|
Evolution™ F Series 1200W, 120V Pure Sine Wave Inverter/Charger with 12V Input & 40 Amp Charger
Pure sine wave inverter/charger with 6 programmable charging profiles – 2, 3 and 4 stages with Equalization. For use with Lead Acid or Lithium Batteries. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.
Adaptive Battery Charger Option for Lead Acid Batteries
6 programmable charging profiles – 2, 3 and 4 stages with Equalization
Algorithm monitoring in the Bulk Stage assesses the battery’s condition. The remaining charging stages are based on the battery’s condition rather than a pre-set charging time.
Reduces excess charging time and extends life of battery
Transfer Switch
Zero transfer time when switching from Inverter to AC input source. When AC input source comes on, the inverter synchronizes with the incoming wave form and then transfers instantly at zero crossing without interruption to the load.
Surge Capacity (Active Power Boost)
The inverter has a surge capability of 3X its continuous power rating, allowing it to turn on loads with high starting surge.
Inverter loads can exceed the continuous power output by the Power Boost Allowances without triggering and overload fault.
There is no need to upsize to a larger inverter/charger to handle a heavy surge load, resulting in reduced costs.
Solar Input
Connect a solar charge controller (up to 50A) directly to the EVOTM though the Battery Charger External DC Input
External charging current is monitored to free up more power from the grid to be available to the load while charging.
ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those who want to operate primarily on solar power, even when the grid is available (when grid is costly).
State-of-the-Art Technology
Multiple physical points of protection monitoring are scanned up to 10,000 times per second to detect adverse internal and external conditions.
The EVO™ is practically indestructible. The EVO™ will detect fault conditions and initiate a healthy shutdown before any damage can be done.
AC Input / Output Option
AC Power Cord Inlet and Duplex GFCI outlet: EVO-1212F/1224F; hardwired: EVO-1212F-HW/1224F-HW
The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data, stored on a removable 16GB SD Card. Advanced features for programming various parameters and modes of operation. 4 rows of 20 character alpha numeric LCD display for messaging.
The EVO™ uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.
Applications:
Boats, RVs, trucks, specialty vehicles
Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
Back-up and emergency power applications
ABYC Compliant
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
837.54 |
|
|
Evolution™ F Series 1200W, 120V Pure Sine Wave Inverter/Charger with 24V Input & 40 Amp Charger
Pure sine wave inverter/charger with 6 programmable charging profiles – 2, 3 and 4 stages with Equalization. For use with Lead Acid or Lithium Batteries. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.
Adaptive Battery Charger Option for Lead Acid Batteries
6 programmable charging profiles – 2, 3 and 4 stages with Equalization
Algorithm monitoring in the Bulk Stage assesses the battery’s condition. The remaining charging stages are based on the battery’s condition rather than a pre-set charging time.
Reduces excess charging time and extends life of battery
Transfer Switch
Zero transfer time when switching from Inverter to AC input source. When AC input source comes on, the inverter synchronizes with the incoming wave form and then transfers instantly at zero crossing without interruption to the load.
Surge Capacity (Active Power Boost)
The inverter has a surge capability of 3X its continuous power rating, allowing it to turn on loads with high starting surge.
Inverter loads can exceed the continuous power output by the Power Boost Allowances without triggering and overload fault.
There is no need to upsize to a larger inverter/charger to handle a heavy surge load, resulting in reduced costs.
Solar Input
Connect a solar charge controller (up to 50A) directly to the EVO™ though the Battery Charger External DC Input
External charging current is monitored to free up more power from the grid to be available to the load while charging.
ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those who want to operate primarily on solar power, even when the grid is available (when grid is costly).
State-of-the-Art Technology
Multiple physical points of protection monitoring are scanned up to 10,000 times per second to detect adverse internal and external conditions.
The EVO™ is practically indestructible. The EVO™ will detect fault conditions and initiate a healthy shutdown before any damage can be done.
AC Input / Output Option
AC Power Cord Inlet and Duplex GFCI outlet: EVO-1212F/1224F; hardwired: EVO-1212F-HW/1224F-HW
The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data, stored on a removable 16GB SD Card. Advanced features for programming various parameters and modes of operation. 4 rows of 20 character alpha numeric LCD display for messaging.
The EVO™ uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.
Applications:
Boats, RVs, trucks, specialty vehicles
Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
Back-up and emergency power applications
ABYC Compliant
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
837.54 |
|
|
Evolution™ F Series 1200W, 120V Pure Sine Wave Inverter/Charger with 24V Input & 40 Amp Charger with Hard Wiring
Pure sine wave inverter/charger with 6 programmable charging profiles – 2, 3 and 4 stages with Equalization. For use with Lead Acid or Lithium Batteries. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.
Adaptive Battery Charger Option for Lead Acid Batteries
6 programmable charging profiles – 2, 3 and 4 stages with Equalization
Algorithm monitoring in the Bulk Stage assesses the battery’s condition. The remaining charging stages are based on the battery’s condition rather than a pre-set charging time.
Reduces excess charging time and extends life of battery
Transfer Switch
Zero transfer time when switching from Inverter to AC input source. When AC input source comes on, the inverter synchronizes with the incoming wave form and then transfers instantly at zero crossing without interruption to the load.
Surge Capacity (Active Power Boost)
The inverter has a surge capability of 3X its continuous power rating, allowing it to turn on loads with high starting surge.
Inverter loads can exceed the continuous power output by the Power Boost Allowances without triggering and overload fault.
There is no need to upsize to a larger inverter/charger to handle a heavy surge load, resulting in reduced costs.
Solar Input
Connect a solar charge controller (up to 50A) directly to the EVO™ though the Battery Charger External DC Input
External charging current is monitored to free up more power from the grid to be available to the load while charging.
ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those who want to operate primarily on solar power, even when the grid is available (when grid is costly).
State-of-the-Art Technology
Multiple physical points of protection monitoring are scanned up to 10,000 times per second to detect adverse internal and external conditions.
The EVO™ is practically indestructible. The EVO™ will detect fault conditions and initiate a healthy shutdown before any damage can be done.
AC Input / Output Option
AC Power Cord Inlet and Duplex GFCI outlet: EVO-1212F/1224F; hardwired: EVO-1212F-HW/1224F-HW
The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data, stored on a removable 16GB SD Card. Advanced features for programming various parameters and modes of operation. 4 rows of 20 character alpha numeric LCD display for messaging.
The EVO™ uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.
Applications:
Boats, RVs, trucks, specialty vehicles
Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
Back-up and emergency power applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
837.54 |
|
|
Evolution™ F Series 1200W, 120V Pure Sine Inverter/Charger with 12V Input & 60 Amp Charger with Hard Wiring
Pure sine wave inverter/charger with 6 programmable charging profiles – 2, 3 and 4 stages with Equalization. For use with Lead Acid or Lithium Batteries. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.
Adaptive Battery Charger Option for Lead Acid Batteries
6 programmable charging profiles – 2, 3 and 4 stages with Equalization
Algorithm monitoring in the Bulk Stage assesses the battery’s condition. The remaining charging stages are based on the battery’s condition rather than a pre-set charging time.
Reduces excess charging time and extends life of battery
Transfer Switch
Zero transfer time when switching from Inverter to AC input source. When AC input source comes on, the inverter synchronizes with the incoming wave form and then transfers instantly at zero crossing without interruption to the load.
Surge Capacity (Active Power Boost)
The inverter has a surge capability of 3X its continuous power rating, allowing it to turn on loads with high starting surge.
Inverter loads can exceed the continuous power output by the Power Boost Allowances without triggering and overload fault.
There is no need to upsize to a larger inverter/charger to handle a heavy surge load, resulting in reduced costs.
Solar Input
Connect a solar charge controller (up to 50A) directly to the EVO™ though the Battery Charger External DC Input
External charging current is monitored to free up more power from the grid to be available to the load while charging.
ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those who want to operate primarily on solar power, even when the grid is available (when grid is costly).
State-of-the-Art Technology
Multiple physical points of protection monitoring are scanned up to 10,000 times per second to detect adverse internal and external conditions.
The EVO™ is practically indestructible. The EVOTM will detect fault conditions and initiate a healthy shutdown before any damage can be done.
AC Input/Output Option
AC Power Cord Inlet and Duplex GFCI outlet: EVO-1212F/1224F; hardwired: EVO-1212F-HW/1224F-HW
The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data, stored on a removable 16GB SD Card. Advanced features for programming various parameters and modes of operation. 4 rows of 20 character alpha numeric LCD display for messaging.
The EVO™ uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.
Applications:
Boats, RVs, trucks, specialty vehicles
Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
Back-up and emergency power applications
ABYC Compliant
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
837.54 |
|
|
PowerCombi Pure Sine Wave Inverter/Charger - 1200W - 12V - 50A Kit
Simple. Independent. Flexible.
The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter/charger, it yet can easily be integrated into a MasterBus network (with additional interface).
With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion.
Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications.
Features:
Input voltage range: 10-15.5V DC
Includes temperature sensor and powercombi remote
Can be used with Flooded, Gel, AGM and custom battery types
MasterBus compatible via CZone - MasterBus Interface
|
986.40 |
|
|
PowerCombi Pure Sine Wave Inverter/Charger - 12V - 2000W - 100 Amp Kit
Simple. Independent. Flexible.
The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter/charger, it yet can easily be integrated into a MasterBus network (with additional interface).
With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion.
Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications.
Features:
Input voltage range: 10-15.5V DC
Includes temperature sensor and powercombi remote
Can be used with Flooded, Gel, AGM and custom battery types
MasterBus compatible via CZone - MasterBus Interface
Specifications:
Amperage: 100 Amps
Amperage Draw at Rest: 3 Amps (idle power)
Multi Bank Chargers: 1 Bank
Output Wave Form: Pure Sine Wave
Type: Inverter/Charger
Voltage: 12V DC
|
1156.80 |
|
|
350W Pure Sine Wave Inverter - 12V
SSW Series
SSW Series high efficiency pure sine wave inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. Newly designed, these compact and lightweight models feature soft start technology and 2X the surge. Economically priced for reliable pure sine wave power.
Includes 2 three prong outlets and a USB charging port.
Features:
USB Charging Port
2 three prong outlets
Comes with battery clamps
High performance, high surge power (2X)
True sine wave output for sensitive loads
Economically priced
Samlex “Soft Start” & “Low Interference” technology
Universal Circuit Protection: thermal, battery, overload, short circuit & earth fault
Cool surface technology
Specifications:
Input: 12 VDC
Output: 115 VAC
Watts: 350 Watts
Surge: 700 Watts
Outlets: 2
Fuse: 50 Amps
Weight: 2 (lbs)
Weight: 0.9 (kg)
Dimensions: 6.10 x 8.86 x 2.32 (in)
Dimensions: 15.5 x 22.5 x 5.9 (cm)
Safety: ETL
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, DVD, video games
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
115.37 |
|
|
600W Pure Sine Wave Inverter - 12V
SSW Series
SSW Series high efficiency pure sine wave inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. Newly designed, these compact and lightweight models feature soft start technology and 2X the surge. Economically priced for reliable pure sine wave power.
Includes 2 three prong outlets and a USB charging port.
Features:
USB Charging Port
2 three prong outlets
Comes with battery clamps
High performance, high surge power (2X)
True sine wave output for sensitive loads
Economically priced
Samlex “Soft Start” & “Low Interference” technology
Universal Circuit Protection: thermal, battery, overload, short circuit & earth fault
Cool surface technology
Specifications:
Input: 12 VDC
Output: 115 VAC
Watts: 600
Surge: 1200 Watts
Outlets: 2
Fuse: 80 Amps
Weight: 2.4 (lbs)
Weight: 1.1 (kg)
Dimensions: 6.10 x 10.0 x 2.32 (in)
Dimensions: 15.5 x 22.5 x 5.9 (cm)
Safety: ETL
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, DVD, video games
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
189.82 |
|
|
EVO-4248SP 4200W 120/240 VAC Split Phase Inverter/Charger with 60 AMP
Split phase pure sine wave inverter, adaptive battery charger, and transfer relay – ALL in ONE device. Samlex EVOLUTION™ Series Inverter/Chargers provide reliable AC power wherever it’s needed.
This 4200 watt, 120V /240V split phase inverter/charger connects to a standard electrical household panel. When you combine it with a 48V battery bank and a solar system you can run a fully equipped off-grid cabin, a remote mobile construction site, or use it as an emergency backup system.
Intelligently integrates a 60 Amp, 4-stage Battery Charger and a 40 Amp Transfer Relay into an advanced and affordable off-grid power solution. For use with Lead Acid or Lithium-ion batteries.
Optional EVO-RC-PLUS remote control for ease of programming and monitoring.
Features:
120 / 240 VAC Split Phase (Dual Phase)
The split-phase inverter connects to the standard household panel to provide both 120 and 240 VAC output power
AC Input
One AC input for grid or for generator, no need to reconfigure when the different power source is available.
AC input is programmable for voltage and frequency. The user determines what the min and max thresholds are to switch from Grid or Generator to Inverter.
Generator start can be initiated by “Status Relay” contact and can be programmed to activate when the grid is lost.
Solar Input
Connect a 48V MPPT solar charge controller directly to the EVOTM through the 100 Amp Battery Charger external DC Input, seamlessly integrating solar charging into the EVO’s power system.
ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those wishing to operate primarily on solar power (when the grid is available but costly).
Battery Charger
3 or 4 stages charging with Equalization (must be manually initiated).
An adaptive algorithm is used during Bulk to assess the condition of lead-acid batteries. Subsequent stages are then based on the condition of the battery rather than pre-set time periods for Absorption and Float. Prevents unnecessary charging, and extends the life of batteries.
Programmable – set battery voltage thresholds to initiate charging. Specific programmable settings for Lithium-ion batteries.
Transfer Switch
Zero transfer time when switching from Inverter to Grid. When the grid comes on, the inverter synchronizes with the waveform and then transfers instantly at zero crossing.
<16ms transfer when going from Grid to Inverter. When the grid is lost, the transfer relay switches to the inverter at the correct place in the waveform for no power disruption.
Surge Capacity (Power Boost)
3X surge power for high surge loads on start-up, such as compressor or refrigerator
Additionally, the EVOTM has power overload allowances available for short periods of time. Overload allowances decrease with the length of time. Increased inverter capacity, or “Active Power Boost,” means you can size your inverter smaller to handle heavy surge loads, reducing costs.
State-of-the-Art Technology
The EVOTM operates at 165 million instructions per second producing lightning fast load and response times
The EVOTM is practically indestructible. It has “Bullet-Proof Intelligence” in the form of 9 physical points of protection monitoring being scanned up to 10,000 times per second for adverse conditions. The EVOTM will detect fault conditions and initiate a healthy shutdown before any product damage can be done.
The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data. Records all detected faults and the conditions leading up to them. Data is stored on a removable 32GB SD Card (in the remote). Use data to analyze trends for more efficient use of system resources
The EVOTM uses five temperature sensors placed throughout the unit to determine the operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.
Specifications:
Input: 48 VDC
Output: 120 / 240 VAC Split Phase
Watts: 4200 Watts
Surge: 12600 Watts
Outlets: Hardwired
Fuse: External
Remote Control: EVO-RC-PLUS (Optional)
Weight: 64 lbs
Weight: 29 kg
Dimensions: 12.8 x 16.3 x 8.35 in
Dimensions: 324 x 415 x 212 mm
Safety: CSA Listed, Conforms to: CAN/CSA STD. C22.2 No. 107.1-16 and UL Std No. 1741 2nd Ed. EMI/EMC Compliant with FCC Part 15(B), Class A
Applications:
Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
Back-up and emergency power applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1749.41 |
|
|
300W Pure Sine Wave Inverter - 12V
PST Series (120 VAC)
This high efficiency DC-AC inverter converts 12 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.
Features:
High efficiency
Temperature controlled cooling fan – reduces energy consumption
Low interference Wide operating DC input range: 10.5 - 16.5 VDC
LED indicators for power and protections
Low idle power draw
Dual GFCI protected AC outlets
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Detachable cable with 12V plug adapter
Detachable cable with battery clamps
Safety certified to UL standards, FCC compliant
Specifications:
Input: 12 VDC
Output: 120 VAC
Watts: 300
Surge: 500 Watts
Outlets: 2
Weight: 3.46 (lbs)
Weight: 1.57 (kg)
Dimensions: 6.1 x 9.69 x 2.58 (in)
Dimensions: 155 x 246 x 65.5 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
214.63 |
|
|
1500W Pure Sine Wave Inverter - 12V
PST Series (120 VAC)
This high efficiency DC-AC inverter converts 12 Volts DC to 1500 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs or can be hard-wired. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1 Amp. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.
Features:
High efficiency
Can be hard wired
Temperature controlled cooling fan – reduces energy consumption
Low interference
Wide operating DC input range: 10.7 - 16.5 VDC
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Low idle power draw
Dual GFCI protected AC outlets
Optional remote control (sold separately): Model RC-200
Safety certified to UL standards, FCC compliant
Specifications:
Input: 12 VDC
Output: 120 VAC
Watts: 1500
Surge: 3000 Watts
Remote Control: RC-200 sold separately
Weight: 15.6 (lbs)
Weight: 7.1 (kg)
Dimensions: 10.35 x 18.43 x 4.16 (in)
Dimensions: 263 x 468.2 x 105.6 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
584.72 |
|
|
2000W Pure Sine Wave Inverter - 12V
PST Series (120 VAC)
This high efficiency DC-AC inverter converts 12 Volts DC to 2000 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1 Amp. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.
Features:
High efficiency
Can be hard wired
Temperature controlled cooling fan – reduces energy consumption
Low interference
Wide operating DC input range: 10.7 - 16.5 VDC
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Low idle power draw
Dual GFCI protected AC outlets
Optional remote control (sold separately): Model RC-200
Safety certified to UL standards, FCC compliant
Specifications:
Input: 12 VDC
Output: 120 VAC
Watts: 2000
Surge: 3500 Watts
Remote Control: RC-200 sold separately
Weight: 15.6 (lbs)
Weight: 7.1 (kg)
Dimensions: 10.35 x 18.43 x 4.16 (in)
Dimensions: 263 x 468.2 x 105.6 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
773.32 |
|
|
600W Pure Sine Wave Inverter - 12V
PST Series (120 VAC)
This high efficiency DC-AC inverter converts 12 Volts DC to 600 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.
Features:
High efficiency
Temperature controlled cooling fan – reduces energy consumption
Low interference Wide operating DC input range: 10.7 - 16.5 VDC
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Low idle power draw
Dual GFCI protected AC outlets
Optional remote control (sold separately): Model RC-15A
Comes with pin-type battery cable lugs
Safety certified to UL standards, FCC compliant
Specifications:
Input: 12 VDC
Output: 120 VAC
Watts: 600
Surge: 1000 Watts
Remote Control: RC-15A sold separately
Weight: 5.9 (lbs)
Weight: 2.7 (kg)
Dimensions: 9.37 x 10.87 x 3.23 (in)
Dimensions: 238 x 276.2 x 82 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
266.87 |
|
|
3000W Pure Sine Wave Inverter - 12V
PST Series (120 VAC)
This high efficiency pure sine inverter converts 12 Volts DC to 3000 Watts of AC power at 120 Volts, 60 Hz. Features include temperature controlled cooling, low interference, wide temperature operating range, overload protection, low battery alarm / shut down & low idle power draw. AC power is available from dual NEMA-20R GFCI outlets on the front panel, the unit is also hard wire capable. Safety certified to UL and CSA standards, FCC Compliant.
Optional LCD remote control, model RC-300.
Features:
High efficiency & low RF emissions
Can be hard wired
2x Surge
Wide DC input range
Dual GFCI Protected Outlets
Wide temperature operating range -20 to +40°C / -4 to +104°F
Temperature controlled cooling fan
Low idle power draw
Remote Input – Use to turn inverter ON or OFF with ignition start or any other Remote ON/OFF switch
Optional LCD remote control, model RC-300
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Safety certified to UL & CSA standards, FCC compliant
Specifications:
Input: 12 VDC
Output: 120 VAC
Watts: 3000 Watts
Remote Control: RC-300 Optional
Weight: 21.6 (lbs)
Weight: 9.8 (kg)
Dimensions: 10.35 x 17.97 x 5.71
Dimensions: 263 x 456.5 x 145 (mm)
Safety: UL, CSA
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1087.50 |
|
|
300W Pure Sine Wave Inverter - 24V
PST Series (120 VAC)
This high efficiency DC-AC inverter converts 24 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.
Features:
High efficiency
Temperature controlled cooling fan – reduces energy consumption
Low interference Wide operating DC input range: 21.0 - 33.0 VDC
LED indicators for power and protections
Low idle power draw
Dual GFCI protected AC outlets
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Detachable cable with 12V plug adapter
Detachable cable with battery clamps
Safety certified to UL standards, FCC compliant
Specifications:
Input: 24 VC
Output: 120 VAC
Watts: 300
Surge: 500 Watts
Weight: 3.46 (lbs)
Weight: 1.57 (kg)
Dimensions: 6.1 x 9.69 x 2.58 (in)
Dimensions: 155 x 246 x 65.5 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
214.63 |
|