Apollo Marine 4 Channel 1200-Watt Amplifier This 4-channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating Less distortion and noise, so you enjoy quality audio Mounting brackets are included for simple installation Don’t worry about potential overheating damage with our ignition protection design Power & Efficiency The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel. Easy Tune Feature These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments. Less Distortion  Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. LED Indicators  Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature. Mounting Brackets  Easily install the amplifiers on board with the included mounting brackets. Ignition Protected  The ignition-protected design helps prevent potential damage from overheating. Conformal-Coated PCBS The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. 2 OHM Stable  Connect up to two speakers per channel, increasing setup options. Fusion True-Marine Design  The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV. In the Box: One Apollo 4-channel amplifier One mounting bracket One power connector Two speaker connectors with high-power mode adapters Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Fuse holder Mounting template Installation instructions ISPI Specifications: Physical Dimensions without Bracket (L x W x H): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm) Physical Dimensions with Bracket (L x W x H): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm) Weight: 4.85 lb (2.2 kg) Water Rating: IPX2 Amplifier Class: Class-D CEA-2006 Power Rating: 150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak Power (watts): 1200 watts Input Sensitivity: 1.6 V RMS Input Impedance: 22k ohm Operating Voltage: 10.8 V - 16 V DC Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input Current Draw, On, No Audio: < 1.15 A @ 14.4 V input Fuse Rating: 85 A electronic fuse (no replacement necessary) Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting Ignition Safety Protected (SAE J1171): Yes Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit Operating temperature range: 32° to 122° F (0° to 50° C) Warranty: 3 years

Apollo Marine 8 Channel 2400-Watt Amplifier This 8-channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power. Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating Less distortion and noise, so you enjoy quality audio Mounting brackets are included for simple installation Don’t worry about potential overheating damage with our ignition protection design Power & Efficiency The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel. Easy Tune Feature These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments. Less Distortion  Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. LED Indicators  Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature. Mounting Brackets  Easily install the amplifiers on board with the included mounting brackets. Ignition Protected  The ignition-protected design helps prevent potential damage from overheating. Conformal-Coated PCBS The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. 2 OHM Stable  Connect up to two speakers per channel, increasing setup options. Fusion True-Marine Design  The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV. In the Box: One Apollo 8-channel amplifier One mounting bracket One power connector Four speaker connectors with high-power mode adapters Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Fuse holder Mounting template Installation instructions ISPI Specifications: Physical Dimensions without Bracket (L x W x H): 14.13" x 7.06" x 1.75" (359 x 180 x 45 mm) Physical Dimensions with Bracket (L x W x H): 14.13" x 7.06" x 2.13" (359 x 180 x 50 mm) Weight: 6.94 lb (3.15 kg) Water Rating: IPX2 Amplifier Class: Class-D CEA-2006 Power Rating: 150 watt RMS x 8 @ 14.4 V input - 4 ohm < 1% THD Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 8 @ 14.4 V input - 2 ohm < 1% THD Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 4 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak Power (watts): 2400 watts Input Sensitivity: 1.6 V RMS Input Impedance: 22k ohm Operating Voltage: 10.8 V - 16 V DC Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input Current Draw, On, No Audio: < 1.60 A @ 14.4 V input Fuse Rating: 125 A electronic fuse (no replacement necessary) Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting Ignition Safety Protected (SAE J1171): Yes Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit Operating temperature range: 32° to 122° F (0° to 50° C) Warranty: 3 years

Apollo Marine 6 Channel 1800-Watt Amplifier This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating Less distortion and noise, so you enjoy quality audio Mounting brackets are included for simple installation Don’t worry about potential overheating damage with our ignition protection design Power & Efficiency The Apollo amplifiers are designed to produce impressive power with less drain on your battery. This amp produces 150-watt RMS per channel. Easy Tune Feature These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments. Less Distortion  Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. LED Indicators  Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature. Mounting Brackets  Easily install the amplifiers on board with the included mounting brackets. Ignition Protected  The ignition-protected design helps prevent potential damage from overheating. Conformal-Coated PCBS The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. 2 OHM Stable  Connect up to two speakers per channel, increasing setup options. Fusion True-Marine Design  The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV. In the Box: One Apollo 6-channel amplifier One mounting bracket One power connector Three speaker connectors with high-power mode adapters Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Fuse holder Mounting template Installation instructions ISPI Specifications: Physical Dimensions without Bracket (L x W x H): 11.69" x 7.06" x 1.75" (297 x 180 x 45 mm) Physical Dimensions with Bracket (L x W x H): 11.69" x 7.06" x 2.13" (297 x 180 x 50 mm) Weight: 5.95 lb (2.7 kg) Water Rating: IPX2 Amplifier Class: Class-D CEA-2006 Power Rating: 150 watt RMS x 6 @ 14.4 V input - 4 ohm < 1% THD Total Rated Power Output, 2 Ohm (Watts): 290 watt RMS x 6 @ 14.4 V input - 2 ohm < 1% THD Total Rated Power Output, 4 ohm Bridged (watts): 580 watt RMS x 3 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak Power (watts): 1800 watts Input Sensitivity: 1.6 V RMS Input Impedance: 22k ohm Operating Voltage: 10.8 V - 16 V DC Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input Current Draw, On, No Audio: < 1.32 A @ 14.4 V input Fuse Rating: 125 A electronic fuse (no replacement necessary) Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting Ignition Safety Protected (SAE J1171): Yes Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit Operating temperature range: 32° to 122° F (0° to 50° C) Warranty: 3 years

Apollo™ Monoblock & 4 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo Monoblock or 4 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 4.72" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush/Surface Mount 4-Channel Class D Amplifier with Acrylic Cover - 4x180W RMS @ 4 Ohm Experience the pinnacle of car audio performance with DS18’s FX4! Designed and manufactured specifically for professional car audio applications, the FX4 combines high-quality sound and a compact footprint for effortless installation. The FX Series from DS18 offers a unique advantage over standard amplifiers - the ability to be installed in both flush and surface applications. With the included surface mode adapter, the FX4 can seamlessly integrate into any custom car audio build, ensuring optimal performance without sacrificing space or style. Plus, the integrated Digital LED lights on the adapter add a touch of elegance to your car audio setup, making it a visually stunning focal point. Featuring an IPX5 water-resistant design (when flush mounted) and coated 4-layer PCB, this amplifier is built to withstand harsh conditions and prevent corrosion. The flush or surface installation mode makes it easy to install on ATV/RV roofs, boat walls, car audio panels, or racks, ensuring a clean and professional look. With its stable and reliable Class D circuit design, LED clipping indicator for easier adjustment, selectable/variable crossovers, direct insert power, speaker terminals, and easy installation process, the FX4 is a true powerhouse in the world of car audio. Delivering MAX power of 3000W and RMS power of 180W x 4 at 4 ohms, 250W x 4 at 2-ohm, and 500W x 2 at 4-ohm Bridge; the FX4 packs a powerful punch. Elevate your car audio experience to new heights with DS18’s FX4! *The FX Series adapters are not designed to be water-resistant. Please exercise caution to prevent water contact with the RGB LEDs, as exposure may result in a short circuit* Features: 4 Channel Full Range Flush Mount / Surface Mount 4 X 180 Watts RMS @ 4 Ohm CLASS D RGB Dream LED Lights Built-in Crossover / Water Resistant Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz-20kHZ  4 Ohm RMS Power - 4x180W 2 Ohm RMS Power - 4x250W Signal-to-Noise Ratio - >87dB  Product Dimensions - 9"L x 4.7"W x 1.85"H

HYDRO Full Range Digital Marine 4-Channel Amplifier - 720W Whether you are the type of audio enthusiast that likes to hit the open road on his bike, ride the rough trails on your side by side, or cruise the open waters, you are going to need a powerful and waterproof rated  amp that has a small footprint and also make great power.  DS18 has a line just for the job with the NXL series of amplifiers to power your whole system. This 4 channel amplifier helps you accommodate for all your different speaker setups without having to look further. Being a full range amps, these can be run on subs, mids, or tweeters because of the internal design of the amp.  All units have stable and reliable 4-layer PCB layouts, IPX67 rated for power sports, has an ultra-compact size for easy installation, and has audio precision quality control verification. Features: Stable and reliable 4 layers PCB layout design IPX67 Waterproof for Powersports applications Ultra compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels: 4 Frequency Range: 20Hz - 20KHz Max Power:    720W  2 Ohm RMS Power Per Channel: 150W x 4 4 Ohm RMS Power Per Channel: 100W x 4 4 Ohm Bridged Power Per Channel:  260W x 2 Signal-to-Noise Ratio: 90 dB Dimensions (L x W x H) - 200mm x 93.4mm x 39.8mm *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HYDRO Flush Mount Full Range Digital Marine 4-Channel AMP w/Voltmeter - 1200W Whether you are the type of audio enthusiast that likes to hit the open road on his bike, ride the rough trails on your side by side, or cruise the open waters, you are going to need a powerful and waterproof rated amp that has a small footprint and also makes great power.  The F4 is an exact duplicate of the very popular NXL-400.4 but is now offered in flat-mount configuration so you can keep a flush and clean look to your install. DS18 has a line just for the job with the NXL series of amplifiers to power your whole system. This 5 channel amplifier helps you accommodate all your different speaker setups without having to look further. Being full range amps, these can be run on subs, mids, or tweeters because of the internal design of the amp.  All units have stable and reliable 4-layer PCB layouts, IPX67 rated for power sports, has an ultra-compact size for easy installation, and has audio precision quality control verification. Features: Flush / Flat mount design so you can keep your install looking clean and flush Stable and reliable 4 layers PCB layout design IPX67 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz 2 Ohm RMS Power (14.4V) Per Channel - 4 x 160W 4 Ohm RMS Power (14.4V) Per Channel - 4 x 100W 4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 320W Signal-to-Noise Ratio - >95dB Product Dimensions: (L x W x H) - 238mm x 135mm x 41mm *Sold as an Individual

FUSION Apollo™ amplifiers are the difference between hearing the music and feeling it. They are efficient, easy-to-install, and work with your compatible FUSION stereo system. The compact zone amplifier provides audio zone expansion for high-quality sound in more zones onboard your boat. The monoblock and multichannel amplifiers add extra power to your system. They all use less power, so you can listen to music longer with less drain on your battery. Plus, the Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments. Know about electrical or temperature issues with just a glance at the amplifier’s LED indicators. The included mounting brackets make this amplifier easy to install and ideal for your setup.       The Following FUSION Apollo™ Amplifiers Are Now Available:     2000-WATT MONOBLOCK AMPLIFIER: Add extra power to your system with this 2000-watt (650-watt RMS at 4 ohms) monoblock amplifier that’s specifically designed to power a subwoofer.     1200-WATT 4 CHANNEL AMPLIFIER: This 4 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.     1800-WATT 6 CHANNEL AMPLIFIER: This 6 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.     2400-WATT 8 CHANNEL AMPLIFIER: This 8 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power.   140-WATT ZONE AMPLIFIER: The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.       Specials    Closeouts    Remanufactured    Rebates

Apollo™ Marine Zone Amplifier - 140W Amplify the moment with an Apollo™ marine amplifier – designed specifically for use with your Fusion DSP-enabled marine stereo and Fusion speakers. This efficient zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. With 20-watt RMS per channel (at 4 ohms), this 2 channel amplifier allows you to add an extra pair of speakers on board.  The Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments (Requires setup using the Fusion-Link™ app on a compatible smartphone). Fusion Apollo AP-DA214 Features: RMS Power - 20-watt RMS per channel (at 4 ohms), allowing you to add an extra pair of speakers on board. Efficient Class-D Design - Uses less power, so you can listen to music for longer at higher volumes, with less drain on the battery. Easy Tune Feature - Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (Requires setup using the Fusion-Link app on a compatible smartphone). Compact Design - The compact size of the zone amplifier makes it a versatile option for mounting on board. LED Indicator - Show issues with electrical currents and shorts as well as temperature. Less Total Harmonic Distortion - The amplifier is designed with minimal distortion and noise, allowing for better quality audio. Ignition Protected - Intelligent electronic fuse prevents damage from over/under current, temperature, output short, and other faults. Conformal Coated PCBs - The amplifier circuit board has been specially coated to provide enhanced protection from the marine elements. Powder Coated Aluminum Finish - Salt fog, temperature, vibration, and UV tested with a modern aesthetic design to add style to your boat. Easy Installation - A mounting bracket is included in the box allowing you to simply clip the amplifier in place for a clean finish. 12- and 24-Volt Compatible - The zone amplifier is designed to work with both 12- and 24-volt electrical systems. True-Marine™ Design - Designed to withstand the harshest marine environments season after season, the zone amplifier is IPX7 rated and comes with a 3-year warranty. Technical Specifications: Peak Power - 140 Watts Power at 4 ohm - 20 Watt RMS Power at 2 ohm - 30 Watt RMS Operating Voltage - 10.8 to 32 VDC Class D Amplifier Water Rating - IPX7 Dimensions with bracket (W x H x D) - 3.94" x 4.53" x 1.89" Dimensions without bracket (W x H x D) - 3.94" x 3.94" x 1.57" Weight - 1.01 pounds In the Box: One Apollo zone amplifier One mounting bracket Three 6-gauge, self-tapping screws Wiring loom Installation instructions Important safety and product information (ISPI) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SG-DA41400 Signature Series - 1400W, 4 Channel Amplifier Powerful, Rock-The-Boat Sound! 1400 Watts of Class D output will run up to 4 pairs of speakers. Features: 4-Channel, 1400 Watt, Class-D Amplifier Can amplify up to 4-pairs of Fusion speakers (speakers run in parallel on 4-channels) 2-Ohm Stable Superior 1-piece HEAVY-DUTY die cast chassis 5-Way circuitry protection Thermal/Reversed Power Polarity/DC Offset Protection/High + Low Voltage Discrete Install Panel-Covers Amp set-up controls and hides all cabling FLFC Low Frequency Control-Accurate fine tuning of frequency response Conformal coated PCB WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Apollo™ 6 & 8 Channel Marine Amplifier Mounting Bracket Use this mounting bracket to easily install your Apollo 6/8 channel marine amplifier.  Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.  Technical Specifications: Dimensions (WxHxD) - 7.87" x 6.08" x .39" In the Box: Mounting bracket Four 8-gauge, self-tapping screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MS-AM504 4-Channel Marine Amplifier - 500W  Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 500 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through RCA output enables linking of multiple amplifiers for enhanced system performance. 4 Channels - Capable of powering 4 speakers, a sub and a pair of speakers or 8 speakers in parallel (2 speakers per channel in parellel @ 2 Ohms). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RCA Cable - 4 Channel - 6' This RCA connector cables is designed to connect your Fusion stereo to your Fusion amplifier.  Features: Superior Noise Rejection - The directional, shielded twisted pair cable provides superior noise rejection, resulting in a cleaner, clearer, enhanced audio signal. Nickel-Plated Connectors - Designed to prevent corrosion, these gold-plated connectors will last season after season. Color-Coded Connectors - Avoid unnecessary installation issues with easily identifiable colored bands on the left and right connectors. Technical Specifications: Type - 4 Zone/4 Channel Length - 6' or 1.8 M Connector - Nickel-plated RCA *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RCA Cable - 4 Channel - 25' This RCA connector cables is designed to connect your Fusion stereo to your Fusion amplifier.  Features: Superior Noise Rejection - The directional, shielded twisted pair cable provides superior noise rejection, resulting in a cleaner, clearer, enhanced audio signal. Nickel-Plated Connectors - Designed to prevent corrosion, these gold-plated connectors will last season after season. Color-Coded Connectors - Avoid unnecessary installation issues with easily identifiable colored bands on the left and right connectors. Technical Specifications: Type - 4 Zone/4 Channel Length - 25' or 7.6 M Connector - Nickel-plated RCA *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RCA Cable - 4 Channel - 12' This RCA connector cables is designed to connect your Fusion stereo to your Fusion amplifier. Features: Superior Noise Rejection - The directional, shielded twisted pair cable provides superior noise rejection, resulting in a cleaner, clearer, enhanced audio signal. Nickel-Plated Connectors - Designed to prevent corrosion, these gold-plated connectors will last season after season. Color-Coded Connectors - Avoid unnecessary installation issues with easily identifiable colored bands on the left and right connectors. Technical Specifications: Type - 4 Zone/4 Channel Length - 12' or 3.6 M Connector - Nickel-plated RCA *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.