|
Style 396-1 VHF 3dB
Center-fed 1/2-wave coaxial sleeve
Outstanding, basic 3dB antenna designed to reduce signal fading in rough seas. This is probably the most widely used antenna on Coast Guard vessels.
Brass and copper elements
Chrome-plated brass ferrule with standard 1-14 thread
Includes 15' RG-58 cable and a PL-259 connector
Suggested mount: Style 4187 Ratchet Mount
One section
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
(within 2.0:1 SWR): 5 MHz
SWR:
1.5:1 at 156.8 MHz
Impedance
(Ohms): 50
Gain:
3 dB
Max Input (Watts):
50
DC Ground:
NO
Termination:
15' RG-58 cable
Height (feet):
5
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
164.71 |
|
|
Shakespeare Style 396-1-AIS VHF Marine AIS
4' LENGTH 3dB
4' MAST MOUNT AIS ANTENNA
The 396-1-AIS has been specially designed to meet the broader bandwidth requirements of all popular AIS transceivers. Commercial-grade construction with a mast mounting sleeve.
Brass and copper elements
SO-239 connector at the base
Suggested Mount: U-Bolts included. Can be strapped to a larger mast using steel banding (not supplied)
One section
Coax cable sold separately
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency: VHF Marine Band
Bandwidth within 2.0:1 SWR: 6.0 MHz
SWR: 1.5:1 at 156.8 MHz
Gain: 3dB
Impedance (Ohms): 50
Gain: 3dB
Max. Input (Watts): 100
DC Ground: no (will read open-circuit with ohmeter test)
Termination: SO-239 at bottom of antenna
Height (feet): 4
Polarization: Vertical
Radiation pattern: Omni-directional
|
179.56 |
|
|
Bosworth 1.5 Inch Threaded Inlet Bronze
|
89.02 |
|
|
Bosworth 1.5 Inch Threaded Oulet Bronze
|
101.73 |
|
|
Shakespeare Style 5206-N VHF Marine - Reduced Length Version
8' LENGTH 6dB
END-FED WITH MATCHING STUB
Same as the Style 5206-C, but the 5206-N has a nylon ferrule.
An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor.
Quality copper cable elements for good range and efficiency
Nylon ferrule with standard 1"-14 thread
Includes 15' RG-58 cable and a PL-259 connector
Suggested mount: Shakespeare Style 495 Lift-n-Lay Mount or Style 4186 Ratchet Mount
Twin to: Shakespeare Styles 5205 and 5207 CB Marine antennas
One section
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
3 MHz
SWR:
1.5:1 @156.8 MHz
Impedance:
(Ohms): 50
Gain:
6 dB
Max Input (Watts):
50
DC Ground:
NO - the antenna will read "open circuit" when checked with an ohm meter or continuity tester.
Termination:
RG-58
Height (feet):
8
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
75.17 |
|
|
5101 8' Classic VHF Antenna with 15' Cable - Reduced Length Version
END-FED WITH MATCHING STUB
A standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that wont turn yellow in the sun. This antenna delivers not only performance, but superb value.
Features:
Brass and copper elements
Chrome-plated brass ferrule with standard 1"-14 thread
Includes 15' RG-58 cable and a PL-259 connector
Suggested mount: Shakespeare Style 4187 Ratchet Mount, or use a Shakespeare Style 410-R Mounting Kit plus a Style 4008 Extension Mast to form a 16' antenna system
One section
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency: VHF Marine Band
Bandwidth: (within 2.0 1 SWR): 5 MHz
SWR: 1.5:1 at 156.8 MHz
Impedance: (Ohms): 50
Gain: 6 dB
Max. Input (Watts): 50
DC Ground: YES - however, the antenna will read "open circuit" when tested with ohmeter.
Termination: 15' RG-58 cable
Height (feet): 8'
Polarization: Vertical
Radiation pattern: Omni - directional
|
84.59 |
|
|
THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
Shakespeare Style 4018-M VHF Marine
19' LENGTH, 9dB
PHASED 1/2-WAVE ELEMENTS IN A COLLINEAR ARRAY WITH A COAXIAL CHOKING SLEEVE TO SUPPRESS CABLE RADIATION
Same as Style 4018 with a special sleeve for mast mounting. Used primarily for land-based stations and on commercial vessels.
The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight.
Brass and copper elements
Chrome-plated brass mid section ferrules and aluminum sleeve bottom ferrule
SO-239 connector at base
Suggested mount: Mast mount using supplied 1-1/3" U-bolts. The 4018-M can be strapped to a larger mast if steel banding (not supplied) is used.
Two sections: Base 162"; Tip 66":
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
VHF Marine band
Bandwidth:
(within 2.0:1 VSWR) 3 MHz
SWR:
1.5:1 at 156.8 MHz
Impedance:
(ohms): 50
Gain:
9 dB
Max Input (Watts):
25
DC Ground:
NO
Termination:
SO-239
Height (feet):
19
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
477.52 |
|
|
Galaxy 6.5' Broadband Antenna
6.5 ft. Broadband
136-174 MHz Broadband
The HS 2774-1 is a highly sophisticated antenna with performance maximized from 136 to 174 MHz. It will handle continuous duty at maximum input power. The self-supporting antenna is designed for military, commercial, law enforcement, and disaster preparedness. No tuning or ground plane required.
Features:
and soldered brass elements for maximum range and efficiency
Stainless steel ferrules, standard 1in-14 threads
Includes 20 feet of RG-8/X low-loss cable plus a PL-259 connector
Suggested mount: Use only Shakespeare Style 4187-HD for self-supporting applications. Use a Style 410-R if an upper support bracket installation is preferred.
Covers: 136-174 MHz
One section
Includes FME Cables
|
534.82 |
|
|
Bosworth 1.5 Aluminum Inlet Aluminum Fitting 1.5Npt
|
93.55 |
|
|
Bosworth 1.5 Aluminum Outlet Aluminum Fitting 1.5Npt
|
78.98 |
|
|
Fill-Rite 901-N-1 1/2 901 Meter Nickel Plated 1.5
Fill-Rite Flow Meter 6-40GPM 1 1/2"FNPT Ports
|
548.25 |
|
|
6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain
Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds.
Features:
Silver-plated outer conductor, copper inner conductor
• Stainless steel mounting sleeve
• Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage
• Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit
• Two sections: Base 110″, Tip 110″
Specifications:
Design: Collinear-phased 1/2-wave elements with choking sleeve
Height: 18' (5.48m)
Weight: 20lbs (9kg)
Gain: 8dB
Connector Type: SO-239
Suggested Mounting: 409-R or 410-R
Impedance: 50 ohms
Max Input Power: 150W
DC Grounding: No
Shakespeare Limited Warranty: 8 years
|
797.74 |
|
|
476 18.5' Classic VHF Antenna
*THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
The Shakespeare 476 antenna is a one-section, phased 1/2-wave collinear array, commercial VHF 10dB marine antenna. Designed to get the message through when all others fail, this unique antenna puts the signal on the horizon, providing gain in all directions. For heavy-duty seagoing applications, such as workboats, tugs, tital well service boats, etc. The reduced-length version (now 18'5") has been shortened to maintain performance while making it easier to ship both internationally and domestically.
Built for value without compromising performance or durability, the Classic Series covers the widest variety of vessels in the Shakespeare® family. These antennas keep you connected and meet essential communication needs while offshore.
Features:
Brass and copper elements provide a standard range and reception
Chrome-plated brass or nylon ferrule with standard 1: -14 thread provides for a basic install
Smooth, durable, high-gloss white/fiberglass finish prevents yellowing
VSWR of <1.5:1 at 156.8 MHz
Utilizes 15’ RG 58 cable, PL-259 connector type, unless otherwise noted below*
2-year warranty
Specifications:
Frequency: VHF Marine band
Bandwidth: (within 2.0:1 SWR): 10 MHz
SWR: 1.5:1 at 156.8 MHz
Impedance (ohms): 50 ohms
Gain: 10 dB
Max Input (Watts): 350W
DC Ground: Yes - Read Shorted
Termination: SO-239 connector
Height (feet): 18.5'
Polarization: Vertical
Radiation Pattern: Omni-directional
Suggested Mount: 483 Mast Bracket
|
1020.06 |
|
|
6500-WB 4FT Broad Band VHF Antenna 3dB
Built for maximum performance, this 4’ broad band antenna is designed to endure the harsh environment and communication requirements in commercial, law enforcement and disaster management applications. Whether you install it on a vessel, base station, or a stationary platform, this antenna provides a host of mounting options to fit your need. No tuning or ground plane required. Cable not included.
Features:
Stainless steel mounting bracket: corrosion resistant even in marine environments.
Patent pending mount design: install the U-bolts without removing hardware – no more lost hardware
Detachable antenna: handle mounting bracket easily without the weight of the antenna. Mount it on a large variety of Shakespeare® mounts with a 1”-14 thread*
IP67**, high wind rating, wide temperature range, and PU Coating: built to last in rain, sun, ice, dust, water splashes and even corrosive marine environments
*Requires a Shakespeare 4006 double female ferrule (not included).
**When installed as instructed.
|
228.83 |
|
|
PHASE III 6396-AIS-R 4' AIS Antenna 3dB Gain
Specially engineered for the extra bandwidth required by AIS transceivers, this Phase IIIT antenna enables reliable communication over marine VHF frequencies.
Silver-plated outer conductor, copper inner conductor
Stainless steel mounting sleeve
SO-239/PL-259 connector
Specifications
Max. Power Input: 50 watts
SWR: Less than 1.5:1 at 162 MHz
Bandwidth: 5 MHz within 2.0:1 VSWR
Frequency: VHF AIS Marine Band
DC Grounding: Yes
Pattern: Omnidirectional
Polarization: Vertical
|
419.10 |
|