|
2.5 AMP Rapid Lithium Charger Only
This 2.5 amp hour rapid charger is designed for Vexilar Lithium batteries ONLY and works best when connected directly to the battery terminals using the supplied Gator clips. As the RAPID name implies, it is the best choice for many of the higher amp 12-volt batteries that you need to get a charge into quickly. The easy-to-understand charging lights make charging a snap. Green light signals to power or charge completely. The red light tells you the battery is charging. Blinking red is a warning that the battery is too cold to charge or the terminals are reversed. Special charging instructions to get the most out of your V-420L Rapid Charger can be found at www.vexilar.com.
|
31.20 |
|
|
12V - 12 AH MAX Lithium Battery with V-420L Rapid Charger
Vexilar’s MAX Lithium Battery delivers 12 volts and 12 amps of power, the most in its class to be a drop-in replacement for existing 12-volt SLA batteries with half the weight. When combined with the Vexilar 2.5 Amp Hour Rapid Charger, it is an unbeatable combination. Vexilar has put these two great products together to create the V-220L Combo Pack. It even comes with a set of gator clips to easily attach to the battery terminals, or directly using the Vexilar Quick Connect charging system.
FH1000 Fuse Holder
Mounted on the positive terminal of your battery are a fuse holder and fuse. Vexilar knows your battery can cause fires if a dead short happens, so we have taken the added safety precaution to include this fuse holder with a 3 amp fuse for your battery.
It comes standard with a 3 amp automotive fuse, but you can put in a size fuse from 3 amp to 10 amps.
If your sonar system does not power up, check to see if the fuse or fuse holder is loose.
If your sonar system does not power up, inspect the fuse itself, if the wire inside the fuse is burnt, the fuse must be replaced
Yes, your Vexilar can run without the fuse holder by connecting directly to the battery, but please use it whenever possible for safety purposes.
If for some reason you’ve lost your fuse holder or would like to put them on all your Vexilar systems, they are available directly at vexilar.com, part number: FH1000
Lightweight and powerful, the V-200L 12 Volt, 12 amp-hour Vexilar MAX Lithium battery has been designed to replace any current Vexilar Flasher/Pack battery. While you can use any of Vexilar’s chargers to charge this battery, due to the high amp capacity of this battery, it is recommended the Vexilar V-420L Rapid Charger be used so your battery can be fully charged overnight.
Features:
Drop-in replacement for any current Vexilar Flasher/Pack battery
LiFePO4 technology
Delivers twice the number of battery re-charging cycles over sealed lead-acid batteries
Half the weight of the sealed lead-acid battery
|
109.20 |
|
|
Mass 24/25-2 25 AMP 24V Battery Charger
The right choice for demanding conditions
Mass battery chargers are designed for the toughest conditions for professional, semi-professional, and recreational purposes. Even under the most extreme conditions, the products from the Mass series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies underpinning the Mass concept have long been proven. With an MTBF of 180,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply.
Powerful selling points:
Designed for the most difficult conditions.
Lightweight, stainless steel, anodized aluminum casing.
Coating of internal components prevents damage from dampness or condensation to ensure a longer lifespan.
Insensitive to electromagnetic effects from other devices.
Suitable for every type of battery, it also charges flat batteries.
It is delivered as standard with a temperature sensor.
Full power at temperatures of up to 45 degrees.
Load capacities from 80 to 1000 Ah or more.
Stable and ripple-free power supply, even without batteries.
The Current Control function prevents the breakdown of fuses when the voltage drops.
Parallel switching is possible using multiple battery chargers.
Connections in accordance with CE, ABYC A-31 and IEC60945.
GMDSS models and panels available.
Certified by RRR, RMRS (does not apply to 24/75 120 V).
Certified by DNV GL (only 24/25, 24/50, 24/75, 24/75 (120 V), 24/100 models).
GMDSS Compatible
The Mass series are designed for the most demanding situations. To help you comply with SOLAS regulations, all Mass battery chargers are GMDSS compatible. GMDSS stands for Global Maritime Distress and Safety System and allows users to monitor various alarm functions. GMDSS versions of the Mass 24/25 DNV, Mass 24/50, Mass 24/75, Mass 24/100, and Mass 24/100-3ph are available.
A separate remote panel is available, which is compatible with all Mass battery chargers.
A single front display with GMDSS remote panel is available for:
Mass 24/25-2 DNV
Mass 24/50-2
Mass 24/75, Mass 24/100, Mass 24/100-3ph
Charging Lithium Ion batteries
Although Lithium Ion batteries are increasingly popular, there can be a lack of clarity when it comes to the charging process. This is not a problem with Mastervolt as the Mastervolt battery chargers communicate directly with the Lithium Ion battery via the integrated MasterBus (or have been adapted to the required charging voltages).
MasterBus compatible
Mass battery chargers can be easily connected to a MasterBus network with only one cable and one connection. You can also choose central, local, or remote monitoring, configuration, and control of your system.
Made tough by smart design
The certified Mass battery chargers are very strong and designed to withstand heavy vibrations and shocks. Their premium quality components meet the highest possible specifications, while the smart and extra robust mounting adds to the professional end result.
Specifications:
Nominal output voltage: 24v
Total charge current: 25a at 28.5v
Number of battery outlets: 2
Charge current second output: 2a
Battery bank size: 50-250 ah
Nominal input voltage: 230v (180-265v), 50/60 Hz
Power supply mode: Yes
Galvanic isolation: Yes
Display/read-out: LED display
|
1141.13 |
|
|
ProMar1 DS Digital - 5 Amp - 1 Bank Charger
ProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with its all Digital Charging Technology. Fully Automatic with a 4-Stage Digital Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and a built-in Auto Maintain mode, safe for short and long term storage periods ensures your batteries are fully charged and maintained.
Features:
Fully Automatic 4-Stage Chargin
Dual Mode Charge Status Indicator
Battery & Wiring Fault Detection
Rugged Shockproof Construction
Auto Maintain/Energy Save Mode Extends Battery Life
Safe for Long and Short Term Storage
Pre-Wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals
Built-in Safety
Quiet EMI Design meets US FCC Emissions Requirements
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
119.99 |
|
|
BURKS 350GA6-2-5 1/8, PUMP AND MOTOR
UNSPSC Code: 40150000
|
3792.41 |
|
|
BURKS 375G6-2-5.88, BRONZE FITTED CENTRIFUGAL PUMP
Closed coupled centrifugal pump having 2-1/2" NPT Inlet x 2" NPT Outlet
features a voltage rating of 230/460 VAC
6.06 in impeller
Bronze fitted
UNSPSC Code: 40150000
|
3777.75 |
|
|
Ampco ICPLUS316-250TC, 2.5" X 1.5" 316SS Fluid End Only
The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.
Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.
The standard connection type is NPT (National Pipe Thread) or flange fittings.
Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.
The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.
|
2364.98 |
|
|
Square Post Clamp Base 2.5" Wide with 1.5" Ball
The RAM-247U-25 consists of a 2.5" clamp base with 1.5" ball.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.68 lbs.
|
19.99 |
|
|
Square Post Clamp Mount for Posts Up to 2.5" Wide
The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.55 lbs.
|
53.57 |
|
|
RAM® Square Post Clamp Mount for Posts Up To 2.5" Wide
The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.55 lbs.
|
51.59 |
|
|
Cat Pumps Crankcase Oil 2.5 Gallons
Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6105-2.5 contains 1 2.5 gallon container.
|
101.83 |
|
|
Scot Pump 35068-J-2.50 MOTOR/PUMP 2.5" IMPELLER
Pump
• All Bronze marine centrifugal pump Freshwater or seawater applications
• Precision machined to close tolerances for consistent performance.
• Hardware - Type 303 stainless steel
• Semi-open impeller handles solids
• Heavy-duty. Use for continuous 24 hour – 7 day operation.
• Stainless steel shaft.
Shaft Seal
• Rated at 75 PSI – 5 BAR
• Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components
Motor – 2 Pole
• Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements.
• Sealed ball bearings
• Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt
• Motors are dual frequency 50 Hz or 60 Hz
• Three phase motors are not available
|
1031.22 |
|
|
1 AMP Lithium Battery Charger Only
The technology of the 1 amp hour V-420 Lithium charger is designed primarily for use in charging Vexilar Lithium batteries, it is the first charger we know that is capable of charging both Lithium and SLA batteries very well. The easy-to-use charger lights show green when you have power and when the battery is fully charged. Red tells you the charging cycle has engaged. A blinking red light will warn you that the battery is cold or terminal polarity is reversed.
Special charging instructions for SLA batteries can be found at www.vexilar.com.
|
27.60 |
|
|
On-Board Precision Charger MK-345 PCL 3 Bank x 15 AMP LI Optimized Charger
Longer run times. Shorter charge times. The precision difference keeps anglers on the water longer and puts more fish in the boat. Now, the next generation of this legendary line of chargers has been optimized for 12-volt lithium (LiFePO4) batteries. Precision chargers feature battery-type selection by the bank, which now includes charge curves specially formulated for the high demands of lithium batteries, and can even wake these battery types from standby.
Features:
Battery Type Selection: Each charging bank can be selected to your specific battery type (Lithium (LiFePO4) AGM or flooded lead acid) to guarantee a safe, protected charge
Automatic Temperature Compensation: Precision chargers sense and adjust to ambient temperature fluctuations to ensure a fast, accurate charge
Low-Line Voltage Compensation: When outlets don't put out the 120 volts they are supposed to, Precision Chargers compensate to deliver a fast, consistent charge no matter what
Battery Equalization: Cleans and protects your battery (flooded lead-acid only) every time you plugin. Also activates a more rigorous, complete cleaning at the push of a button
Digital Control: Microprocessor-based design delivers a faster, more precise charge every time. Precision chargers can even wake dead 12-volt lithium (LiFePO4) batteries from standby automatically.
LED Indicator Lights: Inform of charge stage, maintenance mode status, error notifications, and full charge
Automatic Multi-Stage Charging: Controls the voltage and current your battery gets throughout the charging cycle, ensuring a fast, safe, and precise charge
Waterproof Construction: All on-board chargers are built to be waterproof, shock-resistant and vibration-resistant
3-Year Warranty: All battery chargers come with a full 3-year replacement warranty
Specifications:
Product Dimensions: 9.25 in x 11 in x 3 in
Product Weight: 14.5 lb
Charger Style: On-Board
Output per Bank: 15 amps
Wattage: 700W
Charge Time: 3-5 hours
Power Source: On-Shore AC
Battery Type: 12v Lithium LiFePO4, 12v AGM, 12v Flooded Lead Acid
12v Lithium-Ion (LiFePO4) Optimized: Yes
Waterproof: Yes
Digital Control: Yes
Automatic Temperature Compensation: Yes
Battery Equalization: Yes
Battery Type Selection: Yes
LED Display: Yes
Saltwater Compatible: Yes
Battery Connection: Ring Terminal
Warranty: Three-Year Warranty
|
389.99 |
|
|
On-Board Precision Charger MK-460 PCL 4 Bank x 15 AMP LI Optimized Charger
Longer run times. Shorter charge times. The precision difference keeps anglers on the water longer and puts more fish in the boat. Now, the next generation of this legendary line of chargers has been optimized for 12-volt lithium (LiFePO4) batteries. Precision chargers feature battery-type selection by the bank, which now includes charge curves specially formulated for the high demands of lithium batteries, and can even wake these battery types from standby.
Features:
Battery Type Selection: Each charging bank can be selected to your specific battery type (Lithium (LiFePO4) AGM or flooded lead acid) to guarantee a safe, protected charge
Automatic Temperature Compensation: Precision chargers sense and adjust to ambient temperature fluctuations to ensure a fast, accurate charge
Low-Line Voltage Compensation: When outlets don't put out the 120 volts they are supposed to, Precision Chargers compensate to deliver a fast, consistent charge no matter what
Battery Equalization: Cleans and protects your battery (flooded lead-acid only) every time you plugin. Also activates a more rigorous, complete cleaning at the push of a button
Digital Control: Microprocessor-based design delivers a faster, more precise charge every time. Precision chargers can even wake dead 12-volt lithium (LiFePO4) batteries from standby automatically.
LED Indicator Lights: Inform of charge stage, maintenance mode status, error notifications, and full charge
Automatic Multi-Stage Charging: Controls the voltage and current your battery gets throughout the charging cycle, ensuring a fast, safe, and precise charge
Waterproof Construction: All on-board chargers are built to be waterproof, shock-resistant and vibration-resistant
3-Year Warranty: All battery chargers come with a full 3-year replacement warranty
Specifications:
Product Dimensions: 9.5 in x 3 in x 14.5 in
Product Weight: 18.5 lb
Charger Style: On-Board
Output per Bank: 15 amps
Wattage: 900W
Charge Time: 3-5 hours
Power Source: On-Shore AC
Battery Type: 12v Lithium LiFePO4, 12v AGM, 12v Flooded Lead Acid
12v Lithium-Ion (LiFePO4) Optimized: Yes
Waterproof: Yes
Digital Control: Yes
Automatic Temperature Compensation: Yes
Battery Equalization: Yes
Battery Type Selection: Yes
LED Display: Yes
Saltwater Compatible: Yes
Battery Connection: Ring Terminal
Warranty: Three-Year Warranty
|
484.13 |
|