|
Size 44 Low Profile Hatch Seal Kit
Replacement seals for the Low Profile hatch range. Works by holding the Acrylic pane into the frame.
In the Box:
Gasket
Instruction manual
*Sold as an Individual
|
41.64 |
|
|
Size 10 Low Profile Deck Hatch
The Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid-size yachts.
Features:
Outside handles allow the hatch to be opened from on deck if it is not locked (Sizes 00, 03,10, 20 & 41 have no outside handle and can only be opened from the inside.)
Low profile hatches open up to 180° (round hatches open to 170°)
Friction levers hold the lid open in any position up to 95°
Anodized aluminum frame for corrosion resistance
Curved upper frame profile for strength as well as modern styling
Technical Specifications:
Support System - Self-supporting
Color - Smoke Grey
Weight - 4.9lbs
Dimensions (L x W x H) - 13" x 13" x 1"
Cut-Out Dimensions (L x W) - 10.25" x 10.25"
*Sold as an Individual
|
347.47 |
|
|
Size 54 Medium Profile Hatch
Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar’s unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the low-profile hatch.
Features:
Outside handles allow the hatch to be opened from the deck if it is not locked
Friction levers hold the lid open in any position up to 95°
Anodized aluminum frame for corrosion resistance
Curved upper frame profile for strength as well as modern styling
A full range of spare parts is available
Specifications:
Lower Frame: 9/16 in.
Acrylic Color: Smoke Grey
Hatch Weight: 14.3 lb.
Acrylic Window Thickness: 1/2 in.
Length: 18-1/4 in.
Width: 22-3/4 in.
Height: 1-1/4"
Radii R: 2-7/8 in.
Cut-Out Length: 15-7/16 in.
Cut-Out Width: 19-15/16 in.
Cut-Out Radii R1: 1-11/16 in.
|
687.73 |
|
|
Black Anodized Aluminum Low-Profile Cable Seal
The DS-LP-16-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P-BLK seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
The cable seal is black
IP68 Waterproof
Designed for 2-8mm cables (0.08"-0.35")
UV Resistant
Constructed from marine-grade aluminum
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw keeping seal technology below the mounting surface
|
31.69 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 2-8mm
The DS-LP-16-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 2–8mm cables (0.08"–0.35").
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
38.45 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 4-9mm
The DS-LP-21A-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 4–9mm cables (0.15"–0.35")
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
44.52 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mm
The DS-LP-30-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14mm (0.3–0.5") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to our DS30-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 9-14mm cables (0.35"–0.55")
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
52.62 |
|
|
Black Anodized Aluminum Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mm
The DS-LP-21B-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P-BLK seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
The cable seal is black
IP68 Waterproof
Designed for 9-14mm cables (0.35"–0.55")
UV Resistant
Constructed from marine-grade aluminium
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
37.09 |
|
|
Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mm
The DS-LP-21B-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for 9-14mm cables (0.35"–0.55")
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
44.52 |
|
|
Black Anodized Aluminum Low-Profile Cable Seal for Cables 4-9mm
The DS-LP-21A-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P-BLK seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
The cable seal is black
IP68 Waterproof
Designed for 4–9mm cables (0.15"–0.35")
UV Resistant
Constructed from marine-grade aluminum
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal can be pocketed inside a hole made from a hole saw
|
37.09 |
|
|
Black Anodized Aluminum Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mm
The DS-LP-30-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9-14mm (0.35"–0.55") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS30-P-BLK seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
The cable seal is black
IP68 Waterproof
Designed for 9-14mm cables (0.35"–0.55")
UV Resistant
Constructed from marine-grade aluminum
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal can be pocketed inside a hole made from a hole saw
|
45.19 |
|
|
Submersible LED Low-Profile Trailer Light Kit
Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
Kit Includes:
Includes (2) multi-functional (stop/tail/turn) submersible low-profile LED trailer lights
License plate bracket
Wiring harness and installation hardware
|
45.72 |
|
|
Black Anodized Aluminum Low-Profile Multi Cable Seal for Cables Up to 15mm
The DS-LP-MULTI-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 71% in comparison to Scanstrut's DS-MULTI-P-BLK seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
The cable seal is black
IP68 Waterproof
Designed for multiple cables up to 15mm (0.59”)
UV Resistant
Constructed from marine-grade aluminum
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
75.60 |
|
|
Stainless Steel Low-Profile Multi Cable Seal for Cables Up to 15mm
The DS-LP-MULTI-S Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution.
Premium Construction
Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.
Low-Profile Design
The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 61% in comparison to Scanstrut's DS-MULTI seal. This translates to a clean, flush, more refined look.
Watertight Installation
Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.
Effortless and Repeat Installations
Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.
Features:
IP68 Waterproof
Designed for multiple cables up to 15mm (0.59”).
UV Resistant
Constructed from marine-grade 316 stainless steel
No messy sealant, ensuring a tidy finish
Simplified installation that saves you time and effort
Guaranteed 100% watertight seal
Perfect for solar panels, light bars, rooftop electronics, and more
Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface
|
95.86 |
|
|
X-Grip® Large Phone Mount with Low-Profile Medium Tough-Claw™
The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter.
This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size.
Features:
Low-profile phone mount clamps to your handlebar with the turn of a single knob
includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface
The spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; Includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit
Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps
Hole Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max
Clamp Range (inch): 1" - 1.6" diameter
Materials: High-strength composite and stainless steel
Weight: 0.78 lb.
Compatible Devices:
Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max
Blackberry: Evolve X
Blackview: BV9900 and BV9900 Pro
Cat: S42, S62, and S62 Pro
Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S
Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, and Pixel 7 Pro
HTC: Bolt and U Ultra
Huawei: Mate 20 X
Kyocera: DuraSport 5G
LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture
Magellan: TR5 and TR7
Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3
Rand: McNally Road Explorer 5 and McNally TND 540
Razer: Phone 2
Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra
Sonim: RS60
Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium
|
54.98 |
|