|
40W Loud Hailer Horn with Swivel Bracket
Gets your point across with up to 40 watts power handling capacity. This speaker also supports a loud-hailer listen-back function. It is made of high impact white plastic and includes a tilt mount bracket.
Features:
Measures 7″ wide x l3″ deep
8-ohms, 40 Watts @ 400 Hz
Frequency Response: 250 Hz to 8 KHz
Operating temperature range: –40 to +176 degrees F (–40 to +80 C)
|
115.69 |
|
|
VLH-3000A 30W Dual Zone PA/Loud Hailer/Fog w/Listen Back & 2 Optional Intercom Stations
Features:
30W PA/Hailer output with Listen Back
Dual Zone - Forward, Aft or Both
6 Preprogrammed Fog Signals: Underway, Stop, Sail, Tow, Anchor and Aground
Horn and Siren
Noise canceling microphone with dedicated CALL, IC1 and IC2 keys
Compatible with MLS-300 and MLS-310 (10W amplified) external audio speakers
Compatible with optional MLS-300i intercom speaker with Push-to Alert button for IC1 and IC2
Flush Mount capable with optional MMB-84
Adjustable Backlight
3 Year Waterproof Warranty
|
336.47 |
|
|
15W 4-Ohm 5" Loud Hailer Speaker with Bracket & Talkback - White
Shakespeare marine speakers are rated from 5W to 40W power, covering radio output and hailer/listen-back applications. All are engineered to withstand the rigors of the marine environment.
HS-5A Hailer Horn Speaker is made with a durable plastic weather-proof construction. 5” with 15 watts, this hailer is compact but efficient.
Specifications:
Size: 5"
4-Ohm
Max Power: 15W
|
35.69 |
|
|
Intercom Speaker for VLH-3000A Loud Hailer - White
Redesigned for clear, crisp and audible reception, the Standard Horizon MLS-410LH Intercom Speaker acts as a secondary speaker/PA for receiving and transmitting, via the Push To Alert (PTA) button, with the VLH-3000A Loud Hailer.
Compatible With:
Standard Horizon VLH-3000A Loud Hailer
Features:
Flush or bracket mounted
Compact size
Weather-resistant
Technical Specifications:
Speaker Cable Length - 6.5' (2 M)
Dimensions (Diameter) - 5"
Maximum Power - 10 Watts
Speaker Impedance - 4 Ohm
In the Box:
Speaker w/speaker wire
Mounting bracket
Instruction manual
*Sold as an Individual
|
53.99 |
|
|
Intercom Speaker for VLH-3000A Loud Hailer - Black
Redesigned for clear, crisp, and audible reception, the Standard Horizon MLS-410LH Intercom Speaker acts as a secondary speaker/PA for receiving and transmitting, via the Push To Alert (PTA) button, with the VLH-3000A Loud Hailer.
Compatible With:
Standard Horizon VLH-3000A Loud Hailer
Features:
Flush or bracket mounted
Compact size
Weather-resistant
Technical Specifications:
Speaker Cable Length - 6.5' (2 M)
Dimensions (Diameter) - 5"
Maximum Power - 10 Watts
Speaker Impedance - 4 Ohm
In the Box:
Speaker w/speaker wire
Mounting bracket
Instruction manual
*Sold as an Individual
|
53.99 |
|
|
40mm Carbo Block Single with Swivel & Bracket
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.
Features:
Sheave Ø (mm): 40 mm
Sheave Ø (in): 1-9/16 in
Maximum line Ø (mm): 10 mm
Maximum line Ø (in): 3/8 in
Maximum working load (kg): 220 kg
Maximum working load (lb): 485 lb
|
34.08 |
|
|
Center Swivel Bracket - 2-1/2"
Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets.
Features:
Bolt-on installation
Bunk flange holes 3/8" dia.
Bunk flange 1-3/8" x 3-1/2"
Swivel flange hole 1/2" dia.
Swivel flange 2" tall x 3-1/2"
2-1/2" bunk flange hole centers
11 gauge galvanized steel
Made in the USA
Sold individually
|
1.88 |
|
|
Center Swivel Bracket - 2"
Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets.
Features:
Bunk flange holes 3/8" dia.
Bunk flange 1-3/8" x 3-1/2"
Swivel flange hole 1/2" dia.
Swivel flange 2" tall x 3-1/2"
2" bunk flange hole centers
11 gauge material
Sold individually
|
1.88 |
|
|
Swivel Bracket Assembly - 8" Bracket
This Smith adjustable bracket is designed to support bunk boards. Hot dip galvanizing for years of use in the harsh marine environment.
This bracket assembly uses bolster bracket-10100G and swivel bracket-10200G.
Features:
Bolster bracket: 8" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 2-3/4"
Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2"
Overall assembly length is 9"
|
7.52 |
|
|
Swivel Bracket Kit
Galvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.
Swivel Brackets for mounting Bunk Boards to Bolster Brackets.
Features:
Bunk flange holes 3/8" dia.
Bunk flange 1-3/8" x 3-1/2"
Swivel flange hole 1/2" dia.
Swivel flange 2" tall x 3-1/2"
2-1/2" bunk flange hole centers & 1 hole centered
10 gauge material
*Sold as kit with (2) brackets, (2) 7/16" x 1" head cap screws, and (2) 7/16" nylon lock nuts.
|
6.60 |
|
|
Loud Hailers
Load Hailers from Standard Horiziom, Furuno and Megaphones
|
|
|
|
|
|
Swivel Base Rod Holders
RH570XL
Stainless Steel Side Mount w/ Swivel Base Extra Long
This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
230.77 |
|
|
Drop-In Hidden Horn w/ Black and White Covers
Low profile drop in horn with grills. Design allows easy installation. Easily retrofitted. Comes with black and white cover. 12V. Designed for ABYC standards for boats up to 20 meters.
|
31.67 |
|
|
Swivel Base Rod Holders
RH570
Stainless Steel Side Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder.
|
210.00 |
|