|
8" JMPSW800 Subwoofer - 200W
Water resistant amplified subwoofer reproduces and projects low-pitch audio frequencies. Ported aluminum enclosure withstands the elements and enhances the low frequency output and rich sound quality of your stereo.
Features:
Slim design
Built-in amplification
Black anodized all aluminum enclosure
Mate-in-lock connectors for easy installation
Vertical and horizontal mounting provisions
Adjustable gain and crossover
Technical Specifications:
200 Watts Nominal Power
Max Power - 200W
Sensitivity - 79dB
Voice coil - 38 mm
Power System - 12 Vdc
Frequency - 60Hz-200Hz
Dimensions (W x H x D) - 13.6" x 10.4" x 2.9"
In the Box:
Marine subwoofer
Wiring harness
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
181.82 |
|
|
Speaker Spacer for Wet Sounds REVO 8 FA S4 - 8" Series Subwoofer - .25" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .25"
Edge - 1/16" Round
Outer Diameter - 8.89" or 226 mm
Bolt Hole Circle Diameter - 8" or 203 mm
Mounting Hole Diameter - 7.10" or 180 mm
Compatible With 8" REVO 8 FA S4 8:
REVO 8 FA S4-B and REVO 8 FA S4-W
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
30.00 |
|
|
Speaker Spacer for Wet Sounds REVO 8 FA S4 - 8" Series Subwoofer - .25" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .25"
Edge - 1/16" Round
Outer Diameter - 8.89" or 226 mm
Bolt Hole Circle Diameter - 8" or 203 mm
Mounting Hole Diameter - 7.10" or 180 mm
Compatible With 8" REVO 8 FA S4 8:
REVO 8 FA S4-B and REVO 8 FA S4-W
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
30.00 |
|
|
Speaker Spacer for Wet Sounds REVO 8 FA S4 - 8" Series Subwoofer - .75" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .75"
Edge - 1/16" Round
Outer Diameter - 8.89" or 226 mm
Bolt Hole Circle Diameter - 8" or 203 mm
Mounting Hole Diameter - 7.10" or 180 mm
Compatible With 8" REVO 8 FA S4 8:
REVO 8 FA S4-B and REVO 8 FA S4-W
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
44.40 |
|
|
Groco 1/8 Square Key 1/8 Square Key
|
3.51 |
|
|
Groco 037-075-8 Lip Shaft Seal, 3/8"
|
6.14 |
|
|
|
12.29 |
|
|
|
15.80 |
|
|
Groco 8-R Gasket Set Of 2
|
16.67 |
|
|
|
161.40 |
|
|
March 1A-MD 3/8 Mag Drive Pump
March Pump's industrial 1A-MD-3/8 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-3/8 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 3/8 inch smooth, and the outlet is 3/8 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-3/8 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals.
Perfect for Applications Including
Applications for the 1A-MD-3/8 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The 1A-MD-3/8 may have been modified to handle these chemicals.
Type: Centrifugal Mag Drive
Inlet: 3/8"OD
Outlet: 3/8"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution, Epoxy, Noryl, SJT Cord
|
319.80 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0300
|
227.18 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
|
205.73 |
|
|
Shurflo 8-566-00 1/2 Memory Ring
|
0.19 |
|
|
Bosworth 74 1 1/8" Check Valve
Bosworth Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/8" Smooth Hose Ports
|
16.31 |
|