharge Ports, up to 14.4GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
720.00 |
|
|
FP4432 Overhaul Kit
Use for Flotec model FP4432 deep well jet pump
Includes impeller, diffuser, and all needed seals and gaskets
Restores like-new performance
|
160.16 |
|
|
Flotec FP4832 Shallow Well Jet Pump 1HP
Flotec Shallow Well Jet Pump
Stainless Steel Construction
1HP 115/230V
1-1/4”NPT Suction x 1” NPT
Discharge Ports, up to 18.4GPM at 40psi
Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
765.36 |
|
|
Flotec FPSC1725X-03 Cast Aluminum Water Removal Utility Pump 1/4 HP 1250 GPH
Cast Aluminum construction provides years of service for those emergency water removal situations.
FEATURES
Heavy-duty, epoxy coated, cast aluminum construction
Portable pump for emergency water removal or emptying shallow flooded areas
Draws water down to 1/8"
Switch for automatic operation sold separately
3-year limited warranty
BODY CONSTRUCTION: Cast Aluminum
HORSEPOWER: 1/4 HP
MAXIMUM CAPACITY: 1320 GPH
FLOW AT 10' LIFT: 1020 GPH
DISCHARGE SIZE: 1¼" (male) NPT
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' with 3-prong grounded plug
MAXIMUM WATER TEMPERATURE: 120°F (50°C)
|
191.10 |
|
|
Simer 2800 Shallow Well Jet Pump, 1/2HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 1/2HP TEFC Motor 115Volt only, 1” NPT Ports, up to 5.1GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
381.42 |
|
|
Simer 2805E-02 Shallow Well Jet Pump, 1/2HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 1/2HP 115/230Volt Motor, 1-1/4”NPT Suction x 1”NPT Discharge Ports, Best for Shallow Wells to 20 Feet, Maximum Lift 25 Feet, up to 8.5GPM, Adjustable Pressure Switch Set to 30psi On / 50psi
|
465.00 |
|
|
Sta-Rite SNC-L Shallow Well Jet Pump 1/2HP
1/2 HP - 115/230 Volt - Shallow Well Jet Pump
The ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25 feet deep. Self-priming after the priming chamber has been filled with water.
APPLICATIONS
Water systems and sprinkling
FEATURES
Quality Construction
Close grained cast iron body. Drain port provided for easy winterizing.
Built-in Jet
High strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service.
Noryl Impeller
Precision-molded for perfect balance ultra-smooth for highest performance and efficiency.
Precision Molded Diffuser
Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser.
Mechanical Shaft Seal
Precision lapped and highly polished carbonceramic, stainless steel construction. Internal design guarantees continuous water lubrication.
Motor Windings
Superior insulation materials protect against excessive moisture and contaminants assure prolonged motor life.
Balanced Rotor
Die cast under high pressures for uniform performance and greater efficiency, dynamically balanced.
Heavy-duty Ball Bearings
Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
Pump and Motor Shaft
Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment.
Dustproof Cover
All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components.
Pressure Switch
Professional quality, allows cut-in adjustments.
SPECIFICATIONS
Max. Liquid Temperature: 140°F
Max. Inlet Pressure: 50 PSI
|
869.76 |
|
|
Sta-Rite PNC-10 Shallow Well Jet Pump 1/2HP
Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 7GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
797.04 |
|