Apollo Marine 6 Channel 1800-Watt Amplifier This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating Less distortion and noise, so you enjoy quality audio Mounting brackets are included for simple installation Don’t worry about potential overheating damage with our ignition protection design Power & Efficiency The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel. Easy Tune Feature These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments. Less Distortion  Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. LED Indicators  Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature. Mounting Brackets  Easily install the amplifiers on board with the included mounting brackets. Ignition Protected  The ignition-protected design helps prevent potential damage from overheating. Conformal-Coated PCBS The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. 2 OHM Stable  Connect up to two speakers per channel, increasing setup options. Fusion True-Marine Design  The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV. In the Box: One Apollo 6-channel amplifier One mounting bracket One power connector Three speaker connectors with high-power mode adapters Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Fuse holder Mounting template Installation instructions ISPI Specifications: Physical Dimensions without Bracket (L x W x H): 11.69" x 7.06" x 1.75" (297 x 180 x 45 mm) Physical Dimensions with Bracket (L x W x H): 11.69" x 7.06" x 2.13" (297 x 180 x 50 mm) Weight: 5.95 lb (2.7 kg) Water Rating: IPX2 Amplifier Class: Class-D CEA-2006 Power Rating: 150 watt RMS x 6 @ 14.4 V input - 4 ohm < 1% THD Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 6 @ 14.4 V input - 2 ohm < 1% THD Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 3 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak Power (watts): 1800 watts Input Sensitivity: 1.6 V RMS Input Impedance: 22k ohm Operating Voltage: 10.8 V - 16 V DC Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input Current Draw, On, No Audio: < 1.32 A @ 14.4 V input Fuse Rating: 125 A electronic fuse (no replacement necessary) Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting Ignition Safety Protected (SAE J1171): Yes Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit Operating temperature range: 32° to 122° F (0° to 50° C) Warranty: 3 years

Apollo Marine 8 Channel 2400-Watt Amplifier This 8-channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power. Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating Less distortion and noise, so you enjoy quality audio Mounting brackets are included for simple installation Don’t worry about potential overheating damage with our ignition protection design Power & Efficiency The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel. Easy Tune Feature These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments. Less Distortion  Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. LED Indicators  Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature. Mounting Brackets  Easily install the amplifiers on board with the included mounting brackets. Ignition Protected  The ignition-protected design helps prevent potential damage from overheating. Conformal-Coated PCBS The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. 2 OHM Stable  Connect up to two speakers per channel, increasing setup options. Fusion True-Marine Design  The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV. In the Box: One Apollo 8-channel amplifier One mounting bracket One power connector Four speaker connectors with high-power mode adapters Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Fuse holder Mounting template Installation instructions ISPI Specifications: Physical Dimensions without Bracket (L x W x H): 14.13" x 7.06" x 1.75" (359 x 180 x 45 mm) Physical Dimensions with Bracket (L x W x H): 14.13" x 7.06" x 2.13" (359 x 180 x 50 mm) Weight: 6.94 lb (3.15 kg) Water Rating: IPX2 Amplifier Class: Class-D CEA-2006 Power Rating: 150 watt RMS x 8 @ 14.4 V input - 4 ohm < 1% THD Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 8 @ 14.4 V input - 2 ohm < 1% THD Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 4 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak Power (watts): 2400 watts Input Sensitivity: 1.6 V RMS Input Impedance: 22k ohm Operating Voltage: 10.8 V - 16 V DC Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input Current Draw, On, No Audio: < 1.60 A @ 14.4 V input Fuse Rating: 125 A electronic fuse (no replacement necessary) Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting Ignition Safety Protected (SAE J1171): Yes Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit Operating temperature range: 32° to 122° F (0° to 50° C) Warranty: 3 years

Apollo Marine 4 Channel 1200-Watt Amplifier This 4-channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating Less distortion and noise, so you enjoy quality audio Mounting brackets are included for simple installation Don’t worry about potential overheating damage with our ignition protection design Power & Efficiency The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel. Easy Tune Feature These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments. Less Distortion  Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. LED Indicators  Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature. Mounting Brackets  Easily install the amplifiers on board with the included mounting brackets. Ignition Protected  The ignition-protected design helps prevent potential damage from overheating. Conformal-Coated PCBS The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. 2 OHM Stable  Connect up to two speakers per channel, increasing setup options. Fusion True-Marine Design  The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV. In the Box: One Apollo 4-channel amplifier One mounting bracket One power connector Two speaker connectors with high-power mode adapters Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Fuse holder Mounting template Installation instructions ISPI Specifications: Physical Dimensions without Bracket (L x W x H): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm) Physical Dimensions with Bracket (L x W x H): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm) Weight: 4.85 lb (2.2 kg) Water Rating: IPX2 Amplifier Class: Class-D CEA-2006 Power Rating: 150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak Power (watts): 1200 watts Input Sensitivity: 1.6 V RMS Input Impedance: 22k ohm Operating Voltage: 10.8 V - 16 V DC Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input Current Draw, On, No Audio: < 1.15 A @ 14.4 V input Fuse Rating: 85 A electronic fuse (no replacement necessary) Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting Ignition Safety Protected (SAE J1171): Yes Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit Operating temperature range: 32° to 122° F (0° to 50° C) Warranty: 3 years

SG-24DA61500 Signature Series 1500W - 6 Channel Amplifier - 24V The Signature Series 24-volt 6-channel marine amplifier is designed for boats operating on 24-volt electrical systems. With a peak power of 1500-watts, it provides incredible power delivery to your onboard audio entertainment. The plug-and-play setup allows for easy installation without the need for an additional power adaptor. Fusion Signature Series amplifiers are purpose-built for the marine environment. Boasting some of the most impressive environmental protection available, they deliver a Signature performance on the water like never before. Features: Class-D Amplifier Technology:  The highly efficient Class-D design provides 1500-watt peak power while drawing less current than a standard Class-AB amplifier.  This design provides increased efficiency and power output to your speakers and subwoofers, letting you enjoy your music for longer without needing to worry about battery drain. 1500-Watt Peak Power:  With a peak power of 1500-watts, you can easily power up to 6 pairs of speakers OR up to 4 pairs of speakers and 1 subwoofer. Marine-Ready Design with Conformal Coated PCBs:  Extending the life of your amplifiers, the Signature Series amplifiers are designed specifically for marine use with conformal coated PCBs to provide extra protection from the marine elements. Rigid Aluminum Alloy Heat Sink:  Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation. Stainless Steel Mirror Finish:  The polished stainless steel control panel cover conceals and helps protect all cable connections and the settings control panel while providing an attractive finish to complement any installation. Speaker Configuration:  Whether you require 2 ohms per channel or 4 ohms bridged, the Signature Series amplifier has your installation options covered to achieve optimum output levels. Connect up to 2 speakers per channel (2 x 4 ohm speakers in parallel) with the SG-24DA61500. Zone Designation:  To align with the Fusion Entertainment System Zone philosophy, the input and output connections are labeled as zones. Technical Specifications: Frequency Response : 10 Hz to 40 kHz (-3dB @ 4 Ohm rated power) Peak Power Output:  1500 W Rated Power Output (4 Ohm):  100 W rms x 6 @ 28.8 V input < 1% THD + N (EIA/CEA-490A) Rated Power Output (2 Ohm):  140 W rms x 6 @ 28.8 V input < 1% THD + N (EIA/CEA-490A) Rated Power Output (4 Ohm Bridged): 280 W rms x 3 @ 28.8 V input < 1% THD + N (EIA/CEA-490A) Input Sensitivity:  0.3 V to 8 V rms, user adjustable Input Impedance:  7k Ohm nominal High-Pass/Low-Pass Full Range Filter:  Yes, user selectable Filter Cross-Over Frequency:  32 Hz to 320 Hz, user adjustable Bass-Boost:  0 to 9 dB, user adjustable (zone 3 only) Operating Voltage:  21.6 V to 32 V dc Remote Switch-On:  Yes - 6 V threshold Current Consumption (Standby): < 1 mA @ 28.8 V input Current Consumption (Idle):  < 1.25 A @ 28.8 V input Current Consumption (Max):  35 A @ 28.8 V input Fuse Rating:  3 x 20 A ATC Blade-Type (SAE J1171 Compliant) Protection Circuits:  Reverse-Voltage, Input Under/Over Voltage, Over-Temperature, Output Short-Circuit Operating Temperature Range:  0 to 50°C (32 to 122°F) Ingress Protection Rating:  Dry area installation only Dimensions:  420 mm (L) x 210 mm (W) x 57 mm (H) or 16-9-16" (L) x 8-1/4" (W) x 2-1/4" (H) Weight:  5.15 kg or 11.35 lb with cover Warranty:  3 years In the Box: Four 8-gauge, self-tapping screws 3 mm hex key (for the top cover and power terminals) 2.5 mm hex key (for the speaker terminals) Polishing cloth Spare J1171 compliant 20 A blade-type fuses (only included with 24-Volt Signature Series 6 Channel 1500-Watt amplifier) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush/Surface Mount 6-Channel Class D Amplifier with Acrylic Cover - 6x180W RMS @ 4 Ohm Enhance your car audio system with DS18’s FX6! Designed and manufactured for professional car audio applications, this amplifier delivers exceptional power and high-quality sound while maintaining a small footprint for easy installation. What sets the FX Series apart is its versatile installation options. Unlike ordinary amplifiers, these amplifiers come equipped with a surface mount adapter, allowing for both flush and surface installation. This feature provides flexibility in positioning the amplifier, making it perfect for custom car audio builds. Not only does it guarantee optimal performance without compromising on space or aesthetics, but it also incorporates mesmerizing Digital LED lights that add a touch of style and flair to your car audio setup. Let's talk power! DS18’s FX6 delivers an impressive MAX power of 4500W. With RMS power outputs of 6 x 180W at 4 ohms, 6 x 250W at 2 ohms, and 3 x 500W at 4 ohms bridge, you can expect nothing less than thunderous sound quality. In addition to its impressive power capabilities, this amplifier also offers a wide range of audio features. With a frequency response of 20Hz-20KHz, a signal-to-noise ratio of 80dB, and a damping factor of 80, you can enjoy a full spectrum of sound with exceptional clarity. The selectable X-Over feature allows you to customize your audio experience, while the bass boost range and frequency allow you to fine-tune your system to your liking. Upgrade your car audio system with DS18’s FX6 and experience unmatched power, versatility, and sound quality! *The FX Series adapters are not designed to be water-resistant. Please exercise caution to prevent water contact with the RGB LEDs, as exposure may result in a short circuit* Features: 6 Channel Full Range Flush Mount / Surface Mount 6 X 180 Watts RMS @ 4 Ohm CLASS D  RGB Dream LED Lights Built-in Crossover / Water Resistant Technical Specifications: Number of Channels - 6 Frequency Response - 20Hz-20kHZ  4 Ohm RMS Power - 6x180W 2 Ohm RMS Power - 6x250W Signal-to-Noise Ratio - >80dB  Product Dimensions - 14.25"L x 4.7"W x 1.85"H

FUSION Apollo™ amplifiers are the difference between hearing the music and feeling it. They are efficient, easy-to-install, and work with your compatible FUSION stereo system. The compact zone amplifier provides audio zone expansion for high-quality sound in more zones onboard your boat. The monoblock and multichannel amplifiers add extra power to your system. They all use less power, so you can listen to music longer with less drain on your battery. Plus, the Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments. Know about electrical or temperature issues with just a glance at the amplifier’s LED indicators. The included mounting brackets make this amplifier easy to install and ideal for your setup.       The Following FUSION Apollo™ Amplifiers Are Now Available:     2000-WATT MONOBLOCK AMPLIFIER: Add extra power to your system with this 2000-watt (650-watt RMS at 4 ohms) monoblock amplifier that’s specifically designed to power a subwoofer.     1200-WATT 4 CHANNEL AMPLIFIER: This 4 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.     1800-WATT 6 CHANNEL AMPLIFIER: This 6 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.     2400-WATT 8 CHANNEL AMPLIFIER: This 8 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power.   140-WATT ZONE AMPLIFIER: The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.       Specials    Closeouts    Remanufactured    Rebates

Apollo™ Marine Zone Amplifier - 140W Amplify the moment with an Apollo™ marine amplifier – designed specifically for use with your Fusion DSP-enabled marine stereo and Fusion speakers. This efficient zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. With 20-watt RMS per channel (at 4 ohms), this 2 channel amplifier allows you to add an extra pair of speakers on board.  The Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments (Requires setup using the Fusion-Link™ app on a compatible smartphone). Fusion Apollo AP-DA214 Features: RMS Power - 20-watt RMS per channel (at 4 ohms), allowing you to add an extra pair of speakers on board. Efficient Class-D Design - Uses less power, so you can listen to music for longer at higher volumes, with less drain on the battery. Easy Tune Feature - Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (Requires setup using the Fusion-Link app on a compatible smartphone). Compact Design - The compact size of the zone amplifier makes it a versatile option for mounting on board. LED Indicator - Show issues with electrical currents and shorts as well as temperature. Less Total Harmonic Distortion - The amplifier is designed with minimal distortion and noise, allowing for better quality audio. Ignition Protected - Intelligent electronic fuse prevents damage from over/under current, temperature, output short, and other faults. Conformal Coated PCBs - The amplifier circuit board has been specially coated to provide enhanced protection from the marine elements. Powder Coated Aluminum Finish - Salt fog, temperature, vibration, and UV tested with a modern aesthetic design to add style to your boat. Easy Installation - A mounting bracket is included in the box allowing you to simply clip the amplifier in place for a clean finish. 12- and 24-Volt Compatible - The zone amplifier is designed to work with both 12- and 24-volt electrical systems. True-Marine™ Design - Designed to withstand the harshest marine environments season after season, the zone amplifier is IPX7 rated and comes with a 3-year warranty. Technical Specifications: Peak Power - 140 Watts Power at 4 ohm - 20 Watt RMS Power at 2 ohm - 30 Watt RMS Operating Voltage - 10.8 to 32 VDC Class D Amplifier Water Rating - IPX7 Dimensions with bracket (W x H x D) - 3.94" x 4.53" x 1.89" Dimensions without bracket (W x H x D) - 3.94" x 3.94" x 1.57" Weight - 1.01 pounds In the Box: One Apollo zone amplifier One mounting bracket Three 6-gauge, self-tapping screws Wiring loom Installation instructions Important safety and product information (ISPI) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Apollo™ Monoblock & 4 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo Monoblock or 4 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 4.72" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Apollo Monoblock Marine 650-Watt RMS Amplifier Add extra power to a system with this 2000-watt (650-watt RMS) monoblock amplifier that’s specifically designed to power a subwoofer. This efficient, easy-to-install monoblock amplifier works with your compatible Fusion stereo system. Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating Less distortion and noise, so you enjoy quality audio Mounting brackets are included for simple installation Don’t worry about potential overheating damage with our ignition protection design Power & Efficiency The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS. Easy Tune Feature These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments. Less Distortion  Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. LED Indicators  Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature. Mounting Brackets  Easily install the amplifiers on board with the included mounting brackets. Ignition Protected  The ignition-protected design helps prevent potential damage from overheating. Conformal-Coated PCBS The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. 2 OHM Stable  Connect up to two speakers per channel, increasing setup options. Fusion True-Marine Design  The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV. In the Box: One Apollo monoblock amplifier One mounting bracket One power connector One speaker connector Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Fuse holder Mounting template Installation instructions Important safety and product information (ISPI) Specifications: Physical Dimensions without Bracket (L x W x H): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm) Physical Dimensions with Bracket (L x W x H): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm) Weight: 4.85 lb (2.2 kg) Water Rating: IPX2 Amplifier Class: Class-D CEA-2006 Power Rating: 650 watts RMS x 1 @ 14.4 V input, 4 ohms,  < 1% THD Total Rated Power Output, 2 Ohm (Watts): 1100 watts RMS x 1 @ 14.4 V input, 2 ohm < 1% THD Peak Power (watts): 2000 watts Input Sensitivity: 2.15 V RMS Input Impedance: 22k ohm Operating Voltage: 10.8 V - 16 V DC Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input Current Draw, On, No Audio: < 1.15 A @ 14.4 V input Fuse Rating: 125 A electronic fuse (no replacement necessary) Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting Ignition Safety Protected (SAE J1171): Yes Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit Operating temperature range: 32° to 122° F (0° to 50° C) Warranty: 3 years

Apollo MS-SRX400 Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion’s MS-SRX400 Stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion Apollo MS-SRX400 Stereo with AM/FM/BT - Single Zone w/DSP If you want to build a cutting-edge multi-zone audio system on your boat, Fusion's Apollo Series has everything you need. Start with a Fusion MS-RA770 or MS-RA670 touchscreen marine receiver, then add one or more of these MS-SRX400 zone receivers in other zones on your boat. You can sync up all the music on the boat with Fusion's PartyBus™ feature, or use each MS-SRX400 as an individual entertainment source.  You can use its built-in amp to power stereo speakers in your zone, or use the preamp outputs to add amps to power the speakers and a subwoofer. Digital Signal Processing (DSP)  A technically superior listening experience made simple, Fusion's DSP produces superior sound quality in every environment. Precisely calculated loudness curves optimized for the human ear ensure quality, and a full range of audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, a thing of the past. Using environmental information and acoustically designed Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season. PartyBus™ Network  Enjoy the freedom of musical choice with the Apollo Series and Fusion's PartyBus-Network. We have introduced a new intuitive user experience allowing for easy navigation of your entire boat's audio network, making control of your audio and sources a seamless experience.  Key functionalities include - Stereo grouping, volume control, power options, and home zone technology. Wi-Fi Audio Streaming  In the marine industry, high-quality on-board audio streaming is now available via Wi-Fi with the Apollo Series.  Wi-Fi streaming provides a higher data transfer rate in comparison with Bluetooth, for higher-quality audio reproduction.  Enjoy perfectly synced music throughout your vessel by wirelessly connecting multiple stereos via a PartyBus-Network. Fusion-Link™  Makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports, or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld, or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.   Over-The-Air Software Updates  Over-the-air software updates are available from your smartphone or compatible device via the free Fusion-Link app. Features: Marine digital media receiver with built-in Wi-Fi and Bluetooth 2.7" LCD color display Advanced Fusion DSP optimizes sound quality at all listening levels Works with iPod/iPhone, plus Android and Windows phones Class D amplifier technology conserves battery power PartyBus audio distribution technology Technical Specifications: 1 Zone 140 Watts peak power Class D Amplifier Language Interface - English, French, German, Spanish, Dutch, Italian  Dimensions (L/H/D) -  4-5/16" x 2-3/4" x 7/8"  Cutout Dimensions (H/D) - 2" x 3.9" In the Box: Stereo Head Unit Mounting Hardware Mounting Template Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts. Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately). Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement. Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs. Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

Apollo MS-RA670 Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion’s Apollo MS-RA670 Stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion Apollo MS-RA670 Stereo with AM/FM/BT/SiriusXM - 3 Zone with DSP The Apollo RA670 inherits key audio innovations and revolutionary technology from the award-winning Apollo RA770 including Fusion's Digital Signal Processing, enhanced PartyBus-Network capabilities, Wi-Fi audio streaming with Apple AirPlay® 2, over-the-air software updates, and more source options including Optical Audio for connection to TVs in salons and cabins.  From the kick drum to the eardrum, Apollo has made it inherently simple to customize your audio entertainment for superior sound quality in any area of your boat.  The future of marine audio entertainment has arrived. Digital Signal Processing (DSP)  A technically superior listening experience made simple, Fusion's DSP produces superior sound quality in every environment.  Precisely calculated loudness curves optimized for the human ear ensure quality, full range audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, a thing of the past.  Using environmental information and acoustically designed Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season. PartyBus™ Network   Enjoy the freedom of musical choice with the Apollo Series and Fusion's PartyBus-Network. We have introduced a new intuitive user experience allowing for easy navigation of your entire boat's audio network, taking control of your audio and sources a seamless experience.  Key functionalities include - Stereo grouping, volume control, power options, and home zone technology. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-RA670 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-RA670 with a supported chartplotter or fishfinder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the MS-RA670 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones. Fusion-Link™  Makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports, or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld, or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.  The Apollo Series is intelligently simple and always up to date, thanks to the over-the-air software updates available from your smartphone or compatible device via the free Fusion-Link app. Multi-Zone Control  With three independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Over-The-Air Software Updates  Over-the-air software updates are available from your smartphone or compatible device via the free Fusion-Link app. Features: Marine digital media receiver with built-in Wi-Fi and Bluetooth 2.7" LCD color display Advanced Fusion DSP optimizes sound quality at all listening levels Multi-zone control lets you tune three audio zones Works with iPod/iPhone, plus Android and Windows phones Class D amplifier technology conserves battery power PartyBus audio distribution technology (requires Fusion MS-SRX400 zone stereos) Technical Specifications: 3 Zones 280 Watts peak power One ethernet port NMEA 2000 compatible  Class D Amplifier Rear USB connection Bluetooth wireless range - 30' ANT wireless range - 10' Language Interface - Bulgarian / Chinese (Simplified) / Chinese (Traditional) / Croatian / Czech / Danish / Dutch / English / Finnish / French / German / Greek / Italian / Japanese / Korean / Norwegian / Polish / Portuguese (BR) / Portuguese (PT) / Slovenian / Spanish / Swedish / Thai / Turkish  Dimensions (W/H/D) - 6-3/16" x 2-11/16" x 4-7/8"  Cutout Dimensions (W/H/D) - 5-5/16" x 2-1/16" x 4-1/8" In the Box: Stereo Head Unit Cover 6' NMEA 2000 Drop Cable Mounting Hardware Mounting Template Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately) Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

Apollo MS-RA770 Touchscreen AM/FM/BT/SiriusXM Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion’s MS-RA770 stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion Apollo MS-RA770 Touchscreen AM/FM/BT/SiriusXM Stereo - 4 Zone with DSP The world’s first touchscreen marine stereo with Apple AirPlay 2 and built-in Wi-Fi, the Apollo RA770 has redefined audio excellence with revolutionary technology and innovative design including Fusion’s Digital Signal Processing, enhanced PartyBus-Network capabilities, over-the-air software updates, a one-piece glass display and more source options than ever before, including advanced SiriusXM features.  From the kick drum to the eardrum, Apollo has made it inherently simple to customize your audio entertainment for superior sound quality in any area of your boat.   Built on the True-Marine design philosophy from Fusion®, the Apollo RA770 stereo has an IPX6- and IPX7-rated water-resistant front panel and has been tested to a high level of protection against salt fog, temperature, vibration, and UV. Digital Signal Processing (DSP)   A technically superior listening experience made simple, Fusion's DSP produces superior sound quality in every environment.  Precisely calculated loudness curves optimized for the human ear ensure quality, full-range audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, a thing of the past.  Using environmental information and acoustically designed Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season. PartyBus™ Network   Enjoy the freedom of musical choice with the Apollo Series and Fusion's PartyBus-Network. We have introduced a new intuitive user experience allowing for easy navigation of your entire boat's audio network, taking control of your audio and sources a seamless experience.  Key functionalities include - Stereo grouping, volume control, power options, and home zone technology. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-RA770 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-RA770 with a supported chartplotter or fishfinder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the MS-RA770 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones. Fusion-Link™   Makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports, or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld, or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.  The Apollo Series is intelligently simple and always up to date, thanks to the over-the-air software updates available from your smartphone or compatible device via the free Fusion-Link app. Multi-Zone Control  With four independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Over-The-Air Software Updates  Over-the-air software updates are available from your smartphone or compatible device via the free Fusion-Link app. Features: Touchscreen technology Marine digital media receiver with built-in Wi-Fi and Bluetooth 4.3" capacitive touch glass LCD color display Advanced Fusion DSP optimizes sound quality at all listening levels Multi-zone control lets you tune four audio zones Works with iPod/iPhone, plus Android and Windows phones Class D amplifier technology conserves battery power PartyBus audio distribution technology (requires Fusion MS-SRX400 zone stereos) Technical Specifications: 4 Zones 280 Watts peak power One ethernet port NMEA 2000 compatible  Bluetooth wireless range - 30' ANT wireless range - 10' Class D Amplifier Rear USB connection DAB+ Ready Language Interface -Bulgarian / Chinese (Simplified) / Chinese (Traditional) / Croatian / Czech / Danish / Dutch / English / Finnish / French / German / Greek / Italian / Japanese / Korean / Norwegian / Polish / Portuguese (BR) / Portuguese (PT) / Slovenian / Spanish / Swedish / Thai / Turkish  Dimensions (H/W/D) - 3.23" x 7.56" x 4.7"  Cutout Dimensions (H/W/D) - 2.08" x 6.53" x 4.15" In the Box: Stereo Head Unit Cover 6' NMEA 2000 Drop Cable Mounting Hardware Mounting Template Power Wiring Harness Aux/Line-out Harness Documentation SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately) Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

SG-DA61500 Signature Series 1500W - 6 Channel Amp Bring your music to life with our range of powerful Signature Series amplifiers, designed to enhance any serious on-board audio system. CLASS-D AMPLIFIER TECHNOLOGY The highly efficient Class-D amplifier design ensures low current draw from the battery whilst delivering increased power to the connected speakers and/or subwoofers. Taking your audio entertainment experience to a whole new level, the Signature Series amplifiers are built for high performance. RIGID ALUMINIUM ALLOY HEAT SINK Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink. This creates greater dissipation of heat and unquestionable efficiency without compromising the sleek form factor. MARINE READY DESIGN The Signature Series amplifiers are designed specifically for marine use, with conformal coated PCBs to provide extra protection from the marine elements. This extends the products’ lives and ensures that the amplifiers will continue to perform season after season on board. STAINLESS MIRROR FINISH The stunning stainless steel cover conceals all cable connections and tuning controls for a discreet yet undeniably attractive finish that will complement any installation. The stainless steel design also ensures that your Signature Series amplifier will resist rust and corrosion, extending the product life while maintaining a clean, tidy appearance. TRUE-MARINE™ PHILOSOPHY Fusion’s True-Marine design philosophy stems from our experience confronting the harsh marine environment. By designing and engineering from the ground up specifically for real world boating applications, our customers are assured that the equipment they fit into their vessel will deliver quality entertainment season after season. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Golf Cart Package with 6.5" Black Speakers, Amplifier, Amp Kit & Bluetooth Remote  Upgrade your golf cart to capture the sound of music while on the front 9 of any course or just cruising around.  If streaming music is on your mind, then this DS18 Bluetooth package will add connectivity to your golf cart with the user-friendly BTRC-SQ Bluetooth Audio Receiver.  This unit will send out signals to your amplifiers and give you control over the music being played via Bluetooth. The MP6 2-Way Marine Speaker is the newest arrival to the MP series of marine speakers.  These speakers come in 2-way configurations and have an IPX5 Waterproof Rating so this product is built to endure all the elements out on the course.  You can get the complete sound you crave on-demand with these speakers. Also included is the SELECT 2 Channel amplifier, a compact and powerful (1800 Watts Max) amplifier that’s perfect for any golf cart audio system.  This amplifier is designed for people who want a very small audio footprint, while also having the benefits of a huge amplifier putting out lots of power in a small package. We’ll make sure you have everything you need to easily hook up your amplifier with an installation kit.  DS18 kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations. Features: Bluetooth connectivity via Android and iPhone High-quality sound Easy to install and use Small equipment footprint Waterproof speakers for complete protection and longevity Technical Specifications: Speaker Maximum Power - 180W Speaker RMS Power - 60W Speaker Dimensions (Diameter x Depth) - 7.16" x 3.8" (18.2 x 9.7 cm) Amplifier Power - 1800W Amplifier Channels - Two (2) Amplifier Dimensions (L x W x D) - 7.4" x 5.83" x 1.87" (18.8 x 14.8 x 4.75 cm) Bluetooth Wire Length - 4' (1.22 M) Bluetooth Audio Receiver - AUX input and USB port Bluetooth Dimensions (L x Depth x H)  - 3.81" x 1.47" x 2.19" (9.7 x 3.74 x 5.58 cm)  In the Box: 1 x Pair of MP6 6.5" Speakers - Black 1 x SELECT 2 Channel Amplifier 1 x BTRC-SQ Audio Receiver 1 x AMPKIT8 Installation Kit *Sold as an Individual

Golf Cart Package with 6.5" White Speakers, Amplifier, Amp Kit & Bluetooth Remote  Upgrade your golf cart to capture the sound of music while on the front 9 of any course or just cruising around.  If streaming music is on your mind, then this DS18 Bluetooth package will add connectivity to your golf cart with the user-friendly BTRC-SQ Bluetooth Audio Receiver.  This unit will send out signals to your amplifiers and give you control over the music being played via Bluetooth. The MP6 2-Way Marine Speaker is the newest arrival to the MP series of marine speakers.  These speakers come in 2-way configurations and have an IPX5 Waterproof Rating so this product is built to endure all the elements out on the course.  You can get the complete sound you crave on-demand with these speakers. Also included is the SELECT 2 Channel amplifier, a compact and powerful (1800 Watts Max) amplifier that’s perfect for any golf cart audio system.  This amplifier is designed for people who want a very small audio footprint, while also having the benefits of a huge amplifier putting out lots of power in a small package. We’ll make sure you have everything you need to easily hook up your amplifier with an installation kit.  DS18 kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations. Features: Bluetooth connectivity via Android and iPhone High-quality sound Easy to install and use Small equipment footprint Waterproof speakers for complete protection and longevity Technical Specifications: Speaker Maximum Power - 180W Speaker RMS Power - 60W Speaker Dimensions (Diameter x Depth) - 7.16" x 3.8" (18.2 x 9.7 cm) Amplifier Power - 1800W Amplifier Channels - Two (2) Amplifier Dimensions (L x W x D) - 7.4" x 5.83" x 1.87" (18.8 x 14.8 x 4.75 cm) Bluetooth Wire Length - 4' (1.22 M) Bluetooth Audio Receiver - AUX input and USB port Bluetooth Dimensions (L x Depth x H)  - 3.81" x 1.47" x 2.19" (9.7 x 3.74 x 5.58 cm)  In the Box: 1 x Pair of MP6 6.5" Speakers - White 1 x SELECT 2 Channel Amplifier 1 x BTRC-SQ Audio Receiver 1 x AMPKIT8 Installation Kit *Sold as an Individual