Eskimo Cup Holder - 12VDC  The Dometic Eskimo Cup is a thermoelectric refrigerated cup holder. It is designed to accommodate mounting into surfaces of various thicknesses. A polished marine-quality 316 stainless-steel trim ring finishes the surface installation and is accented with two blue LED interior lights. Features: Keeps cold beverages chilled while you drink them, even on a hot day Holds beverage containers up to 20 ounces (591 ml) Replaces most standard cup holders and is easy to install Polished 316 stainless steel trim ring Blue LED interior lights DC-powered premium thermoelectric Peltier cooling element Easy to keep clean with a non-stick aluminum surface and built-in drain Electronics are completely sealed for protection against salt spray Safety features include a low-voltage cut off to avoid a dead battery, a high-voltage cut off to prevent damage to the unit, a high-heat cut-off, and an in-line fuse 4" recessed cup holder Powered by the house battery *Sold as an Individual WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - White Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: White

Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - White Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: White

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - Grey Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - Grey Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

Cup Holder - 316 Stainless Steel Features: Stainless Steel Cup Holder @3.25ID Matches our ELITE Series Rod & Cup Holders Cutout Diameter: ø3.5” Flange Diameter: 4.75″ Ø1/2 Drain Barb Adhesive Tape / Gasket Installation – Included 316L Stainless Steel

Sandbar Slug Portable Cup Holder Portable Cup Holder Features: Easily adjusts for 15° and 30° rod holders Keeps your drinks readily available Add extra drink holders in an instant Perfect for the sandbar

Plastic Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" Holes Threaded Backing Plates for replacing existing ø3-3/4 cup holders with ROUND ABS PLASTIC Combination Rod & Cup Holders. Screws are included. For use with Round Top ABS Plastic Only in a ø3-3/4 existing hole.

Stainless Steel Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" Holes Threaded Backing Plates for replacing existing ø3-3/4 cup holders with round SST plastic combination rod and cup holders.  For use with round top SST plastic only in a ø3-3/4 existing hole. Features: Screws are included

Offset Triple Rod Holder w/Cup Holders - Port Side - Polished Aluminum Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding rigging tools as well as a drink Constructed of anodized aluminum and white liner to protect rods

Offset Triple Rod Holder with Cup Holders - Starboard Side - Polished Aluminum Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding rigging tools as well as a drink Constructed of anodized aluminum and white liner to protect rods

Triple Rod Holder w/Cup Holders - Port Side & Starboard Side - Polished Aluminum  Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding rigging tools as well as a drink Constructed of anodized aluminum and white liner to protect rods

RAM® Drink Cup Holder for Tracks Designed for use with the track mounting system on your boat, kayak or cooler, the RAM® Drink Cup Holder for Tracks is the perfect cradle for your beverage when out on the water. Fitting a variety of cup sizes, a slot on the side even accommodates your favorite cup or mug with a handle. A drain hole at the bottom of the holder helps to prevent any buildup of residue, while hook slots on the side of the holder are perfectly placed for lures. The Drink Cup Holder is compatible with all versions of the RAM Tough-Track™, and features two attachment points – on the side for attaching to vertically mounted tracks, and on the bottom for attaching to horizontally mounted tracks.  Common Beverage Sizes: - 12oz Cans - Water Bottles - Insulated Cups - 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Rod/Cup Holder - 304 Stainless Steel - 0° Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place.  Features: 304 S.S. 0° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 0° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"

Rod/Cup Holder - 304 Stainless Steel - 15° Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place.  Features: 304 S.S. 15° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 15° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"