Universal Adjustment Arm Features: This part number is for the “Arm Only”, It does not come with the Belt Buddy Adjustment Mechanism The Belt Buddy Mechanism which goes with the UAA is part number BB, grouped together the set is part number UBB The Belt Buddy Mechanism which goes with most any adjustment arm is part number BBU The UAA is 10.3″ long and the adjustment slot provides up to 4.5″ of travel.  The adjustment slot is 0.53″ wide This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Universal Adjustment Arm - Offset Universal Adjustment Arm for the Belt Buddy with a 1/2″ offset for certain mounting applications which require an offset. This part number is for the “Arm Only”, It does not come with the Belt Buddy Adjustment Mechanism. The Belt Buddy Mechanism which goes with the UAA2 is part number BB, grouped together the set is part number UBB2. The Belt Buddy Mechanism which goes with most any adjustment arm is part number BBU. The UAA2 is 10.3″ long and the adjustment slot provides up to 4.5″ of travel.  The adjustment slot is 0.53″ wide. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Belt Buddy w/o Adjustment Arm Universal Belt Buddy Mechanism;  for use with exising adjustment arms Does not come with the Balmar Universal Adjustment Arm (UAA). Caution:  This approach sacrifices some “travel” in the existing adjustment arm so the BBU mechanism can be anchored to the arm.  Make certain your alternator mounting does not need this travel before purchasing the BBU. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Belt Buddy w/Universal Adjustment Arm To utilize only the adjustment mechanism with an existing adjustment arm, purchase part number BBU. Caution:  This approach sacrifices some “travel” in the existing adjustment arm so the BBU mechanism can be anchored to the arm.  Make certain your alternator mounting does not need this travel before purchasing the BBU. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Belt Buddy with Universal Offset Adjustment Arm (UAA2) Belt Buddy Kit; Includes the Universal Adjustment Arm (UAA2) with a 1/2" offset for mounting applications which require an offset to the alternator and Belt Buddy Mechanism (BB). To utilize only the adjustment mechanism with an existing adjustment arm, purchase part number BBU. Caution:  This approach sacrifices some "travel" in the existing adjustment arm so the BBU mechanism can be anchored to the arm.  Make certain your alternator mounting does not need this travel before purchasing the BBU. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Deluxe Ultra HD Adjustable Arm with J Hook Tip - 12-18"  Features: Deluxe Adjustable Arm 12"-18" 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

Deluxe Adjustable Arm 19"-24" Ultra HD  Deluxe Adjustable Arm 19"-24" Features: 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

Deluxe Adjustable Arm with Adjustable Tip 12" - 18" Ultra HD  Deluxe Adjustable Arm with Adjustable Tip 12" - 18" Features: 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

Deluxe Adjustable Arm with Adjustable Tip 19" - 24" Ultra HD Deluxe Adjustable Arm with Adjustable Tip 19" - 24" Features: 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

ROKK Mini Mount Kit - Fixed Mount - Universal Top Plate Universal design ensures you have all the pieces needed to mount a variety of electronics on a Scanstrut Mini Mount and Adjustable Body. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more.  Move your electronics conveniently between different types of base mounts in different locations in one easy click.  Want to unlock multiple mounting options in different locations or simply mount a different electronic device?  Just add another top or base to your modular kit and extend possibilities of your ROKK mini starter kit. This three (3) part kit installs in minutes and allows quick release of mounted equipment. Features: Engineered to withstand high shock loading. Universal design top plate ensures you only need to drill holes for the footprint of your specific display using the template and jig provided.  Template is color coded for different electronics to make identifying the holes you need to drill as easy as possible Base secures to a flat surface with included hardware. In the Box: RLS -401 ROKK Mini Surface Mount RLS-AM ROKK Mini Adjustable Arm RLS-513 ROKK Universal Top Plate *Sold as a Kit

ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 Ohm VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.  These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.  Features: Connection - M4 Stud Voltage: 6-24V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 Ohm VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.  These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.  Features: Connection - M4 Stud Voltage: 6-24V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

20" Adjustable Poly Filet Table Filet table designed for extreme durability with U.V. resistance. Can be used for cutting bait, fileting fish or serving food and beverages. Made from FDA approved, high density polyethylene that will not discolor, crack, mildew or absorb fish odors and is easy to clean. They feature a storage slot for your filet knife and fishing pliers. The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, brightdip anodized pipe to fit all standard size rod holders. The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used. All fasteners are stainless marine grade quality. Features: FDA-approved, UV-stabilized, high density Polyethylene table Holds a knife and a plier Drainage openings for easy clean-up Anodized Aluminum mount fits into any standard gunnel rod holder Rugged engineered nylon tilt mount locks at many angles Folds flat for storage under deck Stainless fasteners & easy to assemble mount Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at Limited one year warranty Made in USA

32" Adjustable Poly Filet Table Filet table designed for extreme durability with U.V. resistance. Can be used for cutting bait, fileting fish or serving food and beverages. Made from FDA approved, high density polyethylene that will not discolor, crack, mildew or absorb fish odors and is easy to clean. They feature a storage slot for your filet knife and fishing pliers. The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, brightdip anodized pipe to fit all standard size rod holders. The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used. All fasteners are stainless marine grade quality. Features: FDA-approved, UV-stabilized, high density Polyethylene table Holds a knife and a plier Drainage openings for easy clean-up Anodized Aluminum mount fits into any standard gunnel rod holder Rugged engineered nylon tilt mount locks at many angles Folds flat for storage under deck Stainless fasteners & easy to assemble mount Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at Limited one year warranty Made in USA

Deluxe Wiper Arm - Flat Tip - 12-18"  Adjustable Arm with Flat Tip - 12-18" Features: Easy to install Anti-glare painted stainless steel HD stainless steel spring Replaces all arms on HD motors