|
Dome Top Only for HD7 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's HD7 includes mounting hardware
|
1189.27 |
|
|
Dome Top Only for TV3 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's TV3 includes mounting hardware
|
351.00 |
|
|
Dome Top Only for TV5 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's TV5 includes mounting hardware
|
801.46 |
|
|
WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4°
Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.
Mounts between PowerTower® mount and base of radar.
Compatible with:
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - AS 21RD4KW, HB 2124 CHIRP radars
Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-12 radar
Features:
Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge
4° Base Wedge for mounting under PowerTower®
A rugged, marine-grade, UV stable wedge
Compatible with radomes from most radar manufacturers
Technical Specifications:
Material - Marine Grade Polymer
Dimensions (L x W ) - 11.10" x 9.09"
Angle - 4°
In the Box:
Wedge
Base seal
Instruction manual
*Sold as an Individual
|
134.33 |
|
|
X52 Tilt Mechanism w/Mounting Hardware
Tilt range of 48° and five locking positions - suitable on tilt mount helms
X52 tilt mechanism fits Ultraflex tilt mount rotary and rack and pinion steering helms as well as Ultraflex tilt mount hydraulic pumps except SilverSteer™ and MasterDrive™ steering systems
|
171.68 |
|
|
TV1 Dome Top with Labels & Mounting Hardware *Base Not Included
Replacement dome top for KVH TV1 (does not include base).
|
341.36 |
|
|
Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed Base
Features:
316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate
The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome
|
288.00 |
|
|
12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate Required
Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
Eliminate Interference
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.
Universal
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
Modular Top Plate
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*
|
1008.00 |
|
|
22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required
Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
Eliminate Interference
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.
Universal
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
Modular Top Plate
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*
|
1488.00 |
|
|
Vision Series Mounting Plate for Simrad HALO™ Open Array - Hard Top Only
This powder coated marine-grade aluminum plate is used to mount a Simrad HALO™ Open Array on a hard top. The lifted mounting surface prevents drilling through an internal center conduit on many hard tops.
This product is used independently and is not compatible with the other Vision Series Mounts and Plates.
|
294.30 |
|
|
Aurora LED Dome Light - White & Red Output - Flush Mount
LED replacement for the ubiquitous dome light provides bright, wide even light. The Aurora LED Dome Light has clean look, an intuitive and reliable switch, and a notable level of quality. Includes IP67 immersion protection with multiple color output options and dimming.
Features:
Dual-color with dimming
Built-in bezel switch
Completely sealed, IP67 Compliant
Easy 2-wire hook up
3-year warranty
|
97.96 |
|
|
Aurora LED Dome Light - White & Blue Output - Flush Mount
LED replacement for the ubiquitous dome light provides bright, wide even light. The Aurora LED Dome Light has clean look, an intuitive and reliable switch, and a notable level of quality. Includes IP67 immersion protection with multiple color output options and dimming.
Features:
Dual-color with dimming
Built-in bezel switch
Completely sealed, IP67 Compliant
Easy 2-wire hook up
3-year warranty
|
97.96 |
|
|
Z-30 Top Gun Outrigger Kit - 15'
Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing kits make it simple to have your boat ready to fish upon receipt. If your boat came "outrigger ready" with a Rupp outrigger mounting plate or similar plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.
This package comes complete with a pair of Z-30 Bolt-In Top Gun Radial bases, a pair of 15' Telescoping poles and a complete single line rigging kit with Klicker release clips.
Top Gun Telescoping Poles - 15' Pair
Our 15 foot telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping poles an obvious choice. Our telescoping poles are an ideal match for any of our Top Gun outrigger bases. Every part of these telescoping poles are fully serviceable, easy replaceable and made in the USA.
O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp outrigger bases.
Top Gun Bolt-In Z-30 Bases - Pair
An innovative advance in Top Gun engineering, Rupp's Z-30 gear drive system offers unmatched ease of operation for top mount outriggers. Simply turning the palm-size handle deploys and retrieves riggers smoothly and effortlessly with an outstanding 30 to 1 advantage. Z-30 Top Guns are engineered for durability with a high strength, forged aluminum body that protects cutting edge components. Now with anodized aluminum knob and other enhancements. Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and below top operation. Designed to accept Rupp Top Gun poles in 15' or 18'.
Top Gun Rigging Kit w/Klickers
Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.
|
2595.49 |
|
|
Z-30 Top Gun Outrigger Kit - 18'
Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing
kits make it simple to have your boat ready to fish upon receipt. If your
boat came "outrigger ready" with a Rupp outrigger mounting plate or similar
plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.
Top Gun Telescoping Poles - 18' Pair
Our 18 foot telescoping pole is comprised of three sections making it the
most rigid and durable telescoping pole on the market. Very little flex and
robust buttons make Rupp telescoping poles an obvious choice. Our
telescoping poles are an ideal match for any of our Top Gun outrigger bases.
Every part of these telescoping poles are fully serviceable, easy
replaceable and made in the USA.
O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp
outrigger bases.
Top Gun Bolt-In Z-30 Bases - Pair
An innovative advance in Top Gun engineering, Rupp's Z-30 gear drive system
offers unmatched ease of operation for top mount outriggers. Simply turning
the palm-size handle deploys and retrieves riggers smoothly and effortlessly
with an outstanding 30 to 1 advantage. Z-30 Top Guns are engineered for
durability with a high strength, forged aluminum body that protects cutting
edge components. Now with anodized aluminum knob and other enhancements.
Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and
below top operation. Designed to accept Rupp Top Gun poles in 15' or 18'.
Top Gun Rigging Kit w/Klickers
Complete rigging packages that allow you to run One (1) lines on each
rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This
rigging kit is for small outriggers, 20' and under.
|
2723.22 |
|
|
Classic Top Gun Outrigger Kit - 15'
Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing
kits make it simple to have your boat ready to fish upon receipt. If your
boat came "outrigger ready" with a Rupp outrigger mounting plate or similar
plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.
Top Gun Telescoping Poles - 15' Pair
Our 15 foot telescoping pole is comprised of three sections making it the
most rigid and durable telescoping pole on the market. Very little flex and
robust buttons make Rupp telescoping poles an obvious choice. Our
telescoping poles are an ideal match for any of our Top Gun outrigger bases.
Every part of these telescoping poles are fully serviceable, easy
replaceable and made in the USA.
O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp
outrigger bases.
Top Gun Bolt-In Radial Bases - Pair
Designed for T-Tops, half-towers and other aluminum structures, Top Guns set a new standard for convenience of operation. Easily put your riggers out
and bring them in while standing at the console.
Top Gun Rigging Kit w/Klickers
Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.
|
2380.93 |
|