2.4 GHz Wi-Fi Marine Antenna - 4' Getting and staying connected on the water has never been easier. Digital Antenna's 2.4GHz premium quality 10dB gain omni-directional antennas achieve optimal signal range on 802.11 b/g wireless LANs, Bluetooth and multipoint radio equipment where high gain and wide coverage is desired. Features: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 10dB gain Mount: Standard 1"-14 threaded base Connector: Male Cable: Not included - use our PowerMax™ low loss antenna cables This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

528-VW 4' VHF Antenna with 15' Cable - White Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of Digital's antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. Features: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4.5dB gain 500 GOLD Series: Mount: Standard 1"14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 15' of Digital's low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AIS Antennas 4' Length, 4.5dB Gain In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the AIS transponder easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. All 4' AIS Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4.5dB gain 500 GOLD Series Mount: Standard 114 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 25 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AIS Antennas 4' Length, 4.5dB Gain In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the AIS transponder easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. All 4' AIS Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4.5dB gain 500 GOLD Series Mount: Standard 114 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 25 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

VHF Antenna 4.5dB Gain Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. 4' VHF Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4dB gain 500 GOLD Series: Mount: Standard 1"14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 15 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AIS Antennas 4' Length, 4.5dB Gain In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. All 4' AIS Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4.5dB gain 800 GOLD Series Mount: Stainless steel double female ferrule for mounting 114 threaded base Connector: Quality female SO-239 (UHF female) Cable: Not included use our VHF/AIS cables and two DA645 connectors This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AIS Antennas 4' Length, 4.5dB Gain In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. All 4' AIS Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4.5dB gain 800 GOLD Series Mount: Stainless steel double female ferrule for mounting 114 threaded base Connector: Quality female SO-239 (UHF female) Cable: Not included use our VHF/AIS cables and two DA645 connectors This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4' Cellular Antenna Digital Antenna's 1100 series antennas with a collet ferrule ensure no cable twisting and allows the antenna to be removed when needed. This new technique allows the use of existing coax or a new run of premium low loss cable. A taperedcollet securely locks Digital Antenna's 1100 series antenna to the bottom ferrule which mounts standard 1"-14 threads. All marine antennas are manufactured in the USA with 316 surgical stainless, UV stable high gloss finish and precision soldered components. Features: Sleek, rugged design Locking collett allows antenna to be attached without twisting cable Large connector pass thru Mounts to standard 1"-14 mount or mount with U-bolt to a pole This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

826-VW 4' VHF Antenna - White Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years. All of Digital's antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. Features: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4.5dB gain 800 GOLD Series: Mount: Stainless steel double female ferrule for mounting 1"14 threaded base Connector: Quality female SO-239 (UHF) Cable: NOT Included Use Digital's VHF/AIS cables and 2-DA645 connectors This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WindSense - Wi-Fi Wireless Wind System WindSense is a wireless wind system designed to allow iPads, tablets, SmartPhones and PCs to display accurate apparent wind speed and direction. It features a high quality, precision mast head sensor with 20m cable that connects to a below decks interface unit providing a wifi and NMEA 0183 wired connection. Existing NMEA compatible sensors can also be connected to the NMEA input to allow the wireless network to share other available on board instrument data. It's compatible with a wide range of apps for iOS and android. The built in wifi will typically footprint a GRP boat up to 30m. Features: Stand alone or networkable (via NMEA 0183) wind system with precision mast head unit Wired connection with super-thin cable from MHU to below deck interface with wireless WiFi and wired NMEA connections Ultra tough Igildur™ mast head unit bearings for exceptional life and corrosion resistance Full range of apps for iOS & Android plus compatible with multiple PC and MAC apps Support for up to 7 Wi-Fi connected devices - use multiple smart phones, iPads or tablets as a display at the helm, chart table or on deck NMEA 0183 output NMEA 0183 (4800 or 38400 baud) input with multiplex facility for WiFi connection Wi-Fi can be standalone or joined to existing network Minimal power consumption Optional NMEA 2000 interface Installation is easy with an ultra thin mash head unit cable with removable connector which plugs directly into the interface unit.

4' VHF/AIS White Antenna with 15' Cable The 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies. Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range. Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed). Features: Designed for Digital AIS/VHF signals 4.5dBi Omni-directional gain Rugged fiberglass rod with UV stable finish Secure soldered connections 316 stainless steel base 1”x14 female threaded base 15’ premium low-loss RG-8X cable Factory-installed mini-UHF connector 5-year warranty Specifications: Radiation: Pattern Omni-Directional Gain: 4.5dBi Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz) Cable: 15’ Digital Antenna exclusive low loss RG-8X Impedance: 50 ohms Max Input Power: 50 watts Exterior Finish: White polyurethane high gloss UV stable Dimensions: 4’ length x 1” OD taper Weight: 1.7 lbs RF Connector: Mini-UHF female with included PL259 adapter Installation: 1”x14tpi female threaded base Elements: Brass - Hand soldered Polarization: Vertical Wind Rating: >160KPH Operating Temp: 30º F to +175º F Warranty: 5 Years Compliance: Automatic Identification System (AIS) Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations. Applications:  Commercial Recreational Government vessels where AIS is required

MAXLiNK 4G Multi-Carrier Communicator E-SIM Select Router Experience the most reliable cellular data networks through multiple carrier access in North America and the Caribbean. On-demand, always searching, minimal signal loss for better performance and connectivity to your vessel's security and surveillance systems while utilizing four major cellular carriers on one device that automatically switches between providers for the best possible cellular data connection and throughput. Its automatic multicarrier failover capability with faster speeds provides overlapping coverage due to combined networks and has created the most expansive footprint available on the market. Simple, plug-and-play with no APN programming makes installation easy and can also be configured for international capabilities. MAXLiNK is a multi-functional wireless 4G LTE with Cat.7 & Cat.13 capabilities and Wi-Fi, providing LTE through MCS technology. Hardware: Mobile 4G/LTE (Cat 7 & Cat 13) Main CPU RTL8197FH-VG5-CG Memory 128MB Buttons Reset, WPS SIM Micro SIM Slot Antennas 4 Wi-Fi External Antennas (2 x 2.4GHz; 2 x 5.8GHz); 2 External LTE Antenna Ethernet Ports LAN - 4 x RJ45 10M/100M/1000M; WAN - 1 x RJ45 10M/100M/1000M MIMO 2*2 MU-MIMO Led Power Indicator LED; VSIM Indicator; LTE Indicator;2.4GHz Wi-Fi; 5.8GHz Wi-Fi; SIM Indicator; Signal LED (3 LED); WAN/LAN LED Temperature Working: 0°C40°C; Storage: -30°C 70°C Shell Material Metal Dimensions 180*130*30mm Weight < 1500 g (including packaging) Software: Configuration Handover between Physical SIM and MCS Local WEB GUI Manage the CPE device Debug Mode RSSI level; Packet error rate; CINR; Dynamic Tx power; Modulation Encryption/Decryption AES; SNOW3G; NULL Power Control DL Power Control; UL Power Control Admin management Admin setting change; Device reboot, reset; Gateway setting Device Info Device model LTE module ID version SN; Vendor info SIM carrierï¼›connection statusï¼›Device timeï¼›IP addressï¼›connection time Software update Sending and receiving messages; Language setting TDD Bands FOTA and local update FDD Bands B34/B38/B39/B40/B41 WCDMA Bands B1/B2/B3/B4/B5/B7/B8/B12/ B13/B17/B18/B19/B20/B25/ B26/B28/B29/B30/B66/B71 B1/B2/B4/B5/B8

532-VW-S 16' Antenna - White 10dB Gain A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antennas 16 VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable. Our 16' VHF antennas require a side support 3' to 4' from the base of the antenna. All 16' VHF Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 10dB gain 500 GOLD Series: Mount: Standard 1"14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 20 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

532-VW-RS 16' White VHF f/RUPP Mounts 10dB Gain ** Designed to be used with RUPP Antenna Mounts ** A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antenna's 16' VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations. Customers and installers love the 500 GOLD Series' easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable. 16' VHF antennas require a side support 3' to 4' from the base of the antenna Features: Pre-installed RUPP collar Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 10dB gain Cable: Includes 20’ of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable Mount: Standard 1"–14 threaded base (RUPP support arm required) Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

529-VW-S 8' VHF Antenna - White 6dB Gain Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. 8' VHF Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 6dB gain 500 GOLD Series: Mount: Standard 1"14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.