30 Amp 125 Volt Power Inlet (White) 301EL-B Product Features: Marine grade UV stabilized glass-filled polyester construction Easy Lock System Watertight cap 4-way right angle rear safety enclosure Stainless steel trim WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30A 125V Power Inlet 303SSEL-B Product Features Solid cast 316 stainless steel Locking waterproof cap Easy Lock System Soft Touch cap stays open in the upright position 8-way right angle rear safety enclosure WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50Amp/125V Inlets Stainless Steel Power Inlet Marinco® Power Inlets Easy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment. Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets. The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance. Interior hardware is marine-grade stainless steel. Rear Enclosure Made of flame-resistant UL94V0 plastic All rear enclosures are glass-filled polyester for strength Integral strain relief complies with ABYC requirements Multiple positions allow for maximum installation flexibility WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30A 125V Molded Cordset 25' Product Features: All Marinco 30A PowerCord Marine Cordsets are made of the highest quality, marine-grade construction with features you won't find on other power cords: Various length and color options for your specific needs Watertight molded plug and connector for safety and durability Heavy-duty, super flexible 10 gauge, 3 conductor cable Molded grip ends with Line-Up Ridge for easy blade alignment All models also include a standard threaded ring for hook-up to ordinary threaded inlets and accept the Marinco Easy Lock™ System Ring WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50Amp 125/250V Inlets Stainless Steel Power Inlet Marinco® Power Inlets Easy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment. Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets. The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance. Interior hardware is marine-grade stainless steel. Rear Enclosure Made of flame-resistant UL94V0 plastic All rear enclosures are glass-filled polyester for strength Integral strain relief complies with ABYC requirements Multiple positions allow for maximum installation flexibility WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50AM/30AF Power Grip Marine 12" Locking Adapter - M-Lock/F-Locking Adapter The Camco 50-amp male locking adapter to 30-amp female locking adapter is a 12" adapter cord with a threaded locking ring that creates a weatherproof connection. The durable, long-lasting STW cord has a 180 degree turn from male to female end. Features: 50 AMP locking male end with 30 AMP locking female end 12-inch adapter Threaded locking ring creates a weatherproof connection Durable, long-lasting STW cord 180 degree turn from male to female end

APT-250-01-B - Aluminum PowerTower® Radar Mount - 10" Aft Leaning - Black The Scanstrut Aluminum PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

Shore Power Straight Adapter, 30A M-15A-F Ergonomic EEL-style adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet (or equipment) of dissimilar power configuration. They feature a power-on LED to confirm connection and integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications. Straight Adapter - Not recommended for useis wet locations Boat Side: Female Connector - Attaches to boat inlet or cordset 15 or 20A 125v Straight Blade Dock Side: Male Plug - Attaches to dockside receptacle or cordset 20A 125V Locking WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50Amp 125V/250V Inlets Stainless Steel Power Inlet w/o Rear Safety Enclosure Marinco® Power Inlets Easy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment. Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets. The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance. Interior hardware is marine-grade stainless steel. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30A 125V Locking Connector w/103RN Weatherproof Cover The 305CRCN.VPK 30A 125V locking blade female shore power connector features corrosion resistant contacts and terminals. A weather resistant cover and threaded sealing ring are included for added protection in harsh environments. The receptacle body is made of yellow nylon with a ribbed design for secure grip. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Threaded Ring - 30A - 125V Threaded sealing for use with 20 and 30A weatherproof boots and sealing collar

EEL "Y" Adapters These adapters are equipped with sealing collars and are for use in wet locations. Boat Side Female Connector: Attaches to boat inlet or cordset (2)50A-125V Locking w/ Sealing Collar System Dock Side Male Plug: Attaches to dockside receptacle or cordset (1)50A-125/250V Locking WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

15AM/30AF Power Grip Dogbone - Marine 12" 90M/F-Locking The Camco 15M/30F AMP Locking Adapter is a 12" adapter cord with a threaded locking ring that creates a weatherproof connection. The durable, long-lasting STW cord has a 180 degree turn from male to female end. Features: 15 AMP locking standard male end with 30 AMP female end 12-inch adapter Threaded locking ring creates a weatherproof connection Durable, long-lasting STW cord 180 degree turn from male to female end

Replacement interior for 303SSEL-B, 303SSI-B, and 301 EL-B power inlets. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50A 125/250V EL Inlet with Enclosure Marinco standard inlets feature UV stabilized glass-filled polyester construction for long-lasting strength. Their robust construction and corrosion-resistance provides long life in the harsh marine environment. Technical features are designed to make them easy to install and a pleasure to use for the marine professional or the casual recreational boater.