4026 AC Isolation Cover - 5-1/4 x 3-3/4 x 3 Features: Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC and DC Covers a panel, or other object, up to 5-1/4" long x 3-3/4" width x 3" deep WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4027 AC Isolation Cover - 5-1/4 x 7-1/2x3 Features: Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC and DC Covers a panel, or other object, 7-1/2" long x 5-1/4" wide, x 3" deep WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4028 AC Isolation Cover - 7-1/2 x 10-1/2x3 Features: Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC and DC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump 80gpm, 1-1/4" Outlet 3/4HP 3PH

4029 AC Isolation Cover - 8 Position, 1 Column Features: Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC and DC Used on Blue Sea Systems toggle style circuit breaker panels only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1331 AC Insulating Cover for 1 Module Features: Isolation of 360 panel AC components and circuits from DC system elements Meets ABYC safety requirements for panels with combined AC and DC loads Provides mechanical protection for panel backs protruding into lockers Modular design consists of three different interlocking components - SIDE, TOP, and END Interlocking companion pieces SIDE, TOP, and END can be stacked to accommodate large AC components Cover breakouts allow wire access in any direction WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lift Handle Size:2-1/4" x 3" Fastener:#8(4) Material:304 Stainless Steel

Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 3" - 3-Pack - Black Package of 3 Black 3"(7.6cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm) Wire Range: 16-10 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 3" - 3-Pack - Red Package of 3 Red 3"(7.6cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm) Wire Range: 16-10 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heat Shrink Tubing 1/4" x 3" - Black & Red Combo Package of 1/1 Black, Red 3 in (7.6 cm) long sections with a 1/4 in (6.4 mm) diameter that shrinks to 5/64 in (2 mm). Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257 deg F / 125 deg C Operating temperature range of -40 deg C to 110 deg C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FINISH THOMPSON AC6HJS1V620B0118 HIGH HEAD 1 1/4 X 3/4 316SS Applications Chemical processing Printed circuit boards Pharmaceutical Waste water treatment Port Sizes   (Suction x Discharge) &  Connection Types:  1.25 x 0.75 NPT or BSP  1.5 x 1 Electropolished Tri-clamps  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  100 psi (6.9 bar)    @3450 RPM  @2900 RPM  Flow Range*:  3 to 100 gpm  0.68 to 18.2 m3/h  Maximum Head:  144.1 ft  31.1 m  Power Range**:  2 to 2.8 hp  0.81 to 1.44 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.  Type:  Stainless Steel Mechanically Sealed High Head  Configuration:  Horizontal  Construction Materials:  316 Stainless Steel  O-ring Materials:  FKM, EPDM, Buna, or PTFE Encapsulated Silicone  Seal Type:  Bellows Type 21  Seal Materials:  Carbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®  Maximum Temperature:  300º F (149º C)

Marine Grade Electrical Wire Grommets - 45 Assorted Combo Pack, 1/4" to 3/4" Ancor's Marine Grade Electrical Wire Grommets Combo Pack. Features: 45-Pack Assorted from 1/4" to 3/4" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2101 PowerPost Plus Cable Connector - 1/4" Stud Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit. Features: 150AMP bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 1/4" x 1" Base Material is Black Nylon 8231 GHS WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8' Pole Kit Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.  Features: Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.  Rail Stand-off Kit - The rail stand-off kit includes two turnbuckle style struts that are adjustable from 6" to 12", two stainless steel 3" pole clamps and two stainless steel 1" rail clamps.  Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".  **NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES***