Shakespeare Style 4700-1 Extension Mast Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 1' long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive

Shakespeare Style 4700-2 24" Extension Mast Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 2' long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive

Circlip Extension 1-1/8" Stainless Steel - 3100-112-SS2 Features: 1-1/8" Stainless Steel

SS60-SLTD/12 Stainless Steel Transducer If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/12 will accommodate a deadrise angle between 8° and 15°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation. Features: 600 Watts 50/200 kHz 45/12 degree Beam Angles Stainless Steel Thru Hull with Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

12" Stainless Steel Gimbal Mount Allows mounting of Cannon downriggers in flush mount rod holders 316 stainless steel Polished to a mirror finish Resists rusting pitting and corroding

556TID-LTD/12 Stainless Steel Thru-Hull 1kW - 12° Tilted Furuno's Stainless Steel Thru-Hull Transducer, 1 kW (10 Pin), 12-degree Tilted Element.  Airmar SS164 Housing Style Transducer. If a thru-hull flush-style, stainless steel transducer is called for, the 12-Degree Tilted Element 556TID-LTD/12 will accommodate a deadrise angle between 8° and 15°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation. Features: 1kW 50/200 kHz 20/6 degree Beam Angles Stainless Steel Thru Hull with Temperature 30 Foot Cable with 10-Pin Connector This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

xSonic SS175H-W/12 Stainless Steel Thru-Hull Transducer - 12° - 9-Pin The SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.  Features: 130-210 kHz High CHIRP with wide 25° beam for excellent fish targets  Up to 310M (1000') range with High CHIRP 1 internal broadband ceramic Thru-hull with stainless steel housing Suitable for fiberglass and wood hulls Ideal for sportfishing and commercial vessels up to 8M (25') Recommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays

BS-12 Stainless Steel Basket - 3.1" x 11.9" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-3015

Washer Flat M8 x 17 x 1.2mm - Stainless Steel 304 Features: Washer Flat M8 x 17 x 1.2mm Stainless Steel 304

Circlip - 1-1/2" Stainless Steel 1-1/2" Stainless Steel

1-1/4" Stainless Steel Extra Long Thru-Hull Fitting w/Nut  Features: Extra long NPSM / NPT combination thread #316 Stainless Steel

1-1/2" Stainless Steel Extra Long Thru-Hull Fitting w/Nut  Features: Extra long NPSM / NPT combination thread #316 Stainless Steel

1" #316 Stainless Steel NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models

1" NPT x 1" ID Stainless Steel Pipe to Hose Straight Fitting  Features: Male NPT x Hose connection #316 Stainless Steel Sizes from 1/2" to 3" Standard Flow NSF-61 compliant Suitable for use in potable water systems

MegaPress 1" 90° Stainless Steel 304 Elbow Street - Press Connection - Smart Connect Technology Features: 304 stainless steel Press connection, street Components: FKM sealing element