1-In 2-Out Ground Distribution Block Roswell's distribution blocks are machined out of solid brass alloy to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined brass inserts to accommodate multiple sizes of wire. The Roswell 1-in-2-out distribution block is everything a boat's audio system has ever needed. Roswell's distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire. Features: Ground-style distribution block (1) 1/0 input with a 4 AWG reducer     High-impact plastic base and cover (2) 4 AWG outputs with 8 AWG reducers     Dimensions: Length: 4.00 inches (10.16 cm) Width: 1.8125 inches (5.08 cm) Height: 1.3125 inches (3.33 cm)

1-In 4-Out Ground Distribution Block The Roswell 3-in 4-out distribution block is everything a boat's audio system needs. Roswell distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire. Features: Ground-style distribution block (3) 1/0 input with a 4 AWG reducer     High-impact plastic base and cover (4) 4 AWG outputs with 8 AWG reducers     Dimensions: Length: 4.00 inches (10.16 cm) Width: 3.25 inches (7.62cm) Height: 1.3125 inches (3.33 cm)

1-In 2-Out Fused Distribution Block Roswell's distribution blocks are machined out of solid brass alloy to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined brass inserts to accommodate multiple sizes of wire. The Roswell 1-in-2-out distribution block is everything a boat's audio system has ever needed. Roswell's distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire. Features: Fused style distribution block (1) 1/0 input with a 4 AWG reducer     High-impact plastic base and cover (2) 4 AWG outputs with 8 AWG reducers     Dimensions: Length: 4.00 inches (10.16 cm) Width: 1.8125 inches (5.08 cm) Height: 1.3125 inches (3.33 cm)

1-In 4-Out Fused Distribution Block The Roswell 3-in 4-out distribution block is everything a boat's audio system needs. Roswell distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire. Features: Fused style distribution block (3) 1/0 input with a 4 AWG reducer     High-impact plastic base and cover (4) 4 AWG outputs with 8 AWG reducers     Dimensions: Length: 4.00 inches (10.16 cm) Width: 3.25 inches (7.62cm) Height: 1.3125 inches (3.33 cm)

Bosworth 1.25 Tapped Outlet Bronze  

Bosworth 1.25 Tapped Outlet Aluminum  

VFDB4 MANL 4 Position Distribution Block with Cover This compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused.   T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools.   Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.   Fuses sold separately.  Features: One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: One distribution block for mini-ANL fuses with one (1)  4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

VFDB2 MANL 2 Position Distribution Block with Cover This compact distribution block from T-Spec will handle the high-current power distribution for your single source to two (2) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused.   T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools.   Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.   Fuses sold separately.  Features: One (1) 1/0 to 4 AWG in to two (2) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and two (2) 4/8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bosworth 1.5 Aluminum Outlet Aluminum Fitting 1.5Npt  

Marine Amp Wiring Kit In order to deliver the highest quality in sound and performance, Roswell has developed its own wiring accessories to join all of your Roswell Marine audio products together. Everything you need to install and connect two amplifiers (except the amplifiers themselves) is included in this package. Includes: (1) power fused distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out     15 ft. 4GA. satin charcoal ground wire – 105°C rated, tinned OFC full-spec copper (1) power ground distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out     15 ft. 4GA. satin blue power wire – 105°C rated, tinned OFC full-spec copper (1) inline fuse holder - 1/0 AWG in/out with 4 AWG reducers     10 ft. 18GA. frosted blue remote wire – tinned OFC full-spec copper (1) 100 Amp mini ANL fuse     (2) 2-meter smoked jacket, quad shielded RCA cables (2) 60 Amp mini ANL fuses     (2) RCA Y-Adapter (1F to 2M) (1) 50 amp mini ANL fuse     (2) RCA Y-Adapter (1M to 2F) (1) 80 amp ANL fuse     (12) 4" black cable ties (1) 100 amp ANL fuse     (6) stainless steel 3.9 x 16mm screws (1) 150 amp ANL fuse     (2) M8 washers (ID: 8.4mm, OD: 16mm) (1) 4GA. brass terminal ring with black boot & M10 bolt     (1)  4GA. brass terminal ring with red boot & M10 bolt *Does not include amplifier-to-speaker wiring

VPNB4 MANL 4 Position All-In-One Distribution Block with Cover T-Spec designed VPNB4 distribution block to handle the high-current power and ground distribution for four (4) power sources, and protect them each with a mini-ANL fuse.  This hefty little block distributes power from one (1) 1/0-gauge positive power cable to four (4) 4 to 8 gauge power leads, each routed through a mini-ANL fuse.  Then, the same block receives the amps' two ground wires and combines them for a single 1/0 to 4 gauge ground cable. Fuses sold separately.  Features: (2 positive) 1/0 to 4 AWG in to (4 positives) 4/8 AWG out (1 negative) 1/0 to 4 AWG in to (4 negatives) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: Distribution block for both power and ground Plastic cover (attached) 3 Rubber grommets and sleeves on power inputs (installed) 2 Rubber grommets and sleeves on power outputs (installed) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

VPNB2 MANL 2 Position All-In-One Distribution Block with Cover T-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse.  This hefty little block distributes power from one (1) 1/0-gauge positive power cable to two (2) 4- to 8-gauge power leads, each routed through a mini-ANL fuse.  Then, the same block receives the amps' two ground wires and combines them for a single 1/0-gauge ground cable. Fuses sold separately.  Features: (2 positive) 1/0 to 4 AWG in to (2 positives) 4/8 AWG out (1 negative) 1/0 to 4 AWG in to (2 negatives) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: Distribution block for both power and ground Plastic cover (attached) 2 Rubber grommets and sleeves on power inputs (installed) 2 Rubber grommets and sleeves on power outputs (installed) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

VDB4 4-Position Distribution Block with Cover T-Spec designed their VDB4 distribution block to handle the high-current power distribution for four (4) power sources while keeping your wiring connected securely and looking neat.   You can also use this hefty little block to combine the ground wires of four (4) sources to a single grounding point.  Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather.  Features: One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate lock technology In the Box: Distribution block with one (1) 1/0 set-screw input and four (4) 4 or 8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed on input and outputs) Two 1/2" screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

VDB2 2-Position Distribution Block with Cover T-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (2) power sources while keeping your wiring connected securely and looking neat.   You can also use this hefty little block to combine the ground wires of two (2) sources to a single grounding point.  Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather. Features: One (1) 1/0 to 4 AWG into two (2) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate lock technology In the Box: Distribution block with one (1) 1/0 set-screw input and two (2) 4 or 8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed on input and outputs) Two 1/2" screws *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Series 45 Stand-Up Core Block - Swiveling Core Blocks™ are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Universal Bearing Dynamic and high static load performance The Ronstan Universal Bearing incorporates our proven 2-stage bearing system Stage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn’t perfect. Particularly important for cheek blocks Alloy Cheek Plates Block cheeks are manufactured from the highest quality alloy for maximum strength. Material optimization and the cut-away design minimizes weight and allows easy fresh water rinsing of salt and debris from the bearings.  Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimizing rope wear. Features: High dynamic and static load capacity Efficient 2-stage bearing system Ball bearings to counteract side thrust loads Class leading performance and sleek, contemporary styling Durable aluminium alloy cheek plates Central hub hole can be used as a becket take-off or tie-up point Features a strong cast padeye base with a swivel head post to allow full rotation and articulation Applications: Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 10M (33') Various control line applications on larger yachts Alloy sheave models are available for use with wire Materials: Sheave: U.V. stabilised Acetal Cheek body: Aluminium Alloy Ball Bearings: High compression strength carbon black Acetal Shackle, head post & hub: Grade 316 stainless steel