M510BB 21 Black Box VHF with Black Command Mic & 3 Command Mic Ports Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied black CommandMic™ provides all the safety and communication functions for commercial and leisure boaters. Clean Installation for Limited Helm Space The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat. AIS Receive The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display). DSC Functionality and Remote Control In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: Black Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M510BB GW 21 Black Box VHF with White Command Mic & 3 Command Mic Ports Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied white CommandMic™ provides all the safety and communication functions for commercial and leisure boaters. Clean Installation for Limited Helm Space The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat. AIS Receive The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display). DSC Functionality and Remote Control In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: White Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M410BB 11 Black Box VHF with Black Command Mic & 2 Command Mic Ports Icom’s M410BB is a flexible black box mounted on a fixed mount that provides VHF communications for vessels with limited helm space. The supplied black CommandMic™ controls the radio for essential communications on the water. Clean Installation for Limited Helm Space The M410BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add an additional CommandMic™ to extend communication points for boats requiring a second communications station. This is ideal for boats that need communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: Black Remote Stations: Up to 2 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

M410BB GW 11 Black Box VHF with White Command Mic & 2 Command Mic Ports Icom’s M410BB is a flexible black box mounted on a fixed mount that provides VHF communications for vessels with limited helm space. The supplied white CommandMic™ controls the radio for essential communications on the water. Clean Installation for Limited Helm Space The M410BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add an additional CommandMic™ to extend communication points for boats requiring a second communications station. This is ideal for boats that need communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: White Remote Stations: Up to 2 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

FM4850 Black Box VHF Radio with GPS, AIS, DSC & Loudhailer The Ultimate 5-In-1 Tool of VHF Radios The FM4850 is a marine Black Box VHF radiotelephone with built-in Class D DSC, AIS Receiver, and Simplified Loud Hailer with intercom. Its compact housing enables it to be installed in a variety of craft, even vessels where space is limited, such as center-console boats.The FM4850 handset shares a common appearance with other Furuno equipment, such as NavNet TZtouch2, NavPilot 711C, and the FI70 Instrument series, offering an integrated appearance to any helm. Its built-in AIS Receiver can be used to overlay AIS targets with networked GPS Plotters or MFD's, such as NavNet TZtouch, NavNet TZtouch2, or GP1871F/GP1971F combo units. Built-In DSC & AIS  An external GPS antenna can be connected to the FM4850, and it can share its own GPS, DSC and AIS information via NMEA0183 or NMEA2000. When connected via NMEA2000 to any NavNet TZtouch2 MFD, DSC calling can be initiated directly from the TZtouch2 MFD by simply tapping on the AIS/DSC target and selecting [DSC Call]. Additionally, when MOB (Man Overboard) is activated on a TZtouch2 MFD, the FM4850 enters a special mode where you can initiate a distress call by simply pushing the rotary knob on the handset. Loud Hailer, Intercom & Listen Back Features The unit can operate as a simplified Loud Hailer with intercom, featuring 8 patterns of alert sounds. Loud Hailer, Fog Horn and Warning Signal features are all available, enhancing onboard safety and communications while navigating in the dark or fog. When connected with the second-station handset, intercom communications are available, allowing communications between the two devices. Additionally, the horn speaker can be used to collect external sounds and transmit them through the built-in speaker with a function called Listen Back. In this way, a person on the deck can easily communicate with the bridge, a particularly useful feature for a variety of fishing vessels and workboats. The Listen Back function can also be an effective tool on sport fishing vessels, allowing the horn speaker to collect the sound from fishing rods and lines when you get a strike. Features: NMEA2000 Certified VHF, AIS Receiver, 30-Watt Loudhailer, GPS*, Remote DSC & Multi-Station Intercom Up to 3-stations w/optional HS4800A full-function remotes (up to 30 meters) Single NMEA2000 connection for backup GPS*/AIS Receiver/Remote DSC  Outputs NMEA0183 Position, AIS and DSC data to legacy equipment IP67 waterproof transceiver, handset & speaker Simple installation thanks to its robust metal & waterproof black box design Initiate DSC calls directly from TZtouch2 MFDs (version 6.21 software) *Built-in GPS Receiver requires optional GPS Antenna, such as the GPA017 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RS100 Black Box VHF Radio with Handset & Speaker Navigate safely with the Simrad RS100 VHF marine radio. Stay connected from anywhere on your vessel with up to eight handsets (four wired and four wireless) and four external speakers. A modular system to fit any boat The RS100 is a modular VHF system that's expandable and customizable to suit any boat and any on-water communication needs. The standard package includes one wired handset and one external speaker. This setup is expandable up to eight handsets (four wired and four wireless) and four external speakers - ideal for use as an on-board intercom with Simrad HS40 wireless or HS100 wired handsets. The wireless handsets duplicate the radio display and controls on easy-to-read screens viewable under all lighting conditions, even bright sunlight.  All primary functions are accessible from the handset with channel scan and favorites, alphanumeric keypad, clear audio, handset station naming and 60-second audio rewind. Designed for Clear Communication This Class D DSC approved radio can make and receive DSC distress signals including your current position, and supports direct calling to other DSC-equipped radios. A dual-channel watch lets you monitor the current channel and emergency channel 16 (in the USA, tri-channel watch monitors the current channel, emergency channel 16, and calling channel 9). A record and replay feature helps to ensure you never miss an important call. The system includes one external speaker with additional outputs for up to four speakers and one optional loudhailer/foghorn. Features: Class D DSC approved VHF radio Integrated GPS receiver Connect up to four wireless and four wired handsets Add an optional loudhailer and up to four external speakers NMEA 0183® and NMEA 2000® connectivity 60-second audio rewind Configurable external speakers with volume offsetting Handset backlight settings can be grouped with NMEA 2000® backlight groups so MFD’s and VHF Radios can have backlight controlled together Track Buddy – track up to five “buddies” using their VHF MMSI

RS100-B Black Box VHF Radio with Class B AIS & GPS Antenna Navigate safely with the Simrad RS100-B VHF marine radio - integrated with a Class-B AIS transceiver and GPS. Stay connected from anywhere on your vessel with up to eight handsets (four wired and four wireless) and four external speakers. An external GPS-500 delivers advanced AIS functionality. Complete visibility with integrated AIS The RS100-B system features a Class-B AIS receiver and transmitter, so not only is your boat's position identifiable to nearby AIS-enabled vessels but theirs are also visible to you. The integrated AIS receiver is a valuable aid to help avoid collisions in crowded harbours and waterways. It monitors the location of all nearby AIS-enabled vessels, providing real-time information in any weather condition, night and day. AIS information can be viewed directly on the radio's screen or via a compatible multifunction device, as an overlay on a chart or radar screen. A modular system to fit any boat The RS100-B is a modular VHF system that's expandable and customisable to suit any boat and any on-water communication needs. The standard package includes one wired handset and one external speaker. This setup is expandable up to eight handsets (four wired and four wireless) and four external speakers - ideal for use as an on-board intercom with Simrad HS40 wireless or HS100 wired handsets. The wireless handsets duplicate the radio display and controls on easy-to-read screens viewable under all lighting conditions, even bright sunlight.  All primary functions are accessible from the handset with channel scan and favourites, alphanumeric keypad, clear audio, handset station naming and 60-second audio rewind. Features: Integrated Class-B AIS transmitter and receiver Bundled with dedicated GPS receiver, GPS-500 for AIS transmission Class D DSC approved VHF radio Connect up to four wireless and four wired handsets Add an optional loudhailer and up to four external speakers NMEA 0183® and NMEA 2000® connectivity 60-second audio rewind Configurable external speakers with volume offsetting Handset backlight settings can be grouped with NMEA 2000® backlight groups so MFD’s and VHF Radios can have backlight controlled together Track Buddy – track up to five “buddies” using their VHF MMSI

V100-B Black Box VHF Radio with Built-In AIS Transmitter & Receiver & External GP-500 GPS Antenna Stay safer on the water with the B & G V100-B VHF marine radio featuring a built-in GPS and Class B AIS transceiver, which allows you to see and be seen by AIS-equipped vessels. Stay connected from anywhere on board with up to 8 handsets (4 wired and 4 wireless) and 4 external speakers. Stay connected from anywhere on board with up to 8 handsets (4 wired and 4 wireless) and 4 external speakers. The system is comprised of a VHF Radio Black box (NRS-2), a handset, and a speaker. Add additional speakers or wireless handsets with charging stations as you need, for complete freedom onboard, and meaning there is no need for a handheld VHF. The radio systems replace the V90-B VHF and have been developed to allow wider integration possibilities through NMEA 2000® and 0183 while featuring improved user interfaces and design styles aligned to the new displays of B & G. V100-B Features: Integrated Class B AIS transmitter & receiver Bundled with a dedicated GPS receiver, GPS-500 for AIS transmission. Class D DSC-approved VHF radio Integrated GPS receiver Connect up to 4 wireless and 4 wired handsets Add an optional loudhailer and up to 4 external speakers NMEA 0183 and NMEA 2000® connectivity 60-second audio rewind Configurable external speakers with volume offsetting Handset backlight settings can be grouped with NMEA 2000® backlight groups so MFDs and VHF Radios can have backlight controlled together Track Buddy – track up to 5 “buddies” using their VHF MMSI In the Box: 000-15642-001 NRS-2 Black Box only 000-15650-001 H100 Handset 000-15651-001 SP100 - Speaker for Simrad and B & G Systems 000-13613-001 GPS-500 See & Be Seen with Integrated AIS* The V100-B includes a Class B AIS transceiver, which not only receives AIS targets but also transmits your boat’s position to nearby AIS-equipped vessels. This helps other mariners to spot your boat through any conditions, day or night. A built-in AIS receiver monitors the position of other AIS-equipped vessels, helping you to proactively avoid collisions in crowded harbors and waterways. AIS information can be viewed on the radio’s built-in screen or overlaid on your chart or radar screen through a compatible multifunction display. *V-100 has a receiver only Expandable with Additional Handsets & Speakers V100 series modular VHF radios come with 1 wired handset and 1 speaker, but you can add up to 4 more B & G H60 wireless and 3 more H100 wired handsets along with up to 3 additional external speakers, doubling your radio as an on-board intercom. Each wireless handset with inductive charging, duplicates your radio’s display and controls on a large, easy-to-read screen, viewable in all lights, with an intuitive user interface. Access all key functions with channel scan and favorites, an alphanumeric keypad, clear audio, handset station naming, and 60-second audio rewind.

M400BB VHF Marine Black Box Radio w/White Command Mic Black Box Transceiver When Space Is At A Premium Icom's M400BB is a VHF fixed mount with Class D DSC. The M400BB is a spacesaving unit, ideal for owners of compact boats and shipbuilders looking for a black box solution. The M400BB comprises only a black box main body and a supplied COMMANDMIC HM195 remote control microphone accessory. The two-piece radio set can easily be installed behind a wall or console-leaving a small or hidden footprint-and completely controlled from a remote position. Although compact in size, the M400BB possesses the same robust functionality found in Icom's M424 VHF fixed mount. Features include Class D DSC and the COMMANDMIC intuitive soft-key interface design. Active noise cancelling, a 10W loudspeaker and public address (PA) are built in for optimal audio performance. The M400MB is compatible with Icom's MA-500TR AIS transponder for additional safety at sea. Space-Saving, 2-Piece Configuration The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place. Intuitive User Interface The menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. Active Noise Cancelling The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly. 10W Loud Audio, Public Addres & Foghorn Built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker. Built-in Class D DSC The built-in DSC watch function monitors Ch.70 (DSC channel) actively, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls. Common NMEA Interface When connected to an external GPS receiver, current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity. AIS Target Call With MA-500TR When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR. Additional Features: MarineCommander™ compatible AquaQuake™ water draining function (HM-195SW) IPX7 waterproof protection both for IC-M400BB and HM-195SW (1M depth for 30 minutes) Dual/tri-watch function for monitoring Ch.16 and/or call channel Priority and normal scan Flexible installation Small foot print with 2-piece station Perfect for compact boats Comes with: Commandmic (HM195SW) DC Power cable Owner's manual Warranty: 3 years

RS90S Black Box VHF Radio with AIS & Hailer This exclusive RS90 VHF function is for safety, teamwork, convenience, and even just for fun. It’s a great feature that allows you to connect your VHF DSC position polling with chartplotter to show the location of up to three boating friends on the chart display. It’s also easy to set up: You need a RS90 fixed mount VHF, the MMSI number of your buddies’ VHF DSC radios and a Simrad GPS chartplotter. Your VHF will regularly poll your buddies’ positions, and the chartplotter will regularly update their locations by MMSI number on your screen. Track-Your-Buddy is a truly great aid in locational awareness of your friends in a group boating excursion. Features: Premium black box VHF Radio Continues the Simrad legacy in VHF radio Flexible options with wired & wireless handsets Enhanced features to support intra and inter vessel communication Receive GPS data from GPS: External SMA connector for GPS500 Antenna (000-13613- 6 Stations, 4 wired & 2 wireless, unmatched in the market Alpha numeric keypad for professional users Advanced radio features including AIS plot, waypoints and navigation Track Your Buddy when connected to a Navico MFD 30W PA/Hailer Horn output with Listen back feature Dedicated horn key for immediate and action, no menu fumbling Scrambler option for private communications Future features include DSC calls to AIS targets from handset and compatible MFD plus advanced intercom facilities Voice record 30 second rewind and listen back Additional Features: All International, CANADA, USA Channels Dual channel AIS receiver ATIS mode for European inland waterways Built-in hailer -- 30 Watts Built-in foghorn with 4 selectable patterns 2pin cable of external horn key to activate horn without handset Handset to built to meet JIS-7 Intercom facility between stations All International, CANADA, USA Channels 10 weather channel with 1050hz alert tone detect (for US) Selectable 25/1-watt Transmit Power DSC Capability Class D Support Private channels (able to vary by dealer at site by PC program) GPS Input for Automatic Time and Position Update NMEA 2000 Interface & NMEA0183 connectivity Local / Distance function Support Private channels (able to vary by dealer at site by PC program) GPS Input for Automatic Time and Position Update Local / Distance function Dual Watch/TRI Watch Function 3Ch functions All Channel Priority Scan Backlight sync between MFD and VHF handset 20 user Programmable names with MMSI. Call Log: 10 distress calls, and 20 individual calls for DSC communications

V100 Black Box VHF Radio Stay safer on the water with the latest multi-station V100 VHF marine radio from B&G. Stay connected from anywhere on board with up to 8 handsets (4 wired and 4 wireless) and 4 external speakers. The system is comprised of a VHF Radio Black box (NRS-1), a handset and a speaker. Add additional speakers or wireless handsets with charging stations as you need, for complete freedom onboard, and meaning there is no need for a hand held VHF. The new radio systems replace the V90 VHF and has been developed to allow wider integration possibilities through NMEA 2000® and 0183, while featuring improved user interfaces and design styles aligned to the new displays of B&G. V100 Key Features: Class D DSC approved VHF radio Integrated GPS receiver Connect up to 4 wireless and 4 wired handsets Add an optional loudhailer and up to 4 external speakers NMEA 0183 and NMEA 2000® connectivity 60 second audio rewind Configurable external speakers with volume offsetting Handset backlight settings can be grouped with NMEA2000® backlight groups so MFD’s and VHF Radios can have backlight controlled together Track Buddy – track up to 5 “buddies” using their VHF MMSI In the Box: 000-15641-001 NRS-1 Black Box 000-15650-001 H100 Handset 000-15651-001 SP100 - Speaker for Simrad and B&G Systems

  BLOWOUT SALE!  Garmin VHF 300 AIS Radio  The VHF 300 AIS Radio is a space-saving "black box" VHF, that offers support for multiple communication stations and options for dual band AIS receivers.  The design allows out-of-sight installation, enabling you to save valuable space on your instrument panel.  The entire device can be operated from a GHS 10, a full-function remote control that also works as a microphone.     "Black Box" design saves space at the helm Up to 25W transmission output All functions and settings are managed via the GHS 10 (supplied) 4" active speaker with volume knob (supplied) Initiate a VHF call directly from your Garmin NMEA 2000 plotter and VHF Full Class D Digital Selective Calling (DSC) with built-in DSC receiver NMEA 2000/NMEA 0183 interface Position tracking - locate and follow up to three other boats 2-way hailer function with compatible speaker Records 90 seconds of the latest call Three ports for additional VHF stations Use as intercom between stations       Specials    Closeouts   Remanufactured    Rebates  

M400BB VHF Marine Black Box Radio with Black Command Mic   Black Box Transceiver When Space Is At A Premium Icom's M400BB is a VHF fixed mount with Class D DSC. The M400BB is a spacesaving unit, ideal for owners of compact boats and shipbuilders looking for a black box solution. The M400BB comprises only a black box main body and a supplied COMMANDMIC HM195 remote control microphone accessory. The two-piece radio set can easily be installed behind a wall or console-leaving a small or hidden footprint-and completely controlled from a remote position. Although compact in size, the M400BB possesses the same robust functionality found in Icom's M424 VHF fixed mount. Features include Class D DSC and the COMMANDMIC intuitive soft-key interface design. Active noise cancelling, a 10W loudspeaker and public address (PA) are built in for optimal audio performance. The M400MB is compatible with Icom's MA-500TR AIS transponder for additional safety at sea. Space-Saving, 2-Piece Configuration The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place. Intuitive User Interface The menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. Active Noise Cancelling The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly. 10W Loud Audio, Public Addres & Foghorn Built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker. Built-in Class D DSC The built-in DSC watch function monitors Ch.70 (DSC channel) actively, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls. Common NMEA Interface When connected to an external GPS receiver, current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity. AIS Target Call With MA-500TR When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR. Additional Features: MarineCommander™ compatible AquaQuake™ water draining function (HM-195B/SW) IPX7 waterproof protection both for IC-M400BB and HM-195B/SW (1m depth for 30 minutes) Dual/tri-watch function for monitoring Ch.16 and/or call channel Priority and normal scan Flexible installation Small foot print with 2-piece station Perfect for compact boats Includes: Commandmic (HM195B) DC Power cable Owner's manual Warranty: 3 years

M605 Fixed Mount 25W VHF with Color Display Fixed Mount VHF with Flexible System Configurations - Bring on the Color! The M605 is not just a radio. It's a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as another station on the vessel along with two COMMANDMICS™. Customers will appreciate the radio's large bright display that includes night mode to view easily in the dark.  Configuration Flexibility The M605 gives the user flexibility in setting up their radio system on their boat. Remotely control up to three controllers using all the M605 functions with the HM-195 series COMMANDMIC™ and/or the RC-M600 Command Head. Either option can be used as an intercom between the radio and the unit, as well. Use one of the three combinations when setting up your M605: M605 + three COMMANDMICS, M605 + two COMMANDMICS + one Command Head, M605 + two Command Heads + one COMMANDMIC. Large Color Display Bring on the color. The M605's large 4.3" color TFT LCD display provides nearly a 180-degree viewing angle. The high-resolution characters and function icons along with the directional keypad and soft keys provide an intuitive user interface. The night mode screen provides comfortable operation in the dark. Most used functions are assigned to soft keys (at the bottom of the display) for quick one-push function access. The large ten-key pad enables users to smoothly enter channel numbers, MMSI numbers with ID names, and much more. NMEA 2000™ & NMEA 0183 Connectivity Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency, and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipment. Features: Active noise cancelling Last call voice recording saves the last two minutes of the last incoming call or start recording manually Integrated GNSS receiver Class D DSC Rear MIC connector Weather & alert channels AquaQuake® draining function Instant access to channel 16 and channel 09 call channel Specifications: Output Power: 25W Hailer: 30W listen back hailer Horn/Foghorn: Built-in GPS: GNSS antenna included Waterproof Rating: IPX8

M605 Fixed Mount 25W VHF with Color Display & AIS Fixed Mount VHF with Flexible System Configurations - Bring on the Color! The M605 is not just a radio. It's a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as another station on the vessel along with two COMMANDMICS™. Customers will appreciate the radio's large bright display that includes night mode to view easily in the dark. The full-featured M605 also gives customers the option of a radio with an integrated AIS receiver. The best just got better! Configuration Flexibility The M605 gives the user flexibility in setting up their radio system on their boat. Remotely control up to three controllers using all the M605 functions with the HM-195 series COMMANDMIC™ and/or the RC-M600 Command Head. Either option can be used as an intercom between the radio and the unit, as well. Use one of the three combinations when setting up your M605: M605 + three COMMANDMICS, M605 + two COMMANDMICS + one Command Head, M605 + two Command Heads + one COMMANDMIC. Large Color Display Bring on the color. The M605's large 4.3" color TFT LCD display provides nearly a 180-degree viewing angle. The high-resolution characters and function icons along with the directional keypad and soft keys provide an intuitive user interface. The night mode screen provides comfortable operation in the dark. Most used functions are assigned to soft keys (at the bottom of the display) for quick one-push function access. The large ten-key pad enables users to smoothly enter channel numbers, MMSI numbers with ID names, and much more. NMEA 2000™ & NMEA 0183 Connectivity Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency, and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipment. Integrated AIS Receiver The M605 with the integrated AIS receiver can show AIS vessel traffic information on the display. The AIS combo screen enables you to monitor the AIS plotter during basic operation. The M605 also allows the user to directly call a selected AIS target from the AIS screen using an individual DSC all. Features: Active noise canceling Last call voice recording saves the last two minutes of the last incoming call or starts recording manually Integrated GNSS receiver Class D DSC Rear MIC Connector Weather & alert channels AquaQuake® draining function Instant access to channel 16 and channel 09 call channel Specifications: Output Power: 25W Hailer: 30W listen to back hailer Horn/Foghorn: Built-in GPS: GNSS antenna included Waterproof Rating: IPX8