MS-AM504 4-Channel Marine Amplifier - 500W  Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 500 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through RCA output enables linking of multiple amplifiers for enhanced system performance. 4 Channels - Capable of powering 4 speakers, a sub and a pair of speakers or 8 speakers in parallel (2 speakers per channel in parellel @ 2 Ohms). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MS-AM402 2 Channel Marine Amplifier - 400W  Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 400 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through the RCA output enables linking of multiple amplifiers for enhanced system performance. 2 Channels - Capable of powering 2 speakers, a sub (bridged) or 4 speakers in parallel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Apollo™ Monoblock & 4 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo Monoblock or 4 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 4.72" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NXL-X600.4D 4-Channel Marine Amplifier - 1600W The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package. The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.   Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters.  The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience. All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification. The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier. Features: Multiple channel input selector - 2 or 4 channel IPX6 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 4 Frequency Response - 10Hz - 20KHz 2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W 4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W 4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W Signal-to-Noise Ratio - >85dB Product Dimensions: (L x W x H) - 9.92" x 4.4" x 1.77" (252mm x 112mm x 45mm) *Sold as an Individual

R1 650.4 4-Channel Marine Amplifier The R1 650.4 marine-grade amplifier from Roswell, is everything a boat's audio system has always wanted. These stackable amplifiers utilize a 4-channel Class-D design that puts out 100 watts RMS per channel at 4Ω and is perfect for powering an R1 6.5″ marine speaker setup. Easily bridge and tune with the calibrated crossover controls. Because LEDs create lots of noise issues, this amp features differential RCA inputs for maximum noise rejection. The R1 650.4 is built with fully conformal-coated PCBs and nickel-plated marine-grade wire terminals to ensure their quality. Features: Ch 1-4 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 4-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 4 / 2Ω: 165W x 4  Bridged: 4Ω: 300W x 2 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Dimensions: Inches: 1.90 x 7.06 x 11.125 Centimeters: 4.83 x 17.94 x 28.26

ME70BT IPX6 4-Channel Marine Amplifier Features: Remote display keypad 4x45 Audio power out 100 Meter Bluetooth range Phone/Android charging USB music Player AUX input NMEA 2000® certified Multiple EQ preset options Backlit 3 line display with adjustable illumination This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Apollo™ 6 & 8 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo 6/8 channel marine amplifier.  Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 7.87" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MA754AM 4-Channel Amplifier - 75W The marine A754 4-channel amplifier delivers a powerful 75-watt RMS to each of the front and rear speakers in a boat. You can also bridge the amp to 2-channel mode to drive a couple of subs with a 200-watt RMS or 3-channel mode to drive both a pair of full-range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using a marine factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow users to dial in the perfect roll-off to best suit speaker placement and cabin acoustics. Features: Compact size High and low-level input Variable crossover and bass boost Low noise and distortion Input Level Control Full on-board protection   Phase Switch RBC wired remote Class D amp technology Turn-on mode General Specifications: 4-channel marine amplifier 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode) Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels Preamp and speaker-level inputs Preamp outputs Fuse rating 30A x 2 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier Dimensions (W x H x D) 320mm x 51.3mm x 180mm (12-5/8” x 2-1/16" x 7-1/8”) What’s in the Box: One marine A754 4-channel amplifier 4 Bare wire-to-RCA adapters Four 30A ATO fuses (2 installed, 2 spare) Two JBL stickers Owner's Manual 4 Mounting screws (M4 x 53mm) 1 logo badge

NXL-X1000.1D 1-Channel Marine Amplifier - 2000W The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package. The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.   Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters.  The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience. All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification. The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier. Features: Multiple channel input selector - 2 or 4 channel IPX6 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 1 Frequency Response - 10Hz - 250KHz 2 Ohm RMS Power (14.4V) Per Channel - 600W 4 Ohm RMS Power (14.4V) Per Channel - 350W Signal-to-Noise Ratio - >82dB Product Dimensions: (L x W x H) - 11.8" x 4.4" x 1.77" (302mm x 112mm x 45mm) *Sold as an Individual

NXL-X1200.5D 5-Channel Marine Amplifier - 2800W The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package. The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.   Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters.  The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience. All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification. The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier. Features: Multiple channel input selector - 2 or 4 channel IPX6 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 5 Frequency Response - 10Hz - 200KHz 2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W 4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W 4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W Signal-to-Noise Ratio - >85dB Product Dimensions: (L x W x H) - 12.67" x 4.4" x 1.77" (322mm x 112mm x 45mm) *Sold as an Individual

MA4505 5 Channel Marine Amplifier  Weather-resistant & high-performance marine amplifier The weather-resistant & high-performance JBL Marine amplifiers deliver impressive power from a compact chassis designed to withstand outdoor environments. Available with 4-channel and 5-channel outputs. JBL Marine amplifiers incorporate our latest amplifier topology that includes selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions, with power and performance to meet the needs of any outdoor audio system, JBL Marine amplifiers are the perfect match for all of your JBL marine products. Features: 1 amplifier Stainless steel mounting hardware Rubber inserts 4 High-level input adapters 3 spare fuses 2 2-color brand stickers Quick start guide WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4-Channel Marine Waterproof Amplifier - Class D Full-Range - 4 Ohms 200x4 RMS The NVY-T800.4D: a versatile 4-channel amplifier designed for high-quality audio reproduction and unbreakable durability. The NVY-T800.4D was designed to withstand the harshest elements: its IPX6 waterproof rating and UV/SALT/Fog Protection, paired with its surface mount component technology and direct harness design allows this amplifier to be installed anywhere easily without sacrificing space! Its wide range of protection features, including thermal protection, overload protection, short circuit output protection, and voltage input protection ensures the safety and longevity of the NVY-T800.4D. Equipped with selectable high-pass, low-pass, and flat crossover filters; the NVY-T800.4D allows you to customize your sound to your liking. This full-range amplifier covers ranges from 20Hz-20KHz and has a signal-to-noise ratio of >80dB for crisp and clear audio with minimal distortion. With a peak power output of 2400W and RMS power of 4 x 200W @ 4 ohms, 4 x 300W @ 2 ohms, and 2 x 600W @ 4-ohm bridge, the NVY-T800.4D is perfect for powering any speakers in your marine audio system. Be prepared for everything with the NVY-T800.4D! Features: IPX6 Waterproof Rating UV, Salt, and Fog protection High Power Output Full Range Amplifier Customizable Sound With Selectable Crossover Filters High-Quality Protection Features Durable design suitable for use in harsh environments Power Specifications: Total Watts (Peak): 2400W RMS Power @ 4 ohm: 4 x 200W RMS Power @ 2 ohm: 4 x 300W RMS Power @ 4 ohm Bridge: 2 x 600W Audio Specifications:  Frequency Response: 20Hz-20KHz Signal Noise Ratio: >80dB Efficiency @ 4ohm: 0.85 Damping Factor: >100 Input Impedance: 20Kohms Channel Separation: >55dB Total Harmonic Distortion (THD): 0.0005 Low-Level Input Range: 200mV-5V Selectable X-Over: HPF/LPF/FLAT X-Over Filter Range: 40Hz-3KHz Great For: Marine Audio Powersports Audio

R1 550.2 2-Channel Marine Amplifier Roswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals. Features: Ch 1-2 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 2-channel design Marine-grade durability 4 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology 2 Ohm Stable at 275 watts per channel     Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2 Bridged: 4Ω: 550W x 1 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Phase Control: 0-180º Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26

R1 900.6 6-Channel Marine Amplifier The R1 900.6 marine-grade amplifier from Roswell is everything a boat's audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering an R1 8″ and R1 6.5″ marine speaker setup.   This amp features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals. Features: Ch 1-6 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 6-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 6 / 2Ω: 165W x 6 Bridged: 4Ω: 300W x 3 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Dimensions: Inches: 1.90 x 7.06 x 13.67 / Centimeters: 4.83 x 17.94 x 34.74

RCA Cable - 4 Channel - 6' This RCA connector cables is designed to connect your Fusion stereo to your Fusion amplifier.  Features: Superior Noise Rejection - The directional, shielded twisted pair cable provides superior noise rejection, resulting in a cleaner, clearer, enhanced audio signal. Nickel-Plated Connectors - Designed to prevent corrosion, these gold-plated connectors will last season after season. Color-Coded Connectors - Avoid unnecessary installation issues with easily identifiable colored bands on the left and right connectors. Technical Specifications: Type - 4 Zone/4 Channel Length - 6' or 1.8 M Connector - Nickel-plated RCA *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.