|
DBT15 Dock Boost Transformer
The smart isolation boosting transformer. The Dock Boost Transformer (DBT) provides precision voltage regulation to the vessel, delivering complete protection from the most common shore power problems, including brownouts, spikes, sags, and low-line or high-line voltage conditions from the dock power pedestal. The DBT also provides three levels of boost to keep your ship powered even when input voltages sag by 35%.
The DBT features a compact and lightweight footprint. By providing an industry-recognized mounting pattern, it will fit as the perfect replacement for new construction or retrofit applications (direct replacement for the Charles Iso-Boost).
The DBT12/15 accepts any input voltage ranging from 167 V-270 V (47-70 Hz) and provides a Split phase 120/240V or 115/230 V output nominal. The DBT24 accepts nominal voltages of 230, 400V, and 480V - each with the same wide range – to provide a 115/230V Split phase output.
Features:
Drop-in replacement for the Charles Iso-boost
3 boosting levels utilizing a smart tap system
Lightweight and compact at 127lbs
Industry-recognized mounting pattern
The wide input range of 167-270 VAC
Parallelable for advanced applications
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
10290.01 |
|
|
DBT24 Dock Boost Transformer - Stud Terminals
The smart isolation boosting transformer. The Dock Boost Transformer (DBT) provides precision voltage regulation to the vessel, delivering complete protection from the most common shore power problems, including brownouts, spikes, sags, and low-line or high-line voltage conditions from the dock power pedestal. The DBT also provides three levels of boost to keep your ship powered even when input voltages sag by 35%.
The DBT features a compact and lightweight footprint. By providing an industry-recognized mounting pattern, it will fit as the perfect replacement for new construction or retrofit applications (direct replacement for the Charles Iso-Boost).
The DBT12/15 accepts any input voltage ranging from 167 V-270 V (47-70 Hz) and provides a Split phase 120/240V or 115/230 V output nominal. The DBT24 accepts nominal voltages of 230, 400V, and 480V - each with the same wide range – to provide a 115/230V Split phase output.
Features:
Drop-in replacement for the Charles Iso-boost
3 boosting levels utilizing a smart tap system
Lightweight and compact at 127lbs
Industry-recognized mounting pattern
The wide input range of 167-270 VAC
Parallelable for advanced applications
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
15330.00 |
|
|
DBT12 Dock Boost Transformer - Single Phase Output
The smart isolation boosting transformer. The Dock Boost Transformer (DBT) provides precision voltage regulation to the vessel, delivering complete protection from the most common shore power problems, including brownouts, spikes, sags, and low-line or high-line voltage conditions from the dock power pedestal. The DBT also provides three levels of boost to keep your ship powered even when input voltages sag by 35%.
The DBT features a compact and lightweight footprint. By providing an industry-recognized mounting pattern, it will fit as the perfect replacement for new construction or retrofit applications (direct replacement for the Charles Iso-Boost).
The DBT12/15 accepts any input voltage ranging from 167 V-270 V (47-70 Hz) and provides a Split phase 120/240V or 115/230 V output nominal. The DBT24 accepts nominal voltages of 230, 400V, and 480V - each with the same wide range – to provide a 115/230V Split phase output.
Features:
Drop-in replacement for the Charles Iso-boost
3 boosting levels utilizing a smart tap system
Lightweight and compact at 127lbs
Industry-recognized mounting pattern
The wide input range of 167-270 VAC
Parallelable for advanced applications
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
7250.00 |
|
|
DBT12 GEN2 Dock Boost Transformer
The smart isolation boosting transformer. The Dock Boost Transformer (DBT) provides precision voltage regulation to the vessel, delivering complete protection from the most common shore power problems, including brownouts, spikes, sags, and low-line or high-line voltage conditions from the dock power pedestal. The DBT also provides three levels of boost to keep your ship powered even when input voltages sag by 35%.
The DBT features a compact and lightweight footprint. By providing an industry-recognized mounting pattern, it will fit as the perfect replacement for new construction or retrofit applications (direct replacement for the Charles Iso-Boost).
The DBT12/15 accepts any input voltage ranging from 167 V-270 V (47-70 Hz) and provides a Split phase 120/240V or 115/230 V output nominal. The DBT24 accepts nominal voltages of 230, 400V, and 480V - each with the same wide range – to provide a 115/230V Split phase output.
Features:
Drop-in replacement for the Charles Iso-boost
3 boosting levels utilizing a smart tap system
Lightweight and compact at 127lbs
Industry-recognized mounting pattern
The wide input range of 167-270 VAC
Parallelable for advanced applications
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
7168.54 |
|
|
Isolation Transformer - 2000W - 115/230 VAC
Safety and prevention of galvanic corrosion The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarms.
Safety is taken for granted in case of a normal on-shore installation. A fuse will blow or a GFCI (Ground Fault Current Interrupter) will trip in case of a short circuit or current leakage to ground. Connecting the ground wire of the shore-side supply to the metal parts of the boat will result in galvanic corrosion (see below). Bringing only the live and neutral wire on board results in an unsafe situation because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat.
Galvanic corrosion occurs when two dissimilar metals in electrical contact are simultaneously exposed to an electrically conducting fluid. Seawater and, to a lesser extent, fresh water are such fluids. In general, the more active alloy of the couple corrodes preferentially while the less active (more noble) material is cathodically protected. The rate of galvanic corrosion is a function of several variables including area ratios, conductivity of the fluid, temperature, nature of the materials, etc.
It is a misunderstanding that galvanic corrosion occurs only in metal and aluminium hulls. In fact it can occur on any boat as soon as a metallic part (the shaft and propeller) is in contact with water. Galvanic corrosion will quickly dissolve your sacrificial anodes, and attack the shaft, propeller and other metal parts in contact with water as soon as the boat is connected to the shore-side supply. It might therefore be tempting not to connect the ground conductor: this is however extremely dangerous because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat.
The best solution to avoid galvanic corrosion and at the same time prevent any unsafe situation is to install an Isolation Transformer to connect to the shore-side supply.
The Isolation Transformer eliminates any electrical continuity between shore power and the boat. The shore power is fed to the primary side of the transformer and the ship is connected to the secondary. The Isolation Transformer completely isolates the boat from the shore ground. By connecting all metal parts to the neutral output on the secondary side of the transformer, a GFCI will trip or a fuse will blow in case of a short circuit.
Soft startis a standard feature of a Victron Energy isolation transformer. It will prevent the shore power fuse from blowing due to the inrush current of the transformer, which would otherwise occur
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
477.36 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 75'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 75'
Neutral Wire: No
Female End: Yes
Application: Isolation transformer cordset
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3621.65 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 100'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 100'
Neutral Wire: No
Female End: Yes
Application: Isolation transformer cordset
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3843.73 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 125'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 125'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3316.82 |
|
|
100 Amp 125/250V 3-Pole, 4-Wire Cordset - No Neutral Wire- One-Ended Male Only Power Supply - Blunt Cut - 100'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 125V/250V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers, male plug only power supply, and extension purposes
UL and ABYC approved components
Specifications:
Length: 100'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2551.39 |
|
|
100 Amp 125/250V 3-Pole, 4-Wire Cordset - No Neutral Wire- One-Ended Male Only Power Supply - Blunt Cut - 125'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 125V/250V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers, male plug only power supply, and extension purposes
UL and ABYC approved components
Specifications:
Length: 125'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3042.54 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 100'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 100'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2870.32 |
|
|
Oceanic Boutique 40" Dock Box
This dock box measures 40" X 21" X 19" and has one hasp for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
499.00 |
|
|
Oceanic Boutique 51" Dock Box
This dock box measures 51" X 22" X 24" and has one hasp for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
660.00 |
|
|
Oceanic Boutique 55" Dock Box
This dock box measures 55" X 22" X 24" and has one hasp for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
680.00 |
|