8033 Amber LED Indicator Light Features: Amber 12/24V DC 5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8167 LED Indicator Light Amber 230V AC 0.25 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8169 LED Indicator Light Amber 120V AC 0.5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8066 Red LED Indicator Light  Features: Red 120V AC 0.5 Millamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8034 LED Indicator Light Green 120V AC 0.5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8134 LED Indicator Light Green 230V AC 0.25 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8166 LED Indicator Light Red 230V AC 0.25 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8171 LED Indicator Light Red 12/24V DC 5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8172 LED Indicator Light Green 12/24V DC 5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blue Sea Systems Products on Water or Land In addition to the marine industry, Blue Sea Systems products can be found on emergency vehicles, RVs, agricultural equipment, off-road vehicles, and other industries where rugged, dependable products are required. 7650 Add-A-Battery Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution.  The Dual Circuit Plus™ Battery Switch isolates engine and house circuits and combines battery banks for emergency starting. WeatherDeck 4376 Water Resistant Circuit Breaker Panel The 4376 WeatherDeck is a water resistant circuit breaker panel with 6 positions.  It is rated IP67 for temporary immersion for 30 minutes.  The 4376 is designed for flybridge and open cockpit applications. 5025 ST Blade Fuse Block with Cover The 5025 ST Blade Fuse Block with a clear, insulating cover has 6 circuits and a negative bus.  The 5025 can be used for 24-circuits and has a positive distribution bus with a #10-32 stud.  Models are available with or without a cover. 7748 SafetyHub 150 Fuse Block The SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to ten fused circuits. It can be used for Main or Branch DC power distribution.

2" Amber LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0 The amber LED fog light POD by Black Oak LED offers enough power to fill any need users might possibly have. Using True Amber 3w LEDS, this Amber POD is the highest performer in its class. The POD delivers extreme IP69K durability to match such high performing LEDs allowing users to have confidence that these 2 inch fog lights are going to perform when needed. These PODs come in the Food Optic, which throws light in a 45° pattern and is perfect for Fog Light applications. Cree and Osram are the biggest names on the LED market for a reason. They put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. This light mounts virtually anywhere, and with all the hardware needed in the box, this 2-inch fog light is ready to go. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Cut through fog and rain Lower A-Pillar ditch lights on UTV's and trucks Plow through snow with ease of vision Race through dunes with better visibility Front bumper lights Technical Specifications: Total Wattage: 12W Amp. Draw: 1.1 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 1,244 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” amber pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

Paneltronics LED Indicator Light - 5/32" - 240 VDC - Amber Features: Ideal for use as Status or Alarm Indicators Large T-1 size LEDs Nylon housing is classified UL 94 v-0 Press to fit into 0.166" diameter Pigtails are tin plated, 22 gauge, stranded, copper, 7" in length stripped 1/4" (ABYC E-11.12.1.10 ABYC Exceptions 3, 4, and 5)

Paneltronics LED Indicator Lights - 1/4 - 14 VDC - Amber Ideal for use as High Visibility Status or Alarm Indicators Large T-1 3/4 size LED's Nylon housing is classified UL Press to fit into 0.25" diameter Pigtails are tin plated, 22 copper, 7" in length stripped (ABYC E-11.12.1.10 and ABYC Exceptions 3, 4, and 5)

Paneltronics LED Indicator Light - 1/4" - 120 VAC - Amber Ideal for use as High Visibility Status or Alarm Indicators Large T-1 3/4 size LED's Nylon housing is classified UL Press to fit into 0.25" diameter Pigtails are tin plated, 22 copper, 7" in length stripped (ABYC E-11.12.1.10 and ABYC Exceptions 3, 4, and 5)

Paneltronics LED Indicator Light - 5/32" - 120 VAC - Amber Ideal for use as Status or Alarm Indicators Large T-1 size LED's Nylon housing is classified UL Press to fit into 0.166" diameter Pigtails are tin plated, 22 copper, 7" in length stripped 1/4" (ABYC E-11.12.1.10 and ABYC E-11.16.1.1.2. Exceptions 3, 4, and 5)