|
9093 Switch AC 120 + 120/240VAC OFF+2 Positions
Features:
Switches between 2 - 120 Volt AC shore power sources and 1 - 240 Volt AC source to 2 - 120V AC load groups
Switches both lines (hot) and neutral
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC Max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
479.99 |
|
|
9009
Switch, AC 120VAC
Amperes
32
Positions
2+OFF
Poles
2
Switches 2 - 120 or 230 Volt AC sources
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
137.99 |
|
|
9011
Switch, AC 120VAC
Amperes
65
Positions
2+OFF
Poles
2
Switches 2 - 120 or 230 Volt AC sources
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
305.53 |
|
|
9010
Switch, AC 120VAC
Amperes
32
Positions
3+OFF
Poles
2
Switches 2 - 120 or 230 Volt AC sources
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
172.57 |
|
|
Switch, AC 120V AC 30A OFF+2 Position
Features:
Switches between 2 - 120v AC shore power sources and 1 - 240v AC Source to 2 - 120v AC load groups
Switches both lines (hot) and neutral
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
219.14 |
|
|
9077
Switch, AC 240VAC
Amperes
65
Positions
3+OFF
Poles
3
Switches 3 - 120/240 Volt AC sources
Switches both lines (hot) and neutral
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
495.83 |
|
|
9019
Switch, AC 240VAC
Amperes
63
Positions
2+OFF
Poles
3
Switches 2 - 120/240 Volt AC sources
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
392.69 |
|
|
10/240V AC Rotary 65A OFF + 2 Sources 2x120V/1x240V
Features:
Switches between two 120V AC shore power sources and one 240V AC source to two 120V AC load groups
Red reverse polarity LED indicators
Green power available LED indicators
Specifications:
Source Selection: 2
Niminal Voltage: 120/240V AC
Source In: 3
Height: 4.75"
Width: 4.88"
Depth: 4.50"
Weight: 3.50lbs
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
543.49 |
|
|
SPST Sealed Rocker Switch - 12V/24V - (ON)/OFF
Single pole, single throw switch turns one circuit on and off.
Features:
Nominal voltage is 12V DC
Rated for 25A at12V DC
Two 1/4" blade terminals
Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Same as Cole Hersee part number 58027-02
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
6.65 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0100 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0100
|
224.25 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0200 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March AC-1A-MD-1/2 is suitable for your application, please contact March Pump.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0200
|
202.80 |
|
|
2-Position SPST Sealed Rocker Switch - 12V/24V - ON/OFF
Single pole, single throw switch turns one circuit on and off.
Features:
Nominal voltage is 12V/24V DC
Rated for 20A at12V DC, 15A at 24V DC
Two 1/4" blade terminals
Snap fit into panels .093" - .187" thick
IP 66
Same as Cole Hersee part number M-58031-01
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.21 |
|
|
AC Rotary Switch Panel 65 AMP - 2 Positions + OFF - 4 Pole
Features:
Switches between 2-120V AC shore power sources
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Red reverse polarity LED indicators
Green power available LED indicators
Switches AC sources
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two or three different AC sources to one circuit
Includes heavy duty industrial-rated switch
Red reverse polarity LED indicators
Green power-available LED indicators
Specifications:
Positions: 2 + Off
Nominal Voltage: 240v AC
Poles: 4
Maximum Amperage: 65A
Source In: 3
Height: 3.75"
Width: 5.25"
Depth: 4.5"
Included:
(1) 9093 AC Rotary Switch - OFF + 2 Positions 120/240v AC 65A
(1) 9583 AC Rotary Panel Labels
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
513.01 |
|
|
120 Volt AC Main + 2 Positions
Features:
All circuit label positions are backlit
"ON" indicating LEDs installed in all circuit positions
Includes 4206-Square Format Label Set
Specifications:
Positions: 2
Nominal Voltage: 120V AC
Height: 4.75" (120.65mm)
Width: 4.88" (123.95mm)
Depth: 3.00" (76.2mm)
Weight: 1.58lb (0.72kg)
Includes:
(2) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A
(1) - 4206 - Basic AC Label Kit - 30 Black Square Labels [LABEL]
(1) - 7414 - A-Series Flat Rocker Circuit Breaker - Double Pole 30A (Main)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
224.29 |
|
|
8413 - Metal AC/DC Panel with M2 Vessel Systems Monitor & 22 Circuit Breakers (15A)
Complete AC/DC panel with M2 Vessel Systems Monitor (VSM) that provides monitoring of AC systems, DC systems, tanks, and bilges in one (1) compact OLED meter with NMEA 2000 connectivity.
Features:
ON indicating LEDs installed in all circuit positions
Backlit label positions
Circuit identification label sets included
White toggle circuit breakers match existing traditional panels
AC and DC buses installed, fully pre-wired, and ready for installation
The panel is marked to comply with ABYC standards
Red reverse polarity indicated LED
Technical Specifications:
Nominal Voltage - 120V AC and 12/24V DC
Positions - 8 AC Positions + Main and 14 DC Positions + Main
Meter - M2 Vessel Systems Monitor
Dimensions (H x W x D) - 9.25" x 15.77" x 3" (235 x 400.56 x 76.2mm)
In the Box:
8413 Panel
Labels
Mounting hardware
*Sold as Individual
|
1278.94 |
|