Class T Replacement Fuse - 400 Amp 400-amp replacement fuse for Samlex CFB2-400 fuse block assembly. Features: Individual 400-amp replacement fuse Applications: Inverter Accessories Specifications: Amps: 400 amps  Fuse: 400 A  Weight: 0.2 (lbs.) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in.) Dimensions: 7.6 x 3.2 x 3.2 (cm)

Class T Replacement Fuse - 200 Amp 200-amp replacement fuse for Samlex CFB2-400 fuse block assembly. Features: Individual 200-amp replacement fuse Applications: Inverter Accessories Specifications: Amps: 200 amps  Fuse: 200 A  Weight: 0.2 (lbs.) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in.) Dimensions: 7.6 x 3.2 x 3.2 (cm)

400A Class T Replacement Fuse Specifications: Individual Fuse Amps: 400A Fuse: 400A Weight: 0.2 (lbs) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in) Dimensions: 7.6 x 3.2 x 3.2 (cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

400A Class T Fuse Block Accessory Kit Specifications: Amps: 400 Amps Fuse: 400 Amps Weight: 1 (lbs) Weight: 0.45 (kg) Dimensions: 7 x 2 x 2.25 (in) Dimensions: 17.8 x 5.1 x 5.7 (cm) Applications: Inverter Accessories WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuse Block Class T 225-400 AMP Part #: 5502 Features: Maximum Voltage: 160 Volts DC Maximum Amperage: 400 Amperes DC Maximum Torque: 190 in-lb (21.47 Nm) max. Terminal Stud Size: 3/8"-16 (M10) Mounting Holes: Accept 1/4" (M6) Screw Maximum Cable Size 4/0 AWG Fuse Mounting Blocks: Tin-Plated Copper Class T Fuses Available: 110-400 Amperes DC  Fuse Sold Sepereatly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

400A Inverter Installation Kit f/3500W Inverter Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection. Specifications: Input: 2500-3500 Watts / 5000-7000 Watts Output: 12 V / 24 V Amps: 400 Amps Fuse: 400 Amps Weight: 17.5 (lbs) Weight: 7.93 (kg) Dimensions: *comes with 10ft of cable x 2 Warranty: 2 Year Limited Applications: The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Raymarine AIS4000 Class A Transceiver Designed for commercial vessels, luxury yachts, and SOLAS high-seas shipping, the AIS4000 Automatic Identification System (AIS) transceiver delivers robust Class A AIS network capability and is engineered to withstand the harsh weather, shock, and vibration of any vessel class. The AIS4000 boasts a high definition color display for quick access to integrated charts, alarms, and tracking. Additional support for wired and wireless networking with shipboard systems make AIS4000 a premier SOLAS and Inland Waterway-certified Class A transceiver.     RUGGED AND VERSATILE Designed for harsh conditions, AIS4000 is right at home on any vessel class. Certified to the highest industry standards for waterproofness, shock, and vibration Compact enclosure with NMEA2000 and NMEA0183 connectivity Junction box included for expanded shipboard sensor and ECDIS connectivity Flexible overhead, bulkhead, desktop, and surface mount options   BOLD, BRIGHT, AND HIGHLY CAPABLE The full-featured AIS4000 brings a new level of functionality to Class A transceivers. Large 5” 800 × 480 color display Integrated Wi-Fi NMEA 2000 Easy-to-use, intuitive interface   ADVANCED CLASS A AIS CAPABILITIES AIS4000 is a full-function Automatic Identification System transceiver certified for SOLAS and Inland Waterway applications. Fourth generation AIS technology for expanded speed, range, and processing performance Full color target display with optional C-MAP ENC mapping Integrated Man Overboard/PLB alerting and tracking system CPA/TCPA data and alarms Specials    Closeouts   Remanufactured    Rebates

Class T Fuse Holder with 2 Additional Studs 225-400A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options Class-T: 225-400 Amp WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Holder with 2 Additional Studs 450-600A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options Class-T: 450-600 Amp WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Block with Insulating Cover - 110 to 200A Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction Stud design ensures secure fuse mounting even with high heat Stainless steel studs provide resistance to corrosion and high torque One-piece stainless flange nuts ensure safe and secure connections UL 94-V0 base resists high heat Specifications: Cable Size: Up to 4/0 AWG Ignition Protected: Yes Maximum Amperage: 200A Maximum Voltage: 160V DC Fuse Mounting Block: Tin-Plated Copper Terminal Stud Size: 5/16"-18 (M8) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Block with Insulating Cover - 225 to 400A Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction Stud design ensures secure fuse mounting even with high heat Stainless steel studs provide resistance to corrosion and high torque One-piece stainless flange nuts ensure safe and secure connections UL 94-V0 base resists high heat Technical Specifications: Cable Size: Up to 4/0 AWG Ignition Protected: Yes Maximum Amperage: 320A Maximum Voltage: 160V DC Fuse Mounting Blocks: Tin-Plated Copper Terminal Stud Size: 5/16"-18 (M8) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint! As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power. The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power. Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to! This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels. Order the NXL-M4 for insane power out on the water! Features: Hardware resistant to corrosion and UV Protection Coated 4 Layers PCB to prevent corrosion IPX5 Water Resistance Grade High Level Input For Radio Use Front cover to keep the controls safe to the elements LED Clip Indicator to easier adjustment Stable and Reliable Class D Circuit Design Sound Quality Verification Using AP Instruments Direct Insert Power and Speaker Terminals Short Circuit, Thermal, and Voltage Protection Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz  2 Ohm RMS Power Per Channel - 4 x 230W  4 Ohm RMS Power Per Channel - 4 x 150W  4 Ohm RMS Power Bridge Channel - 2 x 440W  Signal-to-Noise Ratio - >90dB  Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7" *Sold as an Individual

Lynx Power-In Class-T M10 Terminals The Lynx Class-T Power In connects and fuses up to two strings of lithium batteries. It features a positive and negative busbar, connections for two Class-T fuses, and a connection to ground the DC system. The Class T-fuses, are available in 225A, 250A, 350A, and 400A (must be purchased separately). For installations using three or more strings of lithium batteries, use multiple Lynx Class-T modules. As a core component of the Lynx Distribution system, the Lynx Class-T seamlessly integrates with all other M10 Lynx products. The Lynx Distribution System The Lynx Distribution System is a modular busbar system that incorporates DC connections, distribution, fusing, and battery monitoring and/or lithium battery management.  The Lynx Distribution System Consists of the Following Parts Lynx Power In A positive and negative busbar with four batteries or DC equipment connections. Lynx Distributor A positive and negative busbar with four fused connections for batteries or DC equipment and fuse monitoring is available in two versions. Lynx Shunt VE.Can A positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device. Lynx Smart BMS For use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal. Available as a 1000A model with M10 busbars. Specifications Power: Voltage Range: 9 - 60Vdc Current Rating: 1000Adc continuous  Connections: M10 Busbar: 3/8” Physical: Enclosure Material: ABS Enclosure Dimensions (H x W x D): 279 x 169 x 97mm Unit Weight: 2.1 kg Busbar Material: Tinned copper Busbar Dimensions (H x W): 8 x 30mm Environmental: Operating Temperature Range: -40°C to +60° Storage Temperature Range: -40°C to +60° Humidity: Max. 95% (non-condensing) Protection Class: IP20 Please contact your dealer for any returns, repairs or support issues related to this product.

easyID Fuse 3 Amp easyID™ illuminated ATC® blade fuses use Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Replaces non illuminating ATO® or ATC® fuses Fast acting Two per retail package Specifications Amperage; 3A Interrupt Capacity: 1000A @ 32V DC Blade Material: tin-plated WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

easyID Fuse 5 Amp easyID™ illuminated ATC® blade fuses use Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Replaces non illuminating ATO® or ATC® fuses Fast acting Two per retail package Specifications Amperage; 5A Interrupt Capacity: 1000A @ 32V DC Blade Material: tin-plated WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.