M510 PLUS VHF Marine Radio with AIS  Stay in touch from anywhere in the boat with the M510 Plus fixed mount Marine VHF Radio with AIS.  Icom’s Class D DSC fixed mount VHF Marine Radio with AIS receive capability.  The M510 Plus is nearly half the depth of the M506, allowing installation in more confined spaces.  The large color display has a simple user interface allowing casual and serious boaters alike with plenty of options to communicate.  Use the RS-M500 app (for iOS™/Android™) to remotely control the M510 through WLAN.  Up to three smart devices can be used as a wireless microphone or remote controller in substitute for the COMMANDMIC™. With its integrated AIS receiver, the IC-M510 Plus can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen. Intercom function between your smart device and the radio is also available.   Features: Large color display - 3.5" TFT LCD S-M500 app ( iOS® or Android™) allows you to connect three (3) smart devices to function as a wireless command speaker/microphone Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS Technical Specifications: Output Power - 25W Frequency Range - Transmit - 156.025 to 157.425 MHz Frequency Range - Receive -  156.050 to 163.275 MHz  Waterproof Rating - IP68 GPS - Built-in WLAN - Built-in Connectivity - NMEA 0183 (NMEA 2000™ with the addition of the CT-M500) Features: Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS In the Box: M510 Plus VHF radio with AIS Speaker microphone (HM-250RB) DC Power cable Microphone hanger Mounting bracket kit Instruction manual  *Sold as you Individual

M510 EVO VHF with AIS & NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver is integrated in the M510 PLUS EVO 51 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Integrated AIS Receiver* With its integrated AIS receiver*1 or external NMEA sentence*2, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen. *1 AIS receiver is not included, depending on the transceiver version. *2 Optional MA-510TR or third-party AIS receiver/transponder. Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.

M510 EVO VHF with NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver not included in the M510 EVO 41 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.

M510 VHF Marine Radio Icom’s Class D DSC fixed mount VHF marine transceiver, the M510 is a tech-laden powerhouse.  The M510 is nearly half the depth of the M506, allowing installation in more confined spaces.  The large color display has a simple user interface allowing casual and serious boaters alike with plenty of options to communicate. Use the RS-M500 app (for iOS™/Android™) to remotely control the M510 through WLAN.  Up to three smart devices can be used as a wireless microphone or remote controller in substitute for the COMMANDMIC™. Intercom function between your smart device and the radio is also available.   Features: Large color display - 3.5" TFT LCD S-M500 app ( iOS® or Android™) allows you to connect three (3) smart devices to function as a wireless command speaker/microphone Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS Technical Specifications: Output Power - 25W Frequency Range - Transmit - 156.025 to 157.425 MHz Frequency Range - Receive -  156.050 to 163.275 MHz  Waterproof Rating - IP68 GPS - Built-in WLAN - Built-in Connectivity - NMEA 0183 (NMEA 2000™ with the addition of the CT-M500) In the Box: M510 VHF radio Speaker microphone (HM-250RB) DC Power cable Microphone hanger Mounting bracket kit Instruction manual  *Sold as you Individual

25W Commercial Grade Fixed Mount VHF with NMEA 2000 & Integrated AIS Receiver NMEA 2000 Plug and play NMEA 2000 interface. The integrated NMEA 2000 supports all PGN's for Navigation, GPS, AIS and DSC function. Simply plug the NMEA 2000 into your existing network to complement your system with full VHF and DSC features. Wireless Second Station RAM4W capability Wirelessly control all radio functions of the GX6000 with the interface of the RAM4W wireless Remote Access Microphone. Using the SCU-30 Wireless Access Point plugged into the back of the radio, you have the capability of syncing up to 4 RAM4W units. With an operating range of up to 65 feet, the RAM4W allows you to control all Radio functions including DSC Calling, Position Polling, Group Calling and more, or use the RAM4W to intercom between the main station or between other wireless RAM4W units. Built In AIS Receiver The Quantum GX6000 displays AIS target information (MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG) on the large front panel display. Having this information allows you to contact an AIS Ship directly using DSC, shows your vessels position in relation to AIS targets and alerts you when an AIS ship may be approaching too close to your location via the Closest Point of Approach (CPA) Alarm. Integrated 25W PA/Loud Hailer The Quantum GX6000 includes a 25W Loud Hailer with Fog signals; Bells and Whistles with listen back. For added benefit, the last selected VHF channel can be heard when in the PA or Fog modes and the AIS Display may be accessed and used. In addition, the Quantum GX6000 allows you to start a fog horn and then view the AIS page simultaneously. Integrated Voice Scrambler Loaded with an internal 32 code voice scrambler for private communications. the 32 code scrambler is compatible with all Standard Horizon 4 code scramblers already in use. Simply select a channel to be scrambled then select a common code between the transmitting and receiving radios and your communications are secure. Features: Integrated AIS Receiver** Built-in Speaker in microphone handset AIS / AIS SART target display: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG NMEA2000 and NMEA0183 compatible Programmable CPA and TCPA collision avoidance alarms Dual Zone 25W PA / Loud Hailer with preprogrammed fog signals and listen back GPS Compass, Waypoint and GPS status pages E2O Easy to Operate menu system Oversized rotary channel knob with push to enter Front panel microphone can be connected to rear panel and extended 20 feet using MEK-4 mic extension kit Capable of connecting two optional RAM4 or four Wireless RAM4W Integrated Voice Recorder to play back up to two minutes of RX receive audio Advanced 80dB Commercial Grade receiver with Local / Distance Attenuator Integrated 32 Code (FVP-42) and 4 Code (CVS2500A) Voice Scramblers Overall Dimensions 6.9"W x 4.3"H Flush-Mount Dimensions 6.2"W × 3.7"H × 6.2"D 3 Year Waterproof Warranty **Requires a separate dedicated AIS antenna

GX2400B Black VHF/AIS Integrated GPS/AIS/NMEA 2000 with 30W Hailer Power, Performance, Reliability! Featuring the GX2400 Matrix AIS/GPS/NMEA2000. NMEA2000 Plug and play NMEA 2000 interface. The integrated NMEA 2000 supports all PGN's for Navigation, GPS, AIS and DSC function. Simply plug the NMEA 2000 into your existing network to complement your system with full VHF and DSC features. Wireless Second Station RAM4W capability Wirelessly control all radio functions of the GX2400 with the interface of the RAM4W wireless Remote Access Microphone. Using the SCU-30 Wireless Access Point plugged into the back of the radio, you have the capability of syncing up to 4 RAM4W units. With an operating range of up to 65 feet, the RAM4W allows you to control all Radio functions including DSC Calling, Position Polling, Group Calling and more, or use the RAM4W to intercom between the main station or between other wireless RAM4W units. Built In AIS Receiver The GX2400 Matrix AIS/GPS/NMEA2000 displays AIS target information (MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG) on the large front panel display. Having this information allows you to contact an AIS Ship directly using DSC, shows your vessels position in relation to AIS targets and alerts you when an AIS ship may be approaching too close to your location via the Closest Point of Approach (CPA) Alarm. Integrated 30 Watt PA / Loudhailer Powerful 30 Watt integrated PA system with Loudhailer and listen back capabilities. Switch to fog horn mode to select any of the preprogrammed fog signals, with siren and horn features. For added benefit, the last selected VHF channel can still be monitored when in the PA or Fog modes. Integrated Voice Scrambler Loaded with an internal 32 code voice scrambler for private communications. the 32 code scrambler is compatible with all Standard Horizon 4 code scramblers already in use. Simply select a channel to be scrambled then select a common code between the transmitting and receiving radios and your communications are secure. Features: NMEA2000 and NMEA0183 Compatible Built-in Speaker in Microphone Handset Second station capability with wired RAM4 or wireless RAM4W (when used with the optional SCU-30 WiFi Module) Built-in integrated 66 channel GPS receiver Integrated 32 Code Voice Scrambler and 4 Code Voice Scrambler Noise canceling function for both receive and transmit audio Meets ITU-R M.493-15 Class D (Digital Selective Calling) Separate Receiver for CH70 (Receiving DSC Calls) AIS/AIS SART target display: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG E2O (Easy to Operate) Icon & Menu System Preset key stores up to 10 favorite channels Intercom Feature between the Radio and an Optional Second Station Programmable Scan, Priority Scan, and Multi Watch DSC position request and report functions GPS Compass, Waypoint and GPS status pages Enter, Save, and Navigate to a waypoint using the Compass page Navigation (LAT/LON, Time, SOG and COG) information is shown on display Programmable CPA (Closest Point of Approach) or TCPA (Time to Closest Point of Approach) alarms Commercial grade receiver (Spurious & Image rejection better than –80dB) 30 Watt PA/Loud Hailer with programmed fog signals and listen back GM (Group Monitor) Using DSC Group position Calling MOB (Man over Board) Operation Excellent Visibility with Busy LED Indicator Selectable Night Mode Display NOAA Weather Channels with Weather Alert

NMEA 2000 Compatibility Kit  This NMEA 2000 Kit allows Polk's Ultra Marine Certified P1 and PA4A to be seamlessly added to your boat's onboard NMEA 2000 network, enabling control and two-way communication from your boat's Garmin and Raymarine Chartplotter/Fish Finder Multi-Function Display (MFD) device. Control functions include source selection, playback functions, volume up/down and more.  Two-way communication between the Polk P1 and PA4A and your MFD also allows the display of source selection, song/track/album title (no album art), radio frequency and more to display on the MFD interface.  Comaptable With:  Polk PA4A receiver Polk P1 Marine receivers  In the Box: NMEA2000 interface module 12" NMEA 2000 cable 11" Y-adapter cable *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Engine Link NMEA 2000 Engine Monitor ENGINELink interface is an NMEA 2000 wireless device that allows mobile phones, iPads, and tablets to display engine data as well as provide a link to boat AIS, depth, and GPS information for popular apps such as Navionics, NavLink, iNavX, SavyNavy, AquaMaps and 100's more. Now boaters can have boat engine data plus their favorite charting app displayed on their mobiles and tablets in real-time. Engine information such as RPM, temperature, pressure, and battery voltage is displayed as an attractive dashboard display through the web browser so there’s no need for a custom app. Setup and installation are easy. Just “T” into the boat's NMEA 2000 backbone and ENGINELink is self-powered from the network. It creates a secure, password-protected local wifi network with up to 7 devices able to connect simultaneously. UDP and TCP-IP protocols are supported for compatibility with 3rd party apps. Either single or dual-engine installations are supported. If the vessel is fitted with NMEA 2000 compatible trim tabs or jack plates, then the status of these performance-critical systems is also displayed on the dashboard. You can configure ENGINELink through its own simple web interface - just open your web browser, enter its IP address and you'll access the attractive dash to display and configure your gauges. No complicated programming software or app is required. iOS and Android devices can display a navigation app and a web browser side by side - so you can have your favorite charting app open alongside engine instrument displays. You can change the network name & password and even merge the wifi to an existing wifi network on board. NMEA 2000 data can be viewed and logged in the web browser allowing for easy fault finding of issues. If the engine generates diagnostic alerts then these can be displayed and interrogated too. Features: Connect to any NMEA 2000-ready engine or network Built-in web gauge display – no app needed Display single or dual-engine gauges Configurable gauges – choose the parameters you want to monitor Set alarm/alert thresholds and view diagnostics TCP/UDP streaming of navigation data (GPS/AIS/Depth) for popular navigation apps Tank levels, fuel flow, and trip computer-type displays Tilt, trim tabs, and jack plate support Manufacturer-specific engine modes Specifications: Powered from NMEA 2000 Network – fits in seconds Password-protected wireless interface 802.11b/g/n AP or STA mode (can join another boat wifi network) TCP/UDP streaming of navigation data (AIS, GPS, and depth) to popular apps like Navionics, TZ, AquaMaps, iNavX etc Supported PGNs (1st Release) 127488, 127489, 127493, 130312, 130316, 127505, 130576, 128780 Preset gauge displays for leading manufacturers or customize your display Flexible, upgradeable interface Target Markets & Applications: Brings boat engine data to mobile devices Primarily aimed at the US center console and sports fishing market where outboard-powered craft have NMEA 2000 networks with engine data available but will work with any NMEA 2000 ready engine installation – inboard or outboard Provides additional data displays and extra functionality than MFDs Low-cost dashboard repeater accessible anywhere onboard Ideal test tool for service technicians Will be at the leading edge of electric propulsion PGN implementation Logging and replay of data for onshore analysis Support for the latest jack plate and trim tab PGNs, for optimizing boat performance Connects to Navionics app (and 100s more) for AIS, GPS, and depth data

4G Xtream Internet & NMEA 2000 Solution Digital Yacht's 4G Xtream is the latest, premium LTE (cellular) Internet access product. It ships as a complete package with dual external antennas, deck mounting hardware, and cabling. Alternative antenna mounts are available as options. Using MIMO technology and two external wideband LTE antennas, it offers fast connectivity at up to 300 MBs (network dependent). It has a built-in dual-band wifi router supporting multiple connections, dual SIM slots (with auto-failover if required), built-in GPS (for IOT and tracking applications) as well as an NMEA 2000 interface for navigation and instrument data connectivity and wireless interfacing. There’s also a Bluetooth interface for future connectivity applications. Features: Latest Cat 6 LTE MIMO technology with a range up to 25NM offshore (network dependent) Dual SIM slots with auto-failover or manual selection Two external, high gain, wide bandwidth antennas Dual-band integrated wifi router (2.4 & 5 GHz) –independently configurable Built-in NMEA 2000 interface to transmit NMEA 2000 data over the wireless and wired network to compatible apps Built-in GPS with external patch antenna for IOT and tracking applications Built-in Bluetooth with antenna for future applications 3 x LAN ports 1 x WAN port for additional internet connectivity –eg: WL510 high power wifi system Digital input/output connectivity for IOT/control applications (Available Q4 2021) SMS addressable

GPS 24xd GPS Antenna with Heading Sensor for NMEA 2000 Network - Black The GPS 24xd position receiver and antenna give users precise location with multi-band GNSS and heading accuracy even at slow speeds. Features: Navigate to more locations with expanded GNSS support Get high-sensitivity tracking with a fast GPS update rate Accurately pinpoint, regardless of speed It’s water-resistant (IPX7) to withstand the elements Install it easily with multiple mounting options The antenna is compatible with NMEA 2000® devices In the Box: GPS 24xd NMEA 2000® Pole mount Surface mount NMEA 2000 backbone/drop cable (6 meters) NMEA 2000 T-connector Documentation Specifications: Color: Black Dimensions (D x H): 3 19/32" x 1 15/16" (91.6 mm x 49.5 mm) Weight: 7.1 oz (201 g), white; 6.2 oz (176 g), black Cable Length: 19 ft 8" (6 m) Temperature Range: -22° to 176° F (-30° to 80° C), white; -22° to 149° F (-30° to 65° C), black Case Material: Fully gasketed, high-impact plastic alloy; waterproof to IPX7 Compass-Safe Distance: 5.9" (150 mm) Power Source Input: 9-32 Vdc Input Current: 150 mA at 12 Vdc NMEA 2000 Load Equivalency Number (LEN): 3 (150 mA) Position Accuracy, Typical Marine Use: < 1-meter CEP, < 3 meters, 95%

AcquaLink® MediaBox - NMEA 2000® Radio AM/FM/BT/USB The VDO Marine MediaBox can be mounted literally everywhere on the boat. Listen to radio and weather forecasts with its built in AM/FM Tuner or connect a MP3 player or smartphone via USB or Bluetooth to enjoy your favorite music. The MediaBox is NMEA 2000® certified and can be used with the VDO Marine AcquaLink® and OceanLink® TFT Displays. Additionally VDO Marine offers a free VDO Marine MediaBox App for your smartphone so the MediaBox can be used as a stand-alone radio.  Features: 9 to 16V AM/FM radio tuner with RDS  Bluetooth audio player with 50 m range  USB input  Equalizer with volume control  Power amplifier 4x 28W (D class)  NMEA 2000® certified  IPX5 protection rating  Operating temperature range -20°C/+70°C  Free VDO Marine MediaBox App WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000® Rib Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network. Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense. The equivalent of four T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are included and as they are removable, the network can be extended if needed. The Micro power cord provides a unique solution to quickly power your network that is easy to install, taking ‘Plug & Play’ to the next level. The NMEA 2000 Starter Kit 3 contains: A2K-MPC-1: NMEA 2000 Micro power cable, 3m UL certified cable A2K-TER-F: NMEA 2000 micro terminator female – to terminate one end of the network A2K-TER-M: NMEA 2000 micro terminator male – to terminate one end of the network A2K-4WT: Multi Drop T

GPSMAP® 1222 LiveScope Plus Bundle with LVS34 Transducer GPSMAP® 1222 Keyed Networking Chartplotter - No Sonar 12-inch Chartplotter Is All-in-1 Solution. Features: 12-inch color display with keypad interface and multifunction control knob High-sensitivity internal 10 Hz GPS and GLONASS receiver Fully network capable for Garmin Marine Network and NMEA 2000® plus NMEA 0183 support Supports optional BlueChart® g2 Vision® HD charts for Auto Guidance and other premium navigation features GPSMAP 1222 is designed for cruisers, sailors, and sailing racers who need the advanced all-in-1 solution provided by our 10-inch keyed chartplotter. Features a large, bright screen coupled with a quick and easy-to-use keypad interface with user-programmable keys and a multifunction control knob. Complete Network Sharing Garmin Marine Network support allows sharing of sonar, maps, user data, dome or open-array radar, IP cameras, and Panoptix™ sonar among multiple units. Includes NMEA 2000 network connectivity and NMEA 0183 support for autopilots, digital switching, weather, FUSION-Link, VHF, AIS, and other sensors. Built-in ANT® Connectivity Enjoy built-in ANT wireless connectivity directly to quatix® marine watch, Garmin Nautix™ in-view display, gWind™ Wireless 2 transducer, GNX™ Wind marine instrument, and wireless remote controls. The Ultimate Connected Boating App Built in Wi-Fi gives you access to the free all-in-one ActiveCaptain™ app, so you can manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your Garmin chartplotter, charts, maps and the boating community. Wherever you are, you’ll have unlimited access to your cartography, the ability to purchase new maps and charts and access to the Garmin Quickdraw™ Contours Community. Stay connected with smart notifications on your chartplotter screen. You can also plan a trip or prefish a lake, and ActiveCaptain will automatically sync with your chartplotter. Even get notifications for software updates, and decide when to download them on your device. Heading, Position Refreshed 10 Times per Second Fast, responsive built-in 10 Hz GPS and GLONASS receiver refreshes your position and heading 10 times each second to make your movement on the screen more fluid. It makes dropping up to 5,000 accurate waypoints — and finding your way back to them — quick and easy. Upgrade to Our Best Maps on the Water Two SD™ card slots provide expandable memory for accessory map purchases, such as LakeVü HD, LakeVü HD Ultra, BlueChart® g2 HD, or BlueChart® g2 Vision® HD, which adds Garmin patented Auto Guidance¹ and other great features. Built-in SailAssist Features To help you gain a wind-maximizing competitive edge, your chartplotter features a pre-race guidance page that shows your virtual starting line along with data fields showing laylines, time to burn before the start, and a race timer that can be synchronized across all your networked Garmin GPS products. In addition, other supported sailing features include an enhanced wind rose, heading and course-over-ground lines, set and drift, true and apparent wind data, and more. GPX Waypoints Transfer If you have waypoints, tracks, or frequently used routes stored on another manufacturer’s GPS product — or on a Garmin handheld device — it’s easy to transfer those items to your new Garmin chartplotter via industry-standard GPX software formatting. In The Box: GPSMAP 1222 chartplotter Power/data cable NMEA 2000 T-connector NMEA 2000 drop cable (2 m) Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim piece snap covers Documentation Connections: Garmin Marine Network™ Ports: 2 NMEA 2000® Port: 1 NMEA 0183 Input Ports: 1 NMEA 0183 Output Ports: 1 Video Input Ports:  1 BNC Video Output Ports: No Wireless Connectivity: Yes ¹Auto Guidance is for planning purposes only and does not replace safe navigation operations. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance. LiveScope™ Plus System with GLS 10™ & LVS34 Transducer THE BEST OF THE BEST JUST GOT BETTER The latest in LiveScope technology, the LiveScope Plus System offers improved resolution, reduced noise, clearer images, and better target separation. Features: See images clearly with improved screen clarity, transducer sensitivity, and target separation.  Scan surroundings with sharper images, reduced noise, and fewer sonar artifacts. Upgrade your current LiveScope System black box (GLS™ 10 sonar module) with just a new transducer.   Get maximum contrast and clarity in your images with vivid color palettes.  Don’t miss a thing with supported Forward, Down, and Perspective modes and the necessary mount. Real-Time Images Real-time sonar ensures that your live images are as accurate as possible.  Clear Vision See exactly what you need with reduced noise and fewer sonar artifacts that impede your picture of fish and structure.  Image Stabilization A built-in stabilization system keeps the sonar image on your compatible chartplotter steady, even in rough conditions.  Vivid Color Palettes Choose from seven vivid color options — including Aqua, Caribbean, Lava and more — to see fish and structure in maximum contrast and clarity.  Forward Mode Scout ahead of your boat to see what’s happening in real-time.  Down Mode Explore live views of the activity directly beneath your boat.  Perspective Mode See under the water with a view from your perspective above the water. In The Box: LiveScope GLS 10 sonar black box Panoptix LVS34 transducer Perspective mount Trolling motor barrel mount Shaft mount Power cable 2 meter Garmin Marine Network cable (small connector) Network adapter cable Documentation

M510BB 21 Black Box VHF with Black Command Mic & 3 Command Mic Ports Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied black CommandMic™ provides all the safety and communication functions for commercial and leisure boaters. Clean Installation for Limited Helm Space The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat. AIS Receive The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display). DSC Functionality and Remote Control In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: Black Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M510BB GW 21 Black Box VHF with White Command Mic & 3 Command Mic Ports Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied white CommandMic™ provides all the safety and communication functions for commercial and leisure boaters. Clean Installation for Limited Helm Space The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat. AIS Receive The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display). DSC Functionality and Remote Control In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: White Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)