|
120V AC Shore Power Relay - Wired
The 120VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel.
This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 120VAC systems.
Features:
Coil Voltage: 120VAC
Contact Current: 10A
|
83.60 |
|
|
Shore Power Relay - 240V
The 240VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 240VAC systems.
Features:
Coil Voltage: 240VAC
Contact Current: 10A
Works with MTC and Siren 3 Pro
|
122.29 |
|
|
Switch, AC 120V AC 30A OFF+2 Position
Features:
Switches between 2 - 120v AC shore power sources and 1 - 240v AC Source to 2 - 120v AC load groups
Switches both lines (hot) and neutral
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two different AC sources to one circuit
Mounts in panels up to 0.16" (4.00mm) thick
Heavy duty industrial rated switch
Intuitive function - One hand operation
UL listed
600 Volt AC max
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
219.14 |
|
|
3117 - SMS Panel Enclosure with 2 ELCI (30A) - 120V AC
The 3117 panel enclosure is built for Equipment Leakage Circuit Interrupters (ELCI) main circuit breakers and other large frame devices. Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10' of AC shore power inlet.
Features:
Blank apertures for custom breaker loading
Glass filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for back lighting and ON indication
Technical Specifications:
Circuit Breaker Type - 2 x ELCI (30A) Main 120V
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 2 x Red (Reverse Polarity - 120V AC and 2 x Green ON (120V AC)
In the Box:
3117 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
836.00 |
|
|
3118 - SMS Panel Enclosure with ELCI (50A) and 2 Blanks - 120V AC
The 3118 panel enclosure is built for Equipment Leakage Circuit Interrupters (ELCI) main circuit breakers and other large frame devices. Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10' of AC shore power inlet.
Features:
Blank apertures for custom breaker loading
Glass filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for back lighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x ELCI Main (50A) 120V and 2 x Blanks
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 1 x Red (Reverse Polarity - 120V AC and 3 x Green ON (120V AC)
In the Box:
3118 Enclosure
Glands x 5
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
685.79 |
|
|
3128 - SMS Panel Enclosure with ELCI (30A) & 3 Branch (15A) - 120V AC
The 3128-panel enclosure is built for Equipment Leakage Circuit Interrupters (ELCI) main circuit breakers and other large frame devices. Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10' of AC shore power inlet.
Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x ELCI (30A) Main 120V and 3 x Branch (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 1 x Red (Reverse Polarity - 120V AC and 4 x Green ON (120V AC)
In the Box:
3128 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
|
628.21 |
|
|
10/240V AC Rotary 65A OFF + 2 Sources 2x120V/1x240V
Features:
Switches between two 120V AC shore power sources and one 240V AC source to two 120V AC load groups
Red reverse polarity LED indicators
Green power available LED indicators
Specifications:
Source Selection: 2
Niminal Voltage: 120/240V AC
Source In: 3
Height: 4.75"
Width: 4.88"
Depth: 4.50"
Weight: 3.50lbs
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
543.49 |
|
|
AC Rotary Switch Panel 65 AMP - 2 Positions + OFF - 4 Pole
Features:
Switches between 2-120V AC shore power sources
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Red reverse polarity LED indicators
Green power available LED indicators
Switches AC sources
Compact solution when circuit protection is provided elsewhere
Allows connecting one of two or three different AC sources to one circuit
Includes heavy duty industrial-rated switch
Red reverse polarity LED indicators
Green power-available LED indicators
Specifications:
Positions: 2 + Off
Nominal Voltage: 240v AC
Poles: 4
Maximum Amperage: 65A
Source In: 3
Height: 3.75"
Width: 5.25"
Depth: 4.5"
Included:
(1) 9093 AC Rotary Switch - OFF + 2 Positions 120/240v AC 65A
(1) 9583 AC Rotary Panel Labels
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
513.01 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 75'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 75'
Neutral Wire: No
Female End: Yes
Application: Isolation transformer cordset
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3621.65 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 100'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 100'
Neutral Wire: No
Female End: Yes
Application: Isolation transformer cordset
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3843.73 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 125'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 125'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3316.82 |
|
|
100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 100'
All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.
Features:
For use with 100 amp 120V/208V shore power systems
High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)
Ergonomic non-slip TPE coated gripping surfaces
IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.
Internal frame terminals provide high clamping force for safe and secure contact
Options for use with on-board isolation transformers and male plug only power supply purposes
UL and ABYC approved components
Specifications:
Length: 100'
Neutral Wire: No
Female End: No, Blunt Cut
Application: Cable Winch with Isolation Transformer
Color: Yellow
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2870.32 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
PAM4 Wired DC Relay
The Siren Marine DC Accessory Relay allows users to control any 12v onboard devices, such as A/C, deck or spreader lights, sirens, or strobe lights.
Dimensions: 1.5x0.75x1.19in (box) 11.3in (wire)
Relay may be energized across a wide voltage range from 9VDC to 32VDC.
Ideal for 12VDC and 24VDC circuits.
20mA operating current is constant across the operating range.
Input voltages are polarity-sensitive and diode-protected.
Relay is required to power or switch 12V systems that draw more than 1 Amp via the internal outputs of the MTC.
Works with MTC and Siren 3 Pro
|
33.68 |
|
|
Wired Shore Power Sensor Plug
The Shore Power Sensor Plug allows boaters to monitor system-critical shore power from anywhere. Receive an alert in the event that shore power is lost and avoid costly system shutdown. The Shore Power Sensor Plug is ideal for larger vessels relying on external power sources to run critical systems while on the dock.
Specifications:
Dimensions: 3ft (wire) 2.5x1.5in (body)
Standard AC to DC adapter, 3V DC output
Plugs into AC outlet
Works with MTC and Siren 3 Pro
|
87.35 |
|