|
4078-20-ER 20' Extension Cable Kit for VHF, AIS, CB Antenna with RG-8x & Easy Route FME Mini-End
The cable that connects your antenna to your radio can make or break signal quality literally. Shakespeare offers a range of coaxial cables tailored to the needs of marine communications, and to withstand the rigors of the boating environment.
Features:
20' Length
White
|
56.99 |
|
|
PL-259-ER Screw-On PL-259 Connector for Cable with Easy Route FME Mini-End
Shakespeare offers an extensive line of marine grade connectors and adapters for antenna installations.
|
10.85 |
|
|
4' VHF/AIS White Antenna with 15' Cable
The 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies.
Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range.
Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed).
Features:
Designed for Digital AIS/VHF signals
4.5dBi Omni-directional gain
Rugged fiberglass rod with UV stable finish
Secure soldered connections
316 stainless steel base
1”x14 female threaded base
15’ premium low-loss RG-8X cable
Factory-installed mini-UHF connector
5-year warranty
Specifications:
Radiation: Pattern Omni-Directional
Gain: 4.5dBi
Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz)
Cable: 15’ Digital Antenna exclusive low loss RG-8X
Impedance: 50 ohms
Max Input Power: 50 watts
Exterior Finish: White polyurethane high gloss UV stable
Dimensions: 4’ length x 1” OD taper
Weight: 1.7 lbs
RF Connector: Mini-UHF female with included PL259 adapter
Installation: 1”x14tpi female threaded base
Elements: Brass - Hand soldered
Polarization: Vertical
Wind Rating: >160KPH
Operating Temp: 30º F to +175º F
Warranty: 5 Years
Compliance: Automatic Identification System (AIS)
Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations.
Applications:
Commercial
Recreational
Government vessels where AIS is required
|
232.70 |
|
|
20' Cable Kit for Phase III VHF/AIS Antennas - 2 Screw On PL259S & RG-8X Cable with FME Mini Ends Included
Easy Route Accessory - 20' cable kit for Phase III VHF/AIS antenna. 2 screw-on PL-259s and RG8X cable with FME mini-ends included.
|
60.35 |
|
|
598-SW-S 8' AIS Marine Antenna w/25' Cable
Designed to meet the exacting AIS frequency requirements and in conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 8' AIS antennas that provide a low 1.5:1.0 SWR ratio from 159-162 MHz. These 4.5dB gain AIS antennas offer unsurpassed durability and performance and are compatible with all AIS transponders.
Customers and installers love the easy installation connector system on the 500 GOLD Series antennas. Eliminate soldering with the factory-attached GOLD mini-UHF female connector. It requires only a 3/8" hole for cable routing and makes connecting to the radio simple with the provided screw-on adapter.
Made in the USA; assembled, tested and tuned by hand for superior performance and reliability.
Features:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
Mount: Standard 1"-14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 25' of low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
361.99 |
|
|
XT-20BL
20' transducer extension cable.
Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X102C, X107C DF, X125, X126DF, X135, X136DF, X52, X59DF
|
40.96 |
|
|
Flush Mount Kit f/VHF Radios & Small Displays
White powder coated stainless steel.
|
99.00 |
|
|
35' SRC-35 Extension Cable
For longer cables runs, pick the appropriate length Shakespeare SRC Series extension cable for your installation.
These cable kits must be run as a single piece and cannot be joined together.
Features:
Cable length - 35'
Pre-installed SMB and RNC connectors
Cable material - RG-58
Compatible with:
SRA-25 antenna
SRA-40 antenna
SRA-50 antenna
*Sold as an Individual
|
48.85 |
|
|
50' SRC-50 Extension Cable
For longer cables runs, pick the appropriate length Shakespeare SRC Series cable kit for your installation.
These cable kits must be run as a single piece and cannot be joined together.
Features:
Cable length - 50'
Pre-installed SMB and RNC connectors
Cable material - RG-58
Compatible with:
SRA-25 antenna
SRA-40 antenna
SRA-50 antenna
*Sold as an Individual
|
66.29 |
|
|
90' SRC-90 Extension Cable
For longer cables runs, pick the appropriate length Shakespeare SRC Series cable kit for your installation.
These cable kits must be run as a single piece and cannot be joined together.
Features:
Cable length - 90'
Pre-installed SMB and RNC connectors
Cable material - RG-58
Compatible with:
SRA-25 antenna
SRA-40 antenna
SRA-50 antenna
*Sold as an Individual
|
90.50 |
|
|
SPL2000 AIS-VHF Antenna Splitter
The SPL2000 allows the boat's VHF antenna to be used for both an AIS and VHF simultaneously. It uses ZeroLoss technology and is suitable for use with AIS Class B transponder systems as well as AIS receivers. It's also designed as a failsafe device with automatic priority given to the connected VHF. It is supplied with a BNC-BNC patch cable for the AIS and a PL259-PL259 cable for the VHF. It also features a AM/FM wired output for an on board stereo receiver. Identical in size to the AIT2000, it makes the perfect complimentary splitter device for Digital Yacht's range of AIS products.
|
335.95 |
|
|
Shakespeare Style 4352
AM/FM STEREO 10' EXTENSION CABLE KIT
This handy kit includes 93-ohm RG-62 cable with male and female Motorola connectors installed.
|
39.70 |
|
|
Antenna Cable Kit - 20M
Iridium's mast antenna cable - 20-Meter
Antenna cables for the Iridium passive Mast Antenna. The cable is made of high quality LMR 240 and each end of the cable has a male TNC connector. The Iridium Mast Antenna is sold separately. These cables cannot be used with active antennas.
Installation and Weather Proofing: During installation, be very careful to avoid sharp bends in the coaxial antenna cable which increase signal loss. It is important to weatherproof the exposed connectors between the Mast Antenna and the antenna cable. This prevent moisture and salt water intrusion into the connection which can cause corrosion. For most applications, we recommend Coax-Seal Tape (hand moldable plastic) as a reliable weatherproofing product.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
330.00 |
|
|
Antenna Cable Kit - 10M
Iridium's mast antenna cable - 10-Meter
Antenna cables for the Iridium passive Mast Antenna. The cable is made of high quality LMR 240 and each end of the cable has a male TNC connector. The Iridium Mast Antenna is sold separately. These cables cannot be used with active antennas.
Installation and Weather Proofing: During installation, be very careful to avoid sharp bends in the coaxial antenna cable which increase signal loss. It is important to weatherproof the exposed connectors between the Mast Antenna and the antenna cable. This prevent moisture and salt water intrusion into the connection which can cause corrosion. For most applications, we recommend Coax-Seal Tape (hand moldable plastic) as a reliable weatherproofing product.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
233.33 |
|
|
Antenna Cable Kit - 15M
Iridium's mast antenna cable - 15-Meter
Antenna cables for the Iridium passive Mast Antenna. The cable is made of high quality LMR 240 and each end of the cable has a male TNC connector. The Iridium Mast Antenna is sold separately. These cables cannot be used with active antennas.
Installation and Weather Proofing: During installation, be very careful to avoid sharp bends in the coaxial antenna cable which increase signal loss. It is important to weatherproof the exposed connectors between the Mast Antenna and the antenna cable. This prevent moisture and salt water intrusion into the connection which can cause corrosion. For most applications, we recommend Coax-Seal Tape (hand moldable plastic) as a reliable weatherproofing product.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
263.99 |
|