Dome Top Only for TV5 with Mounting Hardware Features: Top Half Only Specifically for KVH's TV5 includes mounting hardware

Dome Top Only for HD7 with Mounting Hardware Features: Top Half Only Specifically for KVH's HD7 includes mounting hardware

Dome Top Only for TV3 with Mounting Hardware Features: Top Half Only Specifically for KVH's TV3 includes mounting hardware

WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4° Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Mounts between PowerTower® mount and base of radar. Compatible with: Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - AS 21RD4KW, HB 2124 CHIRP radars Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-12 radar Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A rugged, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine Grade Polymer Dimensions (L x W ) - 11.10" x 9.09" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual

X52 Tilt Mechanism w/Mounting Hardware Tilt range of 48° and five locking positions - suitable on tilt mount helms X52 tilt mechanism fits Ultraflex tilt mount rotary and rack and pinion steering helms as well as Ultraflex tilt mount hydraulic pumps except SilverSteer™ and MasterDrive™ steering systems

TracVision TV5 w/IP-Enabled TV-Hub & Linear Universal Quad-Output LNB w/Manual Skew **LNB Kit Pack 72-0825 required for SKY Mexico service** Combine Big Performance with Compact Size With 30% greater reception than other 45cm (18") systems, you'll enjoy satellite TV reception where few others can provide it. TracVision TV5 offers outstanding high performance tracking and reception, as well as compatibility with DIRECTV® U.S., DIRECTV Latin America, DISH Network®, Bell TV, and circular and linear Ku-band services worldwide. This rugged system is ideal for sportfishing boats or boats venturing offshore or to the islands. Sophisticated Technology that's Simple to Use With advanced technology from KVH, the leader in marine satellite television, the TracVision TV5 provides fast satellite acquisition no matter what the sea conditions, and stays locked on ensuring excellent performance. For ease of use, KVH integrated simplicity into its sophisticated technology: TracVision TV-Hub, a streamlined IP-enabled antenna control unit, enables automatic satellite switching User-friendly interface provides a wizard for easy installation and setup as well as system information at your fingertips from any smartphone, tablet, smart TV, or computer Highlights 45cm (18") diameter antenna features proprietary RingFire™ technology for stronger signals, wider geographic coverage, and better reception Supports DIRECTV U.S., DIRECTV Latin America, DISH Network, Bell TV, and circular and linear Ku-band services worldwide Supports multiple receiver installations Low elevation angle for better tracking in northern latitudes Linear Universal Quad LNB configuration offers optional built-in GPS and autoskew Tri-Americas LNB option for seamless TV throughout the Americas Sleek IP-enabled TracVision TV-Hub delivers easy setup and operation, and easy user interface for system information from any smartphone, tablet, smart TV, or computer HDTV compatible (Ku-band services only) Integrated Single Wire Multiswitch (SWM-8) built into belowdecks TV-Hub supports up to 8 DIRECTV receivers Single coaxial cable for power, data, and video enables easy installations and retrofits DVB-S2 compatible Advanced inertial-based stabilized search for fast satellite acquisition High performance tracking with advanced algorithms for crystal-clear television picture in heavy seas Built-in worldwide satellite library IP AutoSwitch option for multiple receiver installations - for simple auto-switching on Dish Pro and DiSEqC-compatible services World-class warranty coverage and support TracVision TV-Hub The innovative TracVision TV-Hub integrates the advanced functionality of the TV-series system into one streamlined unit: IP-enabled antenna control unit with Ethernet connection and built-in Wi-Fi interface allows access to system information from any Wi-Fi device Automatic satellite switching makes it easy to access all programming and local channels wherever you travel, and with whatever service you use Built-in SWM-compatible technology supports DIRECTV programming Built-in DISH Pro output supports DISH Network and Bell TV service Built-in DiSEqC protocol supports linear TV services around the world Two output ports provide the flexibility to use legacy receivers and expand SWM capability Status indicators quickly convey information about antenna function and power 10-30 VDC input provides power to the TV-Hub, which in turn provides power to the antenna NMEA 0183/2000 input for heading and GPS enable fastest satellite acquisition RingFire Technology  KVH's proprietary RingFire technology is a remarkable breakthrough in antenna design, fusing precisely shaped, tuned parabolic dish antennas with custom-designed, dual-mode feed tubes and uniquely modified LNBs. RingFire technology provides unmatched illumination of the reflector resulting in signal strengths comparable to competitors' larger antennas. This means that with TracVision, you'll enjoy wider geographic coverage and better reception than with competing antennas, even in extreme weather.

TracVision TV5 w/IP-Enabled TV-Hub & Linear Universal Quad-Output LNB w/Autoskew & GPS  **LNB Kit Pack 72-0825 required for SKY Mexico service** Combine Big Performance with Compact Size With 30% greater reception than other 45cm (18") systems, you'll enjoy satellite TV reception where few others can provide it. TracVision TV5 offers outstanding high performance tracking and reception, as well as compatibility with DIRECTV® U.S., DIRECTV Latin America, DISH Network®, Bell TV, and circular and linear Ku-band services worldwide. This rugged system is ideal for sportfishing boats or boats venturing offshore or to the islands. Sophisticated Technology that's Simple to Use With advanced technology from KVH, the leader in marine satellite television, the TracVision TV5 provides fast satellite acquisition no matter what the sea conditions, and stays locked on ensuring excellent performance. For ease of use, KVH integrated simplicity into its sophisticated technology: TracVision TV-Hub, a streamlined IP-enabled antenna control unit, enables automatic satellite switching User-friendly interface provides a wizard for easy installation and setup as well as system information at your fingertips from any smartphone, tablet, smart TV, or computer Highlights 45cm (18") diameter antenna features proprietary RingFire™ technology for stronger signals, wider geographic coverage, and better reception Supports DIRECTV U.S., DIRECTV Latin America, DISH Network, Bell TV, and circular and linear Ku-band services worldwide Supports multiple receiver installations Low elevation angle for better tracking in northern latitudes Linear Universal Quad LNB configuration offers optional built-in GPS and autoskew Tri-Americas LNB option for seamless TV throughout the Americas Sleek IP-enabled TracVision TV-Hub delivers easy setup and operation, and easy user interface for system information from any smartphone, tablet, smart TV, or computer HDTV compatible (Ku-band services only) Integrated Single Wire Multiswitch (SWM-8) built into belowdecks TV-Hub supports up to 8 DIRECTV receivers Single coaxial cable for power, data, and video enables easy installations and retrofits DVB-S2 compatible Advanced inertial-based stabilized search for fast satellite acquisition High performance tracking with advanced algorithms for crystal-clear television picture in heavy seas Built-in worldwide satellite library IP AutoSwitch option for multiple receiver installations - for simple auto-switching on Dish Pro and DiSEqC-compatible services World-class warranty coverage and support TracVision TV-Hub The innovative TracVision TV-Hub integrates the advanced functionality of the TV-series system into one streamlined unit: IP-enabled antenna control unit with Ethernet connection and built-in Wi-Fi interface allows access to system information from any Wi-Fi device Automatic satellite switching makes it easy to access all programming and local channels wherever you travel, and with whatever service you use Built-in SWM-compatible technology supports DIRECTV programming Built-in DISH Pro output supports DISH Network and Bell TV service Built-in DiSEqC protocol supports linear TV services around the world Two output ports provide the flexibility to use legacy receivers and expand SWM capability Status indicators quickly convey information about antenna function and power 10-30 VDC input provides power to the TV-Hub, which in turn provides power to the antenna NMEA 0183/2000 input for heading and GPS enable fastest satellite acquisition RingFire Technology  KVH's proprietary RingFire technology is a remarkable breakthrough in antenna design, fusing precisely shaped, tuned parabolic dish antennas with custom-designed, dual-mode feed tubes and uniquely modified LNBs. RingFire technology provides unmatched illumination of the reflector resulting in signal strengths comparable to competitors' larger antennas. This means that with TracVision, you'll enjoy wider geographic coverage and better reception than with competing antennas, even in extreme weather.

TV1 Dome Top with Labels & Mounting Hardware *Base Not Included Replacement dome top for KVH TV1 (does not include base).

Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed Base Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome

12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate Required Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*

22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required  Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*

Vision Series Mounting Plate for Simrad HALO™ Open Array - Hard Top Only This powder coated marine-grade aluminum plate is used to mount a Simrad HALO™ Open Array on a hard top. The lifted mounting surface prevents drilling through an internal center conduit on many hard tops. This product is used independently and is not compatible with the other Vision Series Mounts and Plates.

Aurora LED Dome Light - White & Red Output - Flush Mount LED replacement for the ubiquitous dome light provides bright, wide even light. The Aurora LED Dome Light has clean look, an intuitive and reliable switch, and a notable level of quality. Includes IP67 immersion protection with multiple color output options and dimming. Features: Dual-color with dimming Built-in bezel switch Completely sealed, IP67 Compliant Easy 2-wire hook up 3-year warranty

Aurora LED Dome Light - White & Blue Output - Flush Mount LED replacement for the ubiquitous dome light provides bright, wide even light. The Aurora LED Dome Light has clean look, an intuitive and reliable switch, and a notable level of quality. Includes IP67 immersion protection with multiple color output options and dimming. Features: Dual-color with dimming Built-in bezel switch Completely sealed, IP67 Compliant Easy 2-wire hook up 3-year warranty

Z-30 Top Gun Outrigger Kit - 15' Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing kits make it simple to have your boat ready to fish upon receipt. If your boat came "outrigger ready" with a Rupp outrigger mounting plate or similar plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go. This package comes complete with a pair of Z-30 Bolt-In Top Gun Radial bases, a pair of 15' Telescoping poles and a complete single line rigging kit with Klicker release clips. Top Gun Telescoping Poles - 15' Pair Our 15 foot telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping poles an obvious choice. Our telescoping poles are an ideal match for any of our Top Gun outrigger bases. Every part of these telescoping poles are fully serviceable, easy replaceable and made in the USA. O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp outrigger bases. Top Gun Bolt-In Z-30 Bases - Pair An innovative advance in Top Gun engineering, Rupp's Z-30 gear drive system offers unmatched ease of operation for top mount outriggers. Simply turning the palm-size handle deploys and retrieves riggers smoothly and effortlessly with an outstanding 30 to 1 advantage. Z-30 Top Guns are engineered for durability with a high strength, forged aluminum body that protects cutting edge components. Now with anodized aluminum knob and other enhancements. Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and below top operation. Designed to accept Rupp Top Gun poles in 15' or 18'. Top Gun Rigging Kit w/Klickers Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.