|
MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.
Features:
Carded blister packaging for simple retail display
Compatible with MIDI bolt-down fuses up to 200A (sold separately)
The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
Slots molded into the base enable secure tie-wrap mounting
Zinc-plated steel M5 studs and hex nuts
Bolt-down fuse holder base features M4 mounting holes
UL 94 V-0 flammability rating
Applications:
Battery and alternator Connections
*Fuses not included
|
8.16 |
|
|
MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply.
Features:
Blister packaging promotes the easy retail display
Base style 2 with mounting brackets and M6 holes is designed for outboard mounting
M5 threaded studs, split washers, and hex nuts for simple fuse installation
Protective cover openings at the ends accommodate heavy-duty cables
Applications:
High-Current Circuit Protection
*Fuses not included
|
6.65 |
|
|
MEGA Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 500 Amps
The MEGA Flex Series 32V Bolt-Down Fuse Holder makes it simple to install high-amp fusing thanks to its flexible cover. The UL 94 V-0 rated cover features 6 different positions for cable entry, plus its flexibility accommodates large wire sizes and ring terminal stack up. Designed for MEGA fuses up to 500 amps, this bolt-down fuse holder also has a dovetail feature on the sides that allows you to connect multiple MEGA Flex Series fuse holders to create a fused high-power distribution block. This fuse holder (02981028-BP) includes stainless steel M8 studs, hex nuts, and split washers.
Features:
Blister packaging promotes the easy retail display
Compatible with MEGA high-current bolt-down fuses up to 500 amps
Black or red flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetailing feature lets you connect multiple MEGA Flex Series fuse holders together to create a fused high-power distribution block (busbars for multi-fuse applications are sold separately)
Slots molded into the base enable secure tie-wrap mounting
Bolt-down fuse holder base features an M6 mounting hole and an M6 slot measuring 6mm long
Includes stainless steel M8 studs, hex nuts, and split washers
The flexible cover has a UL 94 V-0 flammability rating
Applications:
Battery and Alternator Connections
High-Current Circuit Protection
Electric Construction Equipment
*Fuses not included
|
12.43 |
|
|
Furuno BBWX4 - Save Up To $200 in Rebates!
Purchase a new Furuno BBWX4 SiriusXM Satellite Weather & Radio Receiver now until March 31st, 2021, to qualify for a $100 rebate from Furuno. On top of that, SiriusXM is offering an additional $100 VISA Gift Card for activating your device with a qualifying plan*. That’s up to $200 in rebates!
For serious anglers looking for that competitive edge, the BBWX4 will soon offer extremely detailed “Fish Mapping” functionality on select NavNet TZtouch displays, providing you with a big advantage you’ll love having on tournament day!
Specials Closeouts Remanufactured Rebates
|
|
|
Receive up to $200 back when you purchase select B&G Vulcan Chartplotters. Purchase a qualifying model now until April 30th, 2021. Don't miss out on these super savings! Offer valid now until April 30th, 2021
B&G's Vulcan range of sailing chartplotters take the guesswork out of sailing. Whether you’re an experienced sailor or just starting out, Vulcan is packed with features that will help you get the most from your time on the water.
*Offer valid now until April 30th, 2021
Specials Closeouts Remanufactured Rebates
|
|
|
Fuse Holder C100
Fuse holder, type C100 including cover, suitable for fuses of 40 to 500 amp
|
70.20 |
|
|
Fuse Holder for ANL-Fuse
This Victron fuse holder is for ANL fuses. Please note that this fuse holder doesn’t have a cover.
Features:
2 terminal studs
Please contact your dealer for any returns, repairs or support issues related to this product.
|
12.24 |
|
|
Holder MEGA Fuse
Victron MEGA Fuse Holder is made of high quality material and very durable, not cheap flimsy plastic. Fits all of Victron’s MEGA fuses.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
14.28 |
|
|
Q-Series PRO Driving/Down Diffused - Black
The Q-Series PRO is designed and built to withstand the harshest working environments imaginable. Constructed of the toughest and most durable materials available, including a double-pass TIG-welded stainless steel bracket with vibration isolator, the Q-Series PRO provides reliable, powerful LED light and is tough enough to withstand mining, agriculture, construction, and the oil and gas industries. The rugged construction also makes it well suited to extreme environments. If the application is severe, the Q-Series PRO is the ultimate lighting solution. RIGID’s Q-Series PRO lights are also available with a durable white finish.
Though suitable for marine applications, RIGID’s white lighting products are perfect for use anywhere an alternative to black is desired. The distinctive white is a durable UV-resistant powder coated finish with an additional chromate conversion coating for superior corrosion resistance. They feature the same legendary lighting technology and superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.
Features:
GORE® Pressure Equalizing Vent
Unbreakable Polycarbonate Lens
Durable UV 3800 Polyester Powdercoat
IP68 Certified
MIL810-STDG Vibration Certified
ROHS Compliant
Over/Under Voltage Protection
Operating Temp -40º F +145º F
Sealed Deutsch Connector
50,000+ Hour Lifespan
Electrically Protected Against RFI/EMC Interference
Integrated Thermal Management System
Specifications:
Watts: 195
Amp Draw: 13.9
LED's: 24
Raw Lumens: 19008
Lux @ 10m: 445.87
Beam Distance: 211.2 m
Peak Beam Intensity: 44,587 cd
|
540.00 |
|
|
Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - Grey
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: Grey
|
9.88 |
|
|
Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - White
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: White
|
10.62 |
|
|
Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - White
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: White
|
9.88 |
|
|
Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - Grey
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: Grey
|
10.62 |
|
|
Nor'Easter Mooring Whips
2 Piece Whips f/Boats up to 30' - Adjustable Base
Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts.
Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.
|
1038.24 |
|
|
Nor'Easter Mooring Whips
2 Piece Whips f/Boats up to 36' - Adjustable Base
Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts.
Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.
|
1138.32 |
|