Mast Platform for KVH M7/TV6 & Intellian i6/D6 Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Units: Glomex - 20"-27" satdomes Intellian - i5, i6, i6P, S6HD, FB500 and v45C   JRC - JUE 500 (24")  KVH - M7, M7SK, FB500(26"), V7, V7-IP, TV6, HD7 and TV3-IP(24")  Oyster - 50MGS, 75MGS, 77MGS and TRX-7MGS  Raymarine - 60STV  Seatel / Cob Ham - C18 & FX250 (24")  Thrane & Thrane - Sailor FB500 & Fleet 55+  VDO - Ocean Line 345, 360, 445 and 460 

Mast Mount f/KVH TV1 Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.  Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Units: Intellian - 12 & i3 KVH - M1DX, M1, TV1, M2, M3, M3DX, M3ST, V3, V3-IP, TV3, V3HTS and V30 Raymarine - 33STV & 37STV  

SM-18-A Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Units: Intellian - i4 & i4P KVH - M5, FB250(18"), TV5  Raymarine - 45STV  Sea Tel/Cobham - ST14, FX150 (16.5")  VDO - Ocean Line 337 

Low Profile Satdome Adapter for KVH, Raymarine, and Intellian Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation.

Intellian/KVH/Raymarine/Cobham Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68610 Vision Series Mounting Plate is designed for Intellian i6, K6, d6, S60, FB500, KVH M7, HD7 TV6, Tracphone V7, & Raymarine 60STV .  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Modular Plate for KVH/Intellian/Raymarine/Sea-King/Sea-Tel/VDO Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique Design No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.

i6 System w/23.6" Reflector & All Americas LNB Must Ship Truck Freight The Intellian i6 provides superior tracking performance and efficiency compared to antenna systems in similar size. With its stylish dome, the i6 is ideal for boats over 65 feet. The i6 brings boaters the excitement and variety of satellite TV programs while the vessels are traveling around coastal or blue water regions, the larger reflector size of the Intellian i6 increases the range that the unit will operate. You will never have to compromise on reception or quality. The i6 offers the highest signal strength available along with Intellian patented innovations, Wide Range Search (WRS) and Dynamic Beam Tilting (DBT) technologies. Therefore, the i6 can always offer the most precision tracking capabilities and superior satellite signal reception while the vessel is cruising at high speed or in rough sea conditions. The most innovative design of i6 is the integrated smart HD and TriSat modules in the antenna control unit (ACU) which allows boaters to access their favorite HDTV channels from leading satellite TV service providers freely just like they are used to do at home. Combined with the new built in WiFi enables simple one-touch upgrades using the Aptus App. The i6 brings you trouble-free installation and operation with its single cable design between the antenna and the control unit. With the Intellian MIM Switch (M2-TD02) sold separately, boaters can enjoy changing Dish Network HD channels with automatic satellite switching just like a home system. See the installation guide of DISH Network MIM for further details. Plus, the Intellian i6 has a built-in GPS system to enhance satellite acquisition time and accuracy. For DirecTV users the Intellian i6 offers the full range of SD channels, upgrade to the Intellian s6HD for HD programing from DirecTV. Features: Fully Automated System Automatic satellite search and identification function 2-axis step motor for controlling the antenna pedestal High Quality Antenna 23.6 inch (60 cm) Reflector antenna for receiving Ku-Band (10.7 12.75GHz) satellite signal LHCP/RHCP or Horizontal/Vertical polarization Enabling powerful signal gain Superior Dynamic Tracking Dynamic Beam Tilting (DBT) by rotating sub-reflector with high speed BLDC motor Fastest Search Algorithm Wide Range Search (WRS) algorithm Statistical search algorithm DVB (Digital Video Broadcasting) Signal Identification High speed identification employing DVB decoder QPSK demodulator lock for DSS signal Built-in GPS System Embedded GPS, which allows for the system to upload the GPS data automatically into the system New Antenna Control Unit Easy satellite information change and update via WiFi using the Aptus App Easy antenna status check and automatic diagnosis Easy antenna control using Aptus graphical control App Reliable power supply to the antenna and to the MIM module Embedded HD module and TriSat function Industry leading 3-year parts and workmanship guarantee with a 2-year labor warranty for all antenna systems, ensuring peace of mind with your hardware investment All Satellite Systems include the following parts as standard: Antenna & Radome 23.6" (60 cm) Reflector & North Americas LNB ACU (Antenna Control Unit) with WiFi connection for upgrades Built-in HD Module for Ku-Band HD (when available) Built-in GPS and NMEA 0183 GPS interface Built-in Pre-programmed Global satellite library Aptus App, downloadable Installation & Operation Manual Installation Template Quick Installation Guide Cable Kit: 49ft (15 m) x 1EA Antenna-ACU RG6 Coaxial Cables 10ft (3 m) x 1EA ACU-IRD RG6 Coaxial Cables 33ft (10 m) x 1EA DC ACU Power Cable 6ft (1.8 m) x 1EA PC Serial Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i6 All-Americas TV Antenna System & SWM-30 Kit i6 All-Americas TV Antenna System The Intellian i6 provides superior tracking performance and efficiency compared to antenna systems of similar size. With its stylish dome, the i6 is ideal for boats over 65 feet. The i6 brings boaters the excitement and variety of satellite TV programs while the vessels are traveling around coastal or blue water regions, the larger reflector size of the Intellian i6 increases the range that the unit will operate. You will never have to compromise on reception or quality. The i6 offers the highest signal strength available along with Intellian patented innovations, Wide Range Search (WRS), and Dynamic Beam Tilting (DBT) technologies. Therefore, the i6 can always offer the most precision tracking capabilities and superior satellite signal reception while the vessel is cruising at high speed or in rough sea conditions. The most innovative design of i6 is the integrated smart HD and TriSat modules in the antenna control unit (ACU) which allows boaters to access their favorite HDTV channels from leading satellite TV service providers freely just like they are used to do at home. Combined with the built-in WiFi enables simple one-touch upgrades using the Aptus App. The i6 brings you trouble-free installation and operation with its single cable design between the antenna and the control unit. With the Intellian MIM Switch (M2-TD02) sold separately, boaters can enjoy changing Dish Network HD channels with automatic satellite switching just like a home system. See the installation guide of DISH Network MIM for further details. Plus, the Intellian i6 has a built-in GPS system to enhance satellite acquisition time and accuracy. For DirecTV users the Intellian i6 offers the full range of SD channels, upgrade to the Intellian s6HD for HD programming from DirecTV. Features: Fully Automated System Automatic satellite search and identification function 2-axis step motor for controlling the antenna pedestal High-Quality Antenna 23.6 inch (60 cm) Reflector antenna for receiving Ku-Band (10.7 12.75GHz) satellite signal LHCP/RHCP or Horizontal/Vertical polarization Enabling powerful signal gain Superior Dynamic Tracking Dynamic Beam Tilting (DBT) by rotating sub-reflector with high-speed BLDC motor Fastest Search Algorithm Wide Range Search (WRS) algorithm Statistical search algorithm DVB (Digital Video Broadcasting) Signal Identification High-speed identification employing DVB decoder QPSK demodulator lock for DSS signal Built-in GPS System Embedded GPS, which allows for the system to upload the GPS data automatically into the system SWM-30 Kit The latest and greatest external multi-switch from DIRECTV feeds up to 26 tuners in two banks of 13 for easy wiring. Supports 4K and the use of the international WorldDIRECT dish. Also included is a 29-volt power inserter that supports the SWM-8 or SWM-16 multi-switch remotely through a coax cable. It can operate from the power passing port of a splitter, or on the SWM-16, which can be run from the separate PWR port. Features: Supports two banks of 13 tuners (no MoCA/MRV crossover) Replacement for SWM-8, SWM-16, and SWM-32 multi-switches Compatible with previous generation Slimline dishes Compatible with Genie and Genie 2 For use with WorldDIRECT dish, use WD-DIPLEXER-09 diplexer sold separately For use with 4K installations, use SL5RB or SL3RBAH LNB (6 coax cables to the SWM) Output level -25dBm Powers any coax-powered device up to 13V, 500mA Requires SWM-capable receivers (H21 or higher, D12, HR20 or higher, HS17) Can be used for the SWM-8 and SWM-16 Outputs: 1 IRD & 1 SWM SWM Port Output: 29V

3" Low Profile Satdome Mount f/KVH M1/M1DX/TV1, Intellian i1 & i2, Raymarine 33STV Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. Durable Construction The UV stable ABS plastic can withstand any abuse you throw at it and is completely corrosion free. Easy Installation Four pre-drilled mounting holes and water tight gasket is provided for a nice simple and hassle free installation. Space Saving Has a very small footprint making it the perfect choice when you are limited on space.

Universal Mast Mount Platform for 12"18" Radome Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Manufacturers: Furuno JRC Koden Lorenz Sitex VDO

18" Radar Mast Platform Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Manufacturers: B&G Garmin Humminbird Lowrance Raymarine SImrad

Mast Bracket with Flybridge Adapter Kit 18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms. Features: Anodized Marine Grade Aluminum and Powder Coated Brilliant White Heavy duty swiveling feet fit most mast and poles adding more strength and durability to platforms Models available for all brands of radomes

IsoMat Mast Platform Adapter This is an adapter for boats with Isomat masts (integral track at the front). This adapter is installed between the platform and the platform mounting feet, and allows the mounting feet to spread out wider.

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or Larger Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance. Heavy Duty Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.

Mast Mount for FLIR Thermal Camera & Raymarine M-Series Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.  Heavy Duty Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.