|
1-In 4-Out Fused Distribution Block
The Roswell 3-in 4-out distribution block is everything a boat's audio system needs. Roswell distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire.
Features:
Fused style distribution block
(3) 1/0 input with a 4 AWG reducer
High-impact plastic base and cover
(4) 4 AWG outputs with 8 AWG reducers
Dimensions:
Length: 4.00 inches (10.16 cm)
Width: 3.25 inches (7.62cm)
Height: 1.3125 inches (3.33 cm)
|
65.46 |
|
|
1-In 2-Out Fused Distribution Block
Roswell's distribution blocks are machined out of solid brass alloy to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined brass inserts to accommodate multiple sizes of wire.
The Roswell 1-in-2-out distribution block is everything a boat's audio system has ever needed. Roswell's distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire.
Features:
Fused style distribution block
(1) 1/0 input with a 4 AWG reducer
High-impact plastic base and cover
(2) 4 AWG outputs with 8 AWG reducers
Dimensions:
Length: 4.00 inches (10.16 cm)
Width: 1.8125 inches (5.08 cm)
Height: 1.3125 inches (3.33 cm)
|
34.91 |
|
|
1-In 4-Out Ground Distribution Block
The Roswell 3-in 4-out distribution block is everything a boat's audio system needs. Roswell distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire.
Features:
Ground-style distribution block
(3) 1/0 input with a 4 AWG reducer
High-impact plastic base and cover
(4) 4 AWG outputs with 8 AWG reducers
Dimensions:
Length: 4.00 inches (10.16 cm)
Width: 3.25 inches (7.62cm)
Height: 1.3125 inches (3.33 cm)
|
71.58 |
|
|
1-In 2-Out Ground Distribution Block
Roswell's distribution blocks are machined out of solid brass alloy to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined brass inserts to accommodate multiple sizes of wire.
The Roswell 1-in-2-out distribution block is everything a boat's audio system has ever needed. Roswell's distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire.
Features:
Ground-style distribution block
(1) 1/0 input with a 4 AWG reducer
High-impact plastic base and cover
(2) 4 AWG outputs with 8 AWG reducers
Dimensions:
Length: 4.00 inches (10.16 cm)
Width: 1.8125 inches (5.08 cm)
Height: 1.3125 inches (3.33 cm)
|
40.72 |
|
|
Bosworth 1.25 Tapped Outlet Bronze
|
105.79 |
|
|
Bosworth 1.25 Tapped Outlet Aluminum
|
78.98 |
|
|
VFDB4 MANL 4 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.75 |
|
|
VFDB2 MANL 2 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to two (2) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG in to two (2) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and two (2) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.03 |
|
|
Wire Block - Tubular Rivet Head w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave Diameter
Wire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the wire termination
Features:
Flared cheeks to minimise chafing
Removable sheaves
Applications:
Wire blocks suit halyards, vang and backstay applications
Materials:
Grade 316 stainless steel cheeks
Nylatron® sheave
Specifications:
Sheave Ø: 45mm(1-3/4")
Max. Cable Ø: 6mm(1/4")
M.W.L:850kg(1,870lbs)
B.L.: 1,700kg(3,740lbs)
Weight: 88kg(3.1oz)
|
34.66 |
|
|
Bosworth 1.5 Aluminum Outlet Aluminum Fitting 1.5Npt
|
78.98 |
|
|
Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump
80gpm, 1-1/4" Outlet 3/4HP 3PH
|
5122.39 |
|
|
Ampco Bi8202801-4.50, Bronze Impeller for KC2
1 3/4
|
879.12 |
|
|
Scot Pump 189-001-157-4.50 IMPELLER 1.5HP 4.5"
|
139.23 |
|
|
Marine Amp Wiring Kit
In order to deliver the highest quality in sound and performance, Roswell has developed its own wiring accessories to join all of your Roswell Marine audio products together. Everything you need to install and connect two amplifiers (except the amplifiers themselves) is included in this package.
Includes:
(1) power fused distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out
15 ft. 4GA. satin charcoal ground wire – 105°C rated, tinned OFC full-spec copper
(1) power ground distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out
15 ft. 4GA. satin blue power wire – 105°C rated, tinned OFC full-spec copper
(1) inline fuse holder - 1/0 AWG in/out with 4 AWG reducers
10 ft. 18GA. frosted blue remote wire – tinned OFC full-spec copper
(1) 100 Amp mini ANL fuse
(2) 2-meter smoked jacket, quad shielded RCA cables
(2) 60 Amp mini ANL fuses
(2) RCA Y-Adapter (1F to 2M)
(1) 50 amp mini ANL fuse
(2) RCA Y-Adapter (1M to 2F)
(1) 80 amp ANL fuse
(12) 4" black cable ties
(1) 100 amp ANL fuse
(6) stainless steel 3.9 x 16mm screws
(1) 150 amp ANL fuse
(2) M8 washers (ID: 8.4mm, OD: 16mm)
(1) 4GA. brass terminal ring with black boot & M10 bolt
(1) 4GA. brass terminal ring with red boot & M10 bolt
*Does not include amplifier-to-speaker wiring
|
180.00 |
|
|
VPNB2 MANL 2 Position All-In-One Distribution Block with Cover
T-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse. This hefty little block distributes power from one (1) 1/0-gauge positive power cable to two (2) 4- to 8-gauge power leads, each routed through a mini-ANL fuse.
Then, the same block receives the amps' two ground wires and combines them for a single 1/0-gauge ground cable.
Fuses sold separately.
Features:
(2 positive) 1/0 to 4 AWG in to (2 positives) 4/8 AWG out
(1 negative) 1/0 to 4 AWG in to (2 negatives) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
Distribution block for both power and ground
Plastic cover (attached)
2 Rubber grommets and sleeves on power inputs (installed)
2 Rubber grommets and sleeves on power outputs (installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.53 |
|